Grinding Magnetic Chuck

Universal permanent magnetic chuck Product Introduction The working principle of the permanent magnet fixture is to use the characteristics of different permanent magnet materials, through the electronic control system on the internal magnetic circuit distribution control and conversion, so that the system internal magnetic field to achieve their own balance, or degaussing state, or release to the fixture Surface, that is, magnetic state. Universal permanent magnetic chuck

XH42 rotary permanent magnetic chuck Applications: 1) Most suitable for heavy duty milling operations on medium, large sized and even rough components. 2)A minimum of a alternate poles contact is necessary for optimum clamping. 3) Minimum thickness of job-15mm 4) Easily integrated with pallet changing and FMS systems ·X11 electronic controlled magnetic chuck is mainly used on surface grinder ·Unique design of coil makes its suction very uniform. Suction ≥ 100 N/cm2 ·High

X11 electro magnetic chuck ·X11 electronic controlled magnetic chuck is mainly used on surface grinder ·Unique design of coil makes its suction very uniform. Suction ≥ 100 N/cm2 ·High rigidity, high precision, small thermal deformation ·X11 is suited to hold work piece that difficult to clamping Application Specification sheet Model Dimensions (MM) Polar Distance (P) Voltage (V) Current (A) Power (W) Net Weight (KG) Overall size (CM) Length Breadth Height X11 150*400 400 150

450mm x21 electromagnetic chuck for grinding machine and spark machine x21 electromagnetic chuck for grinding machine and spark machine Spec sheet of X21 circular electronic controlled magnetic chuck Machining center sucker in the course of the work does not require electricity, rely on permanent magnet suction suction workpieces, to avoid the electromagnetic system in the sudden power failure and damage to the magnetic loss of the workpiece and the risk of falling off the

XZ11 electronic controlled magnetic chuck for grinder Electric permanent magnet fixture can be used for steel materials, cutting, grinding, milling and other processing of the clamping, switching state close to the power button, there is no magnetic field off, the suction will always have magnetic, and magnetic force does not take time Attenuation, even if the power or drag cable damage is not affected, it is known as safety fixture. Product introduction:XZ11 is a a

Universal permanent magnetic chuck Product Introduction Universal permanent magnetic chuck Product introduction: The universal permanent magnet suction cup can be turned 360 degrees or tilted at any angle. It is very convenient and quick to correct the wire cutting steel wire, with high precision and firm clamping. It is an ideal accessory product for wire cutting. parameter: Product Parameters Model Main dimensions (mm) Suction (N/cm2) Net weight (Kg) Package dimensions (cm)

XZ11 electronic controlled magnetic chuck for grinder Product introduction:XZ11 is a a electronic controlled magnetic chuck specially designed for knife grinder, which has uniform suction and accurate positioning, XZ11 is suitable for all kinds of knife grinders, such as wood_x001f_working knife grinder, paper sharpener and so on. Specification sheet Model Dimensions (MM) Polar Distance (P) Voltage (V) Current (A) Power (W) Net Weight (KG) Overall size (CM) Length Breadth

X11 XM11 Dense electronic controlled magnetic chuck Used for normal drilling,milling,and CNC machining center Best used for the workpieces at least 250x250mm and 10mm thick. Used for samll,medium dimensions with normal operating air gaps and thinner workpieces. Product introduction: XM11 Dense electronic controlled magnetic chuck is mainly used to hold small or thin work piece for machining. AS an enhanced ECMC, its dense magnetic flux line makes suction more uniform and

X11 XM11 Dense electronic controlled magnetic chuck Powerful combination of magnetic force from the square-shaped magnetic pole, magnetic pole density distribution, magnetic field strength ,the internal stress in the workpiece can be released at the same time in processing to get high-precision workpiece. Product introduction: XM11 Dense electronic controlled magnetic chuck is mainly used to hold small or thin work piece for machining. AS an enhanced ECMC, its dense magnetic

X11 XM11 Dense electronic controlled magnetic chuck Product introduction: XM11 Dense electronic controlled magnetic chuck is mainly used to hold small or thin work piece for machining. AS an enhanced ECMC, its dense magnetic flux line makes suction more uniform and strong. Suction ≥ 150N/cm2, with high precision,high rigidity and small thermal deformation. Specification sheet Type A Type B Spec sheet: Model Dimensions (MM) Polar Distance (P) Voltage (V) Current (A) Power (W)

XH42 rotary permanent magnetic chuck Attention: 1. The Electromagnetic chuck should be supplied with rated voltage of 110 volts DC power. The rectifier and control device is already equiped in the host electrical equipment if used on grinding machine. If use alone can select sets of rectifying device directly. 2. For the safe operation, before installing and using must be measure insulation resistance between coil and grounding wire,it should not less than 500 MΩ measured by

X11 XM11 Dense electronic controlled magnetic chuck Product introduction: XM11 Dense electronic controlled magnetic chuck is mainly used to hold small or thin work piece for machining. AS an enhanced ECMC, its dense magnetic flux line makes suction more uniform and strong. Suction ≥ 150N/cm2, with high precision,high rigidity and small thermal deformation. Features 1, All metal top plates-hard wearing brass and steel 2, Extra strong magnetic force and less remaining magnetism

x21 electromagnetic chuck for grinding machine and spark machine Spec sheet of X21 circular electronic controlled magnetic chuck Electromagnetic permanent magnet fixture in the suction clamping process, but there is magnetic force on the surface of the fixture, the other surface does not exist magnetic flux leakage phenomenon, not only the tool without any effect, and remove the workpiece, the fixture and the workpiece will not exist remanence , Because the system has an

XM91 dense permanent magnetic chuck It is widely used in lathe, milling machine, boring machine, grinding machine,Mobile phone chuck, turnout processing etc., using the overall processing, the inside without moving parts, with high strength and high rigidity, can meet all kinds of machine stroke and various types parts of high-precision processing, strong and perfect suction, the maximum magnetic force up to 16kgf/cm2. Compared with the traditional clamp, the permanent magnet

XM91 dense permanent magnetic chuck Product introduction: XM91 Dense permanent magnetic chuck is suitable for flat grinding machine, spark machine, cutting machine, etc. The magnetic line is dense, which makes the magnetism uniform, XM91 especially suitable for holding thin and small work piece processing, suction up to 100 N/cm2. Specification sheet Model Dimensions (MM) Polar Distance (P) Magnetism (N/cm2) Net Weight (KG) Length Breadth Height XM91-100*175 175 100 45 1.5+0

X11 electro magnetic chuck ·X11 electronic controlled magnetic chuck is mainly used on surface grinder ·Unique design of coil makes its suction very uniform. Suction ≥ 100 N/cm2 ·High rigidity, high precision, small thermal deformation ·X11 is suited to hold work piece that difficult to clamping Electric permanent magnet fixture can be used for steel materials, cutting, grinding, milling and other processing of the clamping, switching state close to the power button, there is

1000mm x21 electromagnetic chuck for grinding machine and spark machine x21 electromagnetic chuck for grinding machine and spark machine Spec sheet of X21 circular electronic controlled magnetic chuck Application Specification sheet Spec Sheet: Product name Model Technical parameters Table type Net weight (KG) D×H (MM) Voltage (V) Current (A) Power (W) Pole pitch (MM) Circular ECMC X21-250 Φ265×110 110 0.73 86 4+11 Concentric circles 40 X21-320 Φ325×105 110 0.8 86 4+11 65 X21

XM91 dense permanent magnetic chuck Electric permanent magnet fixture can be used for steel materials, cutting, grinding, milling and other processing of the clamping, switching state close to the power button, there is no magnetic field off, the suction will always have magnetic, and magnetic force does not take time Attenuation, even if the power or drag cable damage is not affected, it is known as safety fixture. Product introduction: XM91 Dense permanent magnetic chuck is

XM91 dense permanent magnetic chuck Specification sheet Model Dimensions (MM) Polar Distance (P) Magnetism (N/cm2) Net Weight (KG) Length Breadth Height XM91-100*175 175 100 45 1.5+0.5 ≥100 6 XM91-125*250 250 125 45 1.5+0.5 ≥100 10 XM91-150*150 150 150 45 1.5+0.5 ≥100 7 XM91-150*300 300 150 45 1.5+0.5 ≥100 14 XM91-150*350 350 150 45 1.5+0.5 ≥100 17 XM91-150*400 400 150 45 1.5+0.5 ≥100 21 XM91-150*450 450 150 45 1.5+0.5 ≥100 23 XM91-200*400 400 200 45 1.5+0.5 ≥100 28 XM91-200

XM91 dense permanent magnetic chuck Specification sheet Model Dimensions (MM) Polar Distance (P) Magnetism (N/cm2) Net Weight (KG) Length Breadth Height XM91-100*175 175 100 45 1.5+0.5 ≥100 6 XM91-125*250 250 125 45 1.5+0.5 ≥100 10 XM91-150*150 150 150 45 1.5+0.5 ≥100 7 XM91-150*300 300 150 45 1.5+0.5 ≥100 14 XM91-150*350 350 150 45 1.5+0.5 ≥100 17 XM91-150*400 400 150 45 1.5+0.5 ≥100 21 XM91-150*450 450 150 45 1.5+0.5 ≥100 23 XM91-200*400 400 200 45 1.5+0.5 ≥100 28 XM91-200