Nickel Alloy Steel

UNS N05500 Monel K-500, Alloy K500 Corrosion Resistant Round Bar For Piping And Marine Fixture overview Monel K500 Round Bar is designated as UNS N05500 and Werkstoff Number 2.4375. Alloy K500 Round Bar are known as Monel K-500 Round Bar, Monel Alloy K500 Round Bar & Nickel Alloy K500 Round Bar. Alloy K500 Round Bar, Monel K500 Flat Bar and Monel K500 Hex Bar has a greater tendency toward stress-corrosion cracking in some environments than Monel 400 bar. The corrosion

Inconel 800 / Alloy 800/ 800H N08811 Hot Rolled Heat Resistant Nickel Alloy In Sheet Plate overview Alloy 800 is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. Alloy 800 is extremely resistant to corrosion, even in acidic environment. For high temperature applications

Inconel 601 - Sheet, Plate, Bar AMS 5715, AMS 5870, ASTM B166, ASTM B167, ASTM B168 UNS N06601 overview Inconel 601 is a nickel-chromium alloy, that is highly resistant to oxidation through 2200°F. 601 alloy develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling. The alloy has good high temperature strength, and retains its ductility after long service exposure. 601 alloy has good hot corrosion resistance under oxidizing conditions.

Astm B670 Cold Rolled Inconel Alloy 718 Super Alloy Sheet Plate For Chemical Processing overview Inconel Alloy 600 is a solid solution strengthened alloy used for corrosion and high temperature resistance up to 2000 Degrees F. It is also nonmagnetic, possessing an excellent combination of high strength, both hot and cold workability and resistance to ordinary forms of corrosion. A600 also shows high levels of resistance to stress-corrosion cracking, atmospheric corrosion,

AMS 5962 Alloy 718 CR Cold Drawn Reduced Nickel alloy Inconel 718 round Bar overview Alloy 718 cold reduced nickel bar is a precipitation hardening nickel-chromium alloy containing significant amounts of columbium, aluminum, molybdenum and titanium. The alloy is cold worked after solution annealing and is typically used for high strength fasteners requiring a room temperature minimum tensile strength of 220 ksi after precipitation hardening. It is typically used at temperatur

Astm B670 Cold Rolled Inconel Alloy 718 Super Alloy Sheet Plate For Chemical Processing overview Description: Inconel 718 is a precipitation hardenable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300 Degrees F. The sluggish age-hardening response of Inconel 718 permits annealing and welding without spontaneous hardening during heating and cooling. Inconel 718 has excellent weldability when

High Yield steel steel plate EN S690 FINE GRAIN STRUCTURAL STEEL PLATE Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized

Hastolly C276 Thickness 0.15mm length and width customized Steel plate AB hot sale The C276 alloy has been widely used in the field of chemical and petrochemicals, such as components and catalytic systems that are exposed to chloride organic matter. This material is particularly suitable for use in high temperatures, mixed impurities, inorganic acids (such as formic acid and acetic acid), and seawater corrosion environments. Produc Forms : Sheet, plate , Coil , Strip .wire ,

Hastolly Cold Rolled Round Bar 120mm C2000 N06200 Hastelloy C-2000 Hardware Stamping Substitious Metal Materials Now there is a certain corrosion resistance during use, such as copper metals that can maintain a certain property when the copper metal encounters corrosive substances, but in the same environment, Tetani-based alloy The corrosion resistance is much higher than the copper metal, and when the gas is encountered with a strong corrosive, the alloy material can still

Hot sale cold Rolled Pipe Round Brushed Hastolly C22 N06022 size customize Hastelloy C22 (NO6022) Harbide alloy is a nickel-based high temperature alloy composed of nickel, molybdenum, cobalt, tungsten, and a nickel content of about 60%. It is a completely-capacity nickel-chromium-molybdenum tungsten alloy that has better overall corrosion resistance than other existing nickel-chromium molybdenum alloys, including Hastelloy C-276.C4 alloys and 625 alloys. Hastelloy C22 alloys

Incoloy800 Uns N08800 Nickel alloy tube Nickel alloy coil tube for high temperature The INCOLOY800 high temperature alloy is a Ni-Fe-CR series iron-nickel-based corrosion resistor with Ni and Cr as the main components. Incoloy800 is in a austenite single area from high temperatures, and therefore, the use state is a single austenite tissue. The alloy has a higher chromium content and sufficient nickel content, so there is a high high temperature resistance corrosion

Monel 400 Strip ASTM B127 UNS N04400 With Good Corrosion Thickness 0.2mm width customize Moner 400 (UNS N04400, NCU 30) Montel 400 alloy tissue is a high-intensity single-phase solid solution, which is a corrosion resistant alloy in which is the largest, the most useful use, excellent overall performance. This alloy has high quality corrosion resistance in hydrofluoric acid and fluorine gas medium, which also has excellent corrosion resistance to the thermosputant solution.

UNS N08800 Heat Resistant Super Alloy INCOLOY Alloy 800 INCOLOY nickel-iron-chromium alloy 800 was introduced to the market in the 1950s to fill the need for a heat- and corrosion-resistant alloy with a relatively low nickel content since nickel was, at the time, designated a “strategic” metal. Over the past forty years it has been widely used for its strength at high temperatures and its ability to resist oxidation, carburization, and other types of high-temperature

ALLOY 188 Haynes 188 Equivalent ,Cobalt Alloy , Ams 5608 UNS R30188 Overview Alloy 188 (UNS R30188) is a cobalt-base alloy with excellent high-temperature strength and good oxidation resistance to 2000°F (1093°C). The high chromium level coupled with small additions of lanthanum produce an extremely tenacious and protective scale. The alloy also has good sulfidation resistance and excellent metallurgical stability as displayed by its good ductility after prolonged exposure to

Monel® K-500 Alloys Directory Overview This Nickel-Copper alloy is precipitation hardenable, due to the additions of Aluminium and Titanium. It combines the corrosion resistance of Monel 400 but gives the added advantage of extra strength and hardness (as a result of its age hardening ability).Monel® K-500 is also known as Nicorros Al. The attributes of Monel K500 alloys include: Virtually nonmagnetic, even at quite low temperatures Exceptionally good dimensional stability

Monel®400 Alloys Directory Overview MONEL® nickel-copper alloy 400 (UNS N04400/ W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The attributes of Monel 400 alloys include: Alloy 400 (UNS designation N04400) is a nickel-copper solid solution alloy with high strength over a wide temperature range. It can only be

Alloy C22 N06022 overview Hastelloy C-22 Alloy 22 (UNS N06022; W. Nr. 2.4602; NiCr21Mo14W) is a fully austenitic advanced corrosion-resistant alloy that offers resistance to both aqueous corrosion and attack at elevated temperatures. This alloy provides exceptional resistance to general corrosion, pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. Alloy 22 has found numerous applications in the chemical/petrochemical processing, pollution control

Alloy C2000 N06200 overview HASTELLOY® C-2000® alloy (UNS N06200) is unique among the versatile nickel-chromium-molybdenum materials in having a deliberate copper addition. This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen. Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile, Rod Alloy

Alloy B2 N10665 overview Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids. Hastelloy B2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media. Premature failure may occur if alloy B2 is used where iron or copper is present

Hastelloy® B-3 N010675 overview Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2. In addition, this nickel steel alloy has great resistance to knife-line and heat–affected zone attack. Alloy B-3 also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media. Furthermore, this nickel alloy has excellent resistance to