Silicone Coated Release Liner

40 Micron Embossed PP Silicone Coated Release Liner Description: What's Silicone Coated Release Liner? Silicone coated release liner refers to the film with separative film on the surface. It does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone, to make it act out the light and stable release force to

Red Color HDPE Release Film Red Color HDPE Silicone Coated Release Liner For Foam Tapes​ Description: Release film refers to the functional film material with low surface energy obtained by coating some special chemical coatings on various films with thermal drying or UV curing. It is an indispensable part of pressure-sensitive adhesive protective film products and also a die-cutting material that must be used in the die-cutting industry. Our Red Color HDPE Release Film Red

Description: Silicone Coated Release Film Silicone Release Film Release Film As a film with silicone coated on one or both sides of films such as PE(HDPE or LDPE), PET, PP MOPP, or other type plastic films or papers. it has an equal peel strength and thickness while having a favourable surface profile, ultimately acting as a temporary support for adhesive part materials and protecting the adhesion layer. It is can be peeled off from the self-adhesive products when used. It is

Description: Siliconized PE Film Silicone Coated PE Film Silicone Coated Release Film As a film with silicone coated on one or both sides of films, such as PE(HDPE or LDPE), PET, PP MOPP, or other type plastic films or papers. It is widely used as a protection film for self-adhesive products, such as foam tape, pressing,stripping, self-adhesive bitumen waterproof membranes, tapes, etc. Parameter: Item Unit Factory parameter Thickness mm 0.03-0.15 Width mm ≤2010 Sleeve I.D. mm

HDPE Liner Silicone Coated Release Liner For Self-adhesive Tapes Release Liner/Film is siliconized on PE, PET, PP or other type plastic films or papers, that enables to possess release effectiveness. It is usually used as the protective film of self-adhesive products, and directly peeled off from the self-adhesive products when used. Product Name HDPE Liner Silicone Coated Release Liner For Self-adhesive Tapes Material HDPE, PP, PET, MOPP, ect. Function (1) High subsequent

HDPE Film Embossed Silicone Coated Release Liner Description: It is made of HDPE (High density polyethylene) and by successive procedure of co-extrusion blown process, silicone oil coating that enables to possess release effectiveness. With adoption of special technique, PE release film is embossed with regular corrugated stripes at machine direction. Parameter: Products Name HDPE film Spec. 0.1mm*920mm Detection Methed Q/TPXP 1-2013 Date 2020.7.2 NO. Item Factory Requirement

Embossing Process HDPE Silicone Coated Release Liner Description: What's the release liner? A release liner is a pleastic release film which made of PE, PP or PET film as carrier, silicon coated on either one or two-sided releases options. The film is uniform coated and very smooth and clean without wrinkles/tears/granules/bubbles/pinholes or other defects. This highly conformable product bonds well to most surfaces over a wide range of temperatures and release film is

Single Sided PET Silicone Coated Release Liner Description: PET release film: It is using PET film as the carrier, one sided or double sided silicon coated.Widely used for waterproof membranes, tapes and butly tapes, ect. It also can be done as non silicon and static-free for electrical industries. Phameter: Item Unit Index Thickness mm 0.012-0.188 Width mm 100-2000 GSM g/㎡ 17-265 Sleeve I.D. mm 76/152 Max. Tensile strength N/50mm ≥150 Elongation @ break % ≥30 Peeling force g

Release Liner Description: What's the release liner? Silicone coated release liner refers to the film with separative film on the surface. It does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone, to make it act out the light and stable release force to different organic pressure glue. According to

Bitumen Application PP UV Curing Type Silicone Coated Release Liner Description: It is PP release film, as PP film carrier and coated one side or two side solvent silicon, use UV curing type, make it easy to peel off from adhesive products when construction. It is high temperature resistance, 130-160 degrees, higher than PE films. It is widely use as release material for self-adhesive waterproofing membranes, butyl tapes and other self-adhesive products. We also can do HDPE,

Description: Silicone coated release liner refers to the plastic film or craft/GLASSINE paper which coated silicon on single or double sides of the surface. HBF Silicone Coated Release Liner is PP plastic film as carrier, silicon coated on one side or both side by UV or Thermal curing type depends on the applications. Material:PP Type:Release Film/Liner Application:Release material for hot-melt gule waterproof membranes

Description: F901 release film: It is a HDPE silicon coated plastic film, used for waterproofing membranes, which has anti-outwearing and non-discoloration to maintain the viscosity of asphalt. Parameter: Item Unit Index Thickness mm 0.04-0.07 Width mm 900-1200 GSM g/㎡ 39-69 Sleeve I.D. mm 76/152 Max. Tensile strength N/50mm ≥30 Elongation @ break % ≥150 Peeling force g/inch ≤10 Subsequent adhesion rate % ≥90 Advantages: A,The

Self-adhesive Waterproofing Application Plain PP Silicone Coated Release Liner Description: Silicone coated release liner refers to the plastic film or craft/GLASSINE paper which coated silicon on single or double sides of the surface. Plain PP Silicone Coated Release Liner uses Polypropylene (PP) plastic film as the carrier, make it high strength than release paper, and high temperature resistance than HDPE plastic film, can do 150-180℃, no puckering, yellowing etc, make it

UV Curing Type CPP Silicone Coated Release Liner For Self-adhesive Products Description: Silicone coated release liner refers to the film with separative film on the surface. Silicone coated on either one sided or two sided. It will be peeled off when use the self-adhesive products, such as bitumen waterproof membranes, PVC floor, butyl tapes and other products. PP UV Silicone Coated Release Liner For Self-adhesive Membrane which used plastic Polypropylene (PP) film as the

Barrier Type F901 Silicone Coated Release Liner Description: F901 release film: It is a HDPE release film, used for waterproofing membranes, which has anti-outwearing and non-discoloration to maintain the viscosity of asphalt. Parameter: Item Unit Index Thickness mm 0.04-0.07 Width mm 900-1200 GSM g/㎡ 39-69 Sleeve I.D. mm 76/152 Max. Tensile strength N/50mm ≥30 Elongation @ break % ≥150 Peeling force g/inch ≤10 Subsequent adhesion rate % ≥90 Advantages: A,The production

Bitumen Membranes Application Plain F901 Silicone Coated Release Liner Description: Silicone coated release liner refers to the plastic film or craft/GLASSINE paper which coated silicon on single or double sides of the surface. As per different glue or products, need to do different peeling force to meet the requierements. So we have UV type silicon curing and thermal type curing according to customers' requirements. Material:HDPE Type:Release Material/Release Film/Release

HDPE Silicone Coated Release Liner Description: What's the release liner? A release liner is a plastic release film which made of PE, PP or PET film as carrier, silicon coated on either one or two-sided releases options. The film is uniform coated and very smooth and clean without wrinkles/tears/granules/bubbles/pinholes or other defects. This highly conformable product bonds well to most surfaces over a wide range of temperatures and release film is heavily used in consumer

Single Silicone Coated PET Release Liner Description: PET release film is also called PET silicone oil film. A layer of silicone oil is applied on the surface of the PET film to reduce the adhesion of the PET film surface and achieve the release effect. Can be divided into single-sided release film and double-sided release film. According to the release force, it can be divided into a light release film, a medium release film, and a heavy release film. Our company is equipped

Product introduction: It is made of HDPE (High Density Polyethylene) and by successive procedure of co-extrusion blown film process, silicone oil coating that enables to possess release effectiveness. Application and characteristics: Good appearance & the convenience to peel off Anti-chemosmosis Temperature-resistance up to 130℃ Performance index: Item Unit Factory parameter Thickness mm 0.03-0.07 Width mm 900-1200 Sleeve I.D. mm 76 Max. Tensile strength N/50mm ≥30 Elongation

High Subsequent Adhesion UV PP Silicone Coated Release Liner Description: Silicone coated release liner refers to the film with separative film on the surface. Use Polypropylene (PP) film as the carrier, make it high temperature resistance than PE. It does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone,