AMS 5962 Cold Drawn Round Bar Inconel 718 CR for Aerospace
AMS 5962 Alloy 718 CR Cold Drawn Reduced Nickel alloy Inconel 718 round Bar overview
Alloy 718 cold reduced nickel bar is a precipitation hardening nickel-chromium alloy containing significant amounts of columbium, aluminum, molybdenum and titanium. The alloy is cold worked after solution annealing and is typically used for high strength fasteners requiring a room temperature minimum tensile strength of 220 ksi after precipitation hardening. It is typically used at temperatures up to 900° F. This grade has oxidation resistance up to 1800° F. Alloy 718 cold reduced nickel is multiple melted usually with either a vacuum induction melt (VIM) followed by a vacuum arc remelt (VAR), or a vacuum induction melt (VIM) followed by an electroslag remelt (ESR).
AMS 5962 Alloy 718 CR Cold Drawn Reduced Nickel alloy Inconel 718 round Bar Specification and Description
Inconel 718 Round Bar Specification
Inconel Alloy 718 AMS-5662 | AMS 5663
- AMS 5662; Capable Of AMS 5663
- B50TF15 Class A & D; Capable Of Class B/C/E/F
- GE S-400; GE S-1000
- PWA-S-5662; Capable of PWA-S-5663
- P&W MCL F-14; MCL F-17; PWA 300
- ASTM-B637; ASME-SB637
- Mat.-No. 2.4668 UNS N07718, partially DMD 424
| Grade | Inconel 718 – UNS N07718 |
|---|---|
| Specification | ASTM B637 UNS N07718, ASTM B 637 / ASME SB 637, AMS 5662, AMS 5663, AMS 5664, PWA 1009 PWA 1010 GE B50TF15 |
| Inconel 718 Round bar size | Diameter: 3mm~800mm |
| Inconel 718 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Inconel 718 Square bar size | 4mm*4mm~100mm*100mm |
| Inconel 718 Flat bar size | Thickness: 2mm~100mm |
| Width: 10mm~500mm | |
| Inconel 718 Hex Bar size | 2mm~100mm |
| Inconel 718 Billet Size | 1/2" to 495mm Diameter |
| Inconel 718 Rectangles Size | 33mm x 30mm to 295mm x 1066mm |
| Finish | Bright, Polish, Bright, Rough Turned, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Condition | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar |
| Technique | Inconel 718 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod |
| Inconel 718 Bar Type | Drawn Bar, Rolled Bar, Forged Bar, GFM Forged Bar, Open Die Bar, Forged Stepped Shafts, Forged Flat Bar, Forged Square Bar |
| Form | Round, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks, Billet, Ingot, I/H Bar, Angle, Channel Bar, Profiles, Forging Etc. |
| Our Inconel 718 Round Bar conforms to NACE MR0175/ISO 15156 | |
With regards to Inconel 718 round bar hardness & weight, the weight of Inconel 718 round Bar tend to be different, based on the need for these Inconel 718 round Bar. Inconel 718 round bar hardness is Rc 36. The Density of Inconel 718 is 0.296 lb/in³ (8.19 g/cc). The Yield Tensile Strength of Inconel 718 is 160000 psi (1100 MPa). The Ultimate Tensile Strength of Inconel 718 is 160000 psi (1100 MPa).
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8” – 3.00” | h8-h9-h10-h11, ASTM B637 |
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6” – 2.50” | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50” – 6.00” | h11, ASTMA-484 h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00” | h9-h10-h11, ASTM B637 |
AMS 5962 Alloy 718 CR Cold Drawn Reduced Nickel alloy Inconel 718 round Bar Application
- Chemical processing
- Aerospace
- Liquid fuel rocket motor components
- Pollution-control equipment
- Nuclear reactors
- Cryogenic storage tanks
- Valves, fasteners, springs, mandrels, tubing hangers
- Well head completion equipment and blow out preventers (BOP’s)
- Gas turbine engine parts
Nickel alloy sheet / plate , Super alloy sheet / plate Package
General Q and A Questions
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free. Freight charge collect
Q: What information should i provide to source for the right products?
A: Material grade, width, thickness, coating and Purchase quantity, Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed. We provide All Original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.