Rogers PCB Board

Rogers PCB Made on RO3035 10mil 0.254mm DK3.5 with Immersion Gold for Patch Antenna for Wireless Communications (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Rogers RO3035 high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It was designed to offer exceptional electrical and mechanical stability at competitive prices. The mechanical

This custom 6-layer hybrid rigid PCB adopts RO4003C hydrocarbon ceramic substrate combined with Tg170℃ FR4 dielectric materials. With 1oz finished copper on each conductive layer and 1.74mm finished lamination thickness, the PCB features dual-side green solder mask with white legend and hard electrolytic gold plating. Sized 127mm×103mm (1pcs, including process edge), it complies with IPC-Class-3 standard with 25μm hole copper thickness, configured with L1-L2 & L5-L6 blind

This customized 2-layer rigid high-frequency PCB utilizes Rogers RT/duroid 5880 glass microfiber reinforced PTFE composite, engineered for ultra-low-loss millimeter-wave and high-precision RF/microwave circuit applications. It features immersion gold surface finishing with no silkscreen or solder mask on either side. Every finished unit is 100% electrically tested prior to shipment to deliver stable, reliable and consistent electrical performance. PCB Specification Parameter

This PCB is a custom 2-layer rigid high-frequency board fabricated using Rogers RO4835 hydrocarbon dielectric laminate, designed for cost-effective, high-stability RF and microwave circuit applications. It features an immersion gold surface finish, black silkscreen on the top side only (no bottom silkscreen), and a completely solder mask-free double-sided structure. All solder pads are kept free of silkscreen to ensure consistent soldering quality. PCB Specification Parameter

This custom single-layer rigid high-frequency PCB utilizes Rogers TMM10 thermoset microwave composite laminate, delivering combined advantages of ceramic and PTFE substrates with improved manufacturability. It features solder mask-free and silkscreen-free construction with OSP surface finish, all units are 100% electrically tested before delivery to ensure reliable structural integrity and stable RF/microwave performance for precision high-frequency applications. PCB

This custom 2-layer rigid high-frequency PCB utilizes Rogers DiClad 527 fiberglass-reinforced PTFE substrate, engineered for high-precision, low-loss RF and microwave circuit applications. The board is constructed with immersion gold surface finishing, black silkscreen printing on the top layer, no bottom silkscreen, and a double-sided solder mask-free structure. PCB Specification Parameter Item Specification Base Material Rogers DiClad 527 high-frequency PTFE composite

This custom 2-layer rigid high-frequency PCB is fabricated from Rogers TMM6 ceramic-reinforced thermoset polymer composite laminate, a high-reliability dielectric material engineered for high-performance stripline and microstrip microwave circuit applications. The PCB features a nickel-free EPIG surface finish with a double-sided structure free of solder mask and silkscreen. All finished units are subjected to 100% electrical testing prior to delivery, ensuring superior

Rogers DiClad 880 High Frequency PCB Double Layer 20mil 0.508mm With Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description This is a type of Rogers high frequency PCB built on DiClad 880 laminates, double layers with signal layer on top side, shielding layer on bottom side. It is plated with immersion gold, no solder mask or silkscreen. It’s fabricated using 20mil substrates, 0.5oz copper

Rogers DiClad 880 High Frequency PCB 20mil 30mil 60mil with Gold, Tin and Silver (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Brief Introduction Rogers DiClad 880 PCBs are woven fiberglass reinforced, PTFE-based composites (without ceramic fillers) that offer lower dielectric constant and dissipation factors by using fewer plies of woven fiberglass and a higher ratio of PTFE content. Their DK and DF value are

3-Layer PCB with RO3006/FR-4 with 0.5oz/1oz Copper & Blind Vias This high-performance 3-layer rigid PCB is meticulously designed to meet the demanding requirements of various advanced electronic applications. With board dimensions of 98mm x 30mm (1 piece), it boasts precise construction details that ensure reliability and functionality. PCB Specification Construction Detail Specification Base material RO3006 + Tg170 FR-4 Layer count 3 layers Board dimensions 98mm x 30mm (1

This 4-layer hybrid Rogers RO3003 high-frequency PCB features a composite stack-up structure that integrates ceramic-filled PTFE RO3003 and TG170 FR-4 dielectrics, perfectly balancing ultra-low microwave loss and robust mechanical stability at a reasonable cost. Fabricated with immersion silver surface finishing and compliant with standardized industrial criteria, this 0.8mm multilayer circuit board adopts an asymmetrical copper configuration with 1oz outer copper and 0.5oz

This rigid 2-layer RF PCB utilizes Rogers RT/duroid 6006, a premium ceramic-PTFE composite engineered for microwave and high-frequency circuitry. Built with Immersion Silver surface finish and manufactured to IPC-Class-2 criteria, this board delivers stable electrical performance and minimal signal loss. Boasting a high dielectric constant for circuit miniaturization, tight dimensional tolerances, and repeatable RF characteristics, it is an ideal solution for patch antennas,

This 2-layer rigid RF PCB is built with Rogers RO4533—a ceramic-filled, glass-reinforced hydrocarbon material—and features an Immersion Gold surface finish. Complying with IPC-Class 2 quality standards, this PCB provides consistent and reliable performance for critical applications such as cellular infrastructure base station antennas and WiMAX antenna networks. With a focus on low loss, dimensional stability, and compatibility with standard manufacturing processes, it stands

This PCB utilizes Rogers RT duroid 5880LZ as its base material and adheres strictly to IPC-Class-2 quality standards. Configured as a 2-layer rigid structure, it is specifically engineered to meet the rigorous performance demands of high-frequency, weight-critical electronic systems. The RT duroid 5880LZ material imparts exceptional dielectric stability, low-loss performance, and lightweight characteristics to the PCB, rendering it highly suitable for mission-critical

Rogers RT/duroid 6035HTC PCB 2-Layer 1.6mm Thick This 2-layer (double-sided) rigid PCB serves high-power RF and microwave applications. By utilizing Rogers RT/duroid 6035HTC, a ceramic-filled PTFE composite, it achieves excellent thermal management and signal integrity. Each construction aspect, from material choice to surface finish, is optimized for high-power operation, guaranteeing reliability in challenging scenarios such as amplifiers and power dividers. Key specificati

This 4-layer printed circuit board (PCB) constructed with RT/duroid 5880 and RO4450F materials. Designed for high-frequency applications, it offers exceptional performance and reliability, making it ideal for advanced telecommunications and radar systems. Material Composition The base materials of this PCB are RT/duroid 5880 and RO4450F: - RT/duroid 5880: A PTFE composite reinforced with glass microfibers, known for its uniform dielectric properties and low loss at high

Introduction In today’s fast-paced electronics industry, the demand for high-performance printed circuit boards (PCBs) has never been greater. Our newly shipped 2-layer PCB, constructed with RT/Duroid 5880, exemplifies cutting-edge technology and precision engineering, tailored for high-frequency applications. PCB Construction Details - Base Material: RT/Duroid 5880 - Layer Count: 2 layers - Dimensions: 60mm x 55mm (± 0.15mm) - Minimum Trace/Space: 4/6 mils - Minimum Hole

Today we are pleased to introduce our latest newly shipped 2-layer Rogers IsoClad 933 PCB. This state-of-the-art product has been specifically engineered to meet the rigorous demands of high-performance applications, making it an ideal choice for industries such as telecommunications, aerospace, and defense. Introduction to Rogers IsoClad 933 Material The foundation of this PCB is built upon Rogers IsoClad 933 laminates, which are non-woven fiberglass/PTFE composites. These

Introducing our newly shipped RF-60TC PCB, a cutting-edge solution provided to meet the demanding requirements of high-frequency applications. With its advanced features and exceptional performance, this PCB is perfect for a wide range of applications, from high power amplifiers to satellite systems. The RF-60TC PCB is constructed using glass reinforced PTFE ceramic composites, offering superior characteristics that ensure reliable and efficient operation. Its dielectric

This PCB is a double-sided rigid type fabricated with Rogers TMM10 thermoset microwave material, which integrates PTFE and ceramic substrate advantages while overcoming their mechanical and manufacturing limitations. Compliant with industrial standards, it features 0.5mm finished thickness, 1 oz outer-layer copper weight, and ENEPIG surface finish, ensuring reliable performance for precision microwave and electronic applications. PCB Details Item Specification Base material