10G SFP+ Fiber Transceiver

10G SFP+ LC SR 850nm 300m Transceiver HP Compatible JD092B Product Features ● Supports up to 11.3Gb/s bit rates ● 100% HP Compatible ● SFP+ Transceiver Module ● Multimode Fiber (MMF) ● Up to 300m Reach ● 850nm Wavelength ● Duplex LC Connector ● Digital Diagnostics (DDM) Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V) Parameter Symbol Min. Typ Max. Unit Note

Olinkcom 10GBASE-SR SFP+ 850nm 300m Transceiver Juniper Compatible EX-SFP-10GE-SR Product Features ● Supports up to 11.3Gb/s bit rates ● 850nm VCSEL transmitter ● PIN Receiver ● Duplex LC connector ● Up to 300m on 50/125um MMF(2000MHZ.KM) ● < 1W Power Dissipation ● Digital Diagnostic Monitor Interface ● Operating case temperature: Commerical:0~70°C, Industrial:-40 to 85 °C Optical Characteristics (TOP(C) =0

Product Features ● Supports 9.95 to 11.5Gb/s bit rates ● Duplex LC connector ●Hot pluggable SFP+ footprint ● Uncooled 1270nm~1610nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical interface compliant to SFF-8431 ● Operating case temperature: Commerical

10GBASE-SR SFP+ 850nm 300m Transceiver Huawei Compatible OMXD30000 10GBASE-SR supports up to 300m over OM3 MMF via an LC duplex connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of HW switches, routers, servers, network interface card (NICs) etc. Featuring low power

Cisco SFP-10G-SR-C Compatible, 10GBASE-SR SFP+ 850nm 300m DOM LC MMF Transceiver Module Product Descriptions Olinkcom's OLSP851XL-C(I)DS3 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over Multi Mode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high performance and cost

MSA Compliant 10GBase-ZR SFP+ Transceiver (SMF, 1550nm, 100km, LC, DOM) Physical Specification Product Shipping Dimension(HxWxD) 1.2 in. x 2.75 in. x 4.75 in. Product Shipping Weight(LB) 0.4 Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Note Supply Voltage Vcc -0.5 4.0 V Storage Temperature TS -40 85 °C Relative Humidity RH 0 85 % Note: Stress in excess of the maximum absolute ratings can cause

Huawei Compatible 10GBase-ER SFP+ Transceiver (SMF, 1550nm, 40km, DOM, LC) 10GBase-ER optical transceivers are Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER/EW; support 4x, 8x, and 10x Fibre Channel, over 40km links. Product Features • Hot-pluggable SFP+ footprint •

10G-LR SFP+ 1310nm 10km DOM LC SMF Module Arista Networks SFP-10G-LR Compatible Descriptions Arista Networks SFP-10G-LR compatible SFP+ transceiver supports up to 10km link lengths over LC duplex SMF fiber. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication. Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Note

10G HPE Aruba Compatible SFP+ LR 1310nm 10km DOM LC SMF Fiber Transceiver Module Descriptions The OLSP311XL-CD10 compatible HPE Aruba Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over SingleMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. Featuring low power consumption, high speed, this 10G SFP+

​ 10GBASE-LR SFP+ 1310nm 10km DOM LC SMF Customized Transceiver Module Product Descriptions This Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over SingleMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the

Netgear SFP+10G-BXU Compatible BiDi 1270nm-TX/1330nm-RX 10km DOM LC SMF Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Simplex LC Connector ● Hot pluggable SFP+ footprint ● Uncooled 1270nm DFB transmitter, 1330nm PIN photo-detector ● Uncooled 1330nm DFB transmitter, 1270nm PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1.3W ● Digital Diagnostic Monitor

10G-SR SFP+ 850nm 300m DOM LC MMF Juniper Transceiver Module Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V) Parameter Symbol Min. Typ Max. Unit Note Transmitter Operating Wavelength λ 810 850 880 nm Ave. output power (Enabled) PAVE -6 0 dBm 1 Extinction Ratio ER 3.5 dB RMS spectral width Δλ 0.85 nm Rise/Fall time (20%~80%) Tr/Tf 50 ps 2 Dispersion penalty TDP 2 dB

Planet MTB-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver ● LC Fiber Optic Connector Type ● 100% Guaranteed Compatibility ● Part number and unique product serialization ● Eliminates any network communication conflicts and provides easy identification ● Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Note Supply

Product Descriptions This fiber optic transceiver are designed for use in 10-Gigabit Ethernet links up to 40km over G.652 SingleMode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication and datacom. Optical Characteristics (TOP(C) = 0 to

Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1270nm~1370nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1.2W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical interface compliant to SFF-8431 ● Operating case

Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1270nm~1330nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1.2W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical interface compliant to SFF-8431 ● Operating case

H3C Compatible 10GBASE-ZR SFP+ 1550nm 80km DOM LC SMF Optical Transceivers Product Features ● Supports 9.95 to 11.3Gb/s bit rates with Dual CDR ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Cooled 1550nm EML transmitter, APD receiver ● Applicable for 80km SMF connection ● Low power consumption, < 1.5W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-ZR ● Electrical interface compliant to SFF-8431,SFF-8432 ● Operating case

Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1550nm DFB transmitter, PIN photo-detector ● Applicable for 40km SMF connection ● Low power consumption, < 1.3W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-ER ● Electrical interface compliant to SFF-8431,SFF-8432 ● Operating case

10G SFP+ 1310nm 40km Descriptions The OLSP311XL-CD40 Transceiver Module is designed for use in 10GBASE Ethernet throughput up to 40km over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication and datacom. Optical Characteristics (TOP(C) = 0

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V) Parameter Symbol Min. Typ Max. Unit Note Transmitter Operating Wavelength λ 1530 1570 nm Ave. output power (Enabled) PAVE -2 4 dBm 1 Side-Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 4 dB RMS spectral width Δλ 1 nm Dispersion penalty TDP 4 dB Relative Intensity Noise RIN -128 dB/Hz Output Optical