Copolymer Coated Aluminium Tape

Thickness 0.25mm Copolymer Laminated Aluminum Tape For Fibre Cable And Electric Cable Armouring, Shielding We are the leading manufacturer for cable material, mainly is copolymer aluminum tape, copolymer steel tape, copolymer copper tape for cable manufacturer, advanced quality with reasonable cost, please do not hesitate to contact with us. Double Side Copolymer Coated Aluminum Tape , which also named as copolymer laminated aluminum tape, aluminum copolymer lamination tape,

Thickness 0.25mm Copolymer Laminated Aluminum Tape For Fibre Cable And Electric Cable Armouring, Shielding We are the leading manufacturer for cable material, mainly is copolymer aluminum tape, copolymer steel tape, copolymer copper tape for cable manufacturer, advanced quality with reasonable cost, please do not hesitate to contact with us. Double Side Copolymer Coated Aluminum Tape , which also named as copolymer laminated aluminum tape, aluminum copolymer lamination tape,

Aluminum Laminated tapes double side coated PE 255 x 0.30mm Aluminum tape - Double side coated specified by this standard is mainly used used as a protection against water penetration in the radial direction for high voltage cables and applied longitudinally directly before the outer sheath. It is known also by other name (Aluminum Laminated Tape). Aluminum tape 0.2 mm thickness both side PEAC coated, softness quality, purity 99.0% AL. Technical data sheet ITEM UNIT INDEX

Aluminum Laminated tapes double side coated PE 250 x 0.25mm Aluminum tape - Double side coated should be of uniform quality and supplied in form of coils in one continuous length without any kind of joints. Tapes should be clean, smooth and free from any sharp edges or any defects. Technical data sheet ITEM UNIT INDEX TOLERANCE Length m 1000-6000 +/-50 Width m 12-810 +/-0.5 Thickness steel mm 0.10-0.15 +/-0.010 Co-polymer(EAA) mm 0.058 +/-0.013 Total thickness mm 0.20-0.25 +/

Copolymer coated Alu tapes double side coated PE The tape must be purchased by length in multiples of cable standard length (to be revised with the planning department at each order, but outer diameter should not exceed 900 mm). Coils will be delivered in wooden boxes strong enough such that no kind of damage can occur during transportation, handling and storage. Technical data sheet ITEM UNIT INDEX TOLERANCE Length m 1000-6000 +/-50 Width m 12-810 +/-0.5 Thickness steel mm 0

Copolymer coated Alu tapes double side coated PE for communication cables The copolymer coated alu tapes should be stored in a clean, dry and ventilated warehouse, away from heat sources and sunlight, and the storage temperature should not exceed 50℃. Technical data sheet ITEM UNIT INDEX TOLERANCE Length m 1000-6000 +/-50 Width m 12-810 +/-0.5 Thickness steel mm 0.10-0.15 +/-0.010 Co-polymer(EAA) mm 0.058 +/-0.013 Total thickness mm 0.20-0.25 +/-0.015 Chromium on Steel G/M2 0

Copolymer coated Alu tapes one side coated PE for Optical cables 1. The type of aluminum-plastic composite belt is ELE, and the color is natural; 2, the core is steel core or plastic core, φ75, φ150; 3. Wooden pallet packaging, steel belt fastening packaging, plastic film moisture-proof. Technical data sheet ITEM UNIT INDEX TOLERANCE Length m 1000-6000 +/-50 Width m 12-810 +/-0.5 Thickness steel mm 0.10-0.15 +/-0.010 Co-polymer(EAA) mm 0.058 +/-0.013 Total thickness mm 0.20-0

Alu coated tapes one side coated PE for communication cables 1,formula technique of plastic film . Our company owned experts with decades years experience in formula analysis, who guarantee stong and stable bonding performance between plastic coating and metal , also with the sheathing material . 2,slitting technique : in slitting , we strive to invent slitting machine , which can produce slited tape smoothly and flatness no matter how long it is , and no corrugated edge , no

Co-Polymer Laminated Aluminum Tape With Master Coil Jumbo Roll Advantage: 1.High strength of aluminum polyester tape. 2.New and good quality basic materials. 3.RoHS and SGS standard. Aluminum ployester tape is mainly used on coaxial cables, signal cables, control cables, instrumentation cables, LAN cables, data communication cables, and most of the other communication cables. Technical data sheet ITEM UNIT INDEX TOLERANCE Length m 1000-6000 +/-50 Width m 12-810 +/-0.5

Aluminum-plastic composite tape Single-sided aluminum foil Double-sided aluminum foil 0.032mm Origin Jiangsu Import No Custom processing yes Brand Zhongxin totall thickness 0.032+/-0.03(mm) color sliver Temperature resistance 150(°C) Scope of application Wire and Cable certified SGS Series Aluminum-plastic composite belt single/double double sided release paper No with/without glue without material AL+PET+AL length 1000-10000m Thickness 0.032+/-0.03 width 5-1500mm use signal

Copolymer coated Alu tapes double side coated PE for communication cables The copolymer coated alu tapes should be stored in a clean, dry and ventilated warehouse, away from heat sources and sunlight, and the storage temperature should not exceed 50℃. Technical data sheet ITEM UNIT INDEX TOLERANCE Length m 1000-6000 +/-50 Width m 12-810 +/-0.5 Thickness steel mm 0.10-0.15 +/-0.010 Co-polymer(EAA) mm 0.058 +/-0.013 Total thickness mm 0.20-0.25 +/-0.015 Chromium on Steel G/M2 0

Aluminum-plastic tape double-sided aluminum foil 0.32mm The aluminum strip used for the aluminum plastic composite belt should comply with the provisions of GB/ t3198-2003. The grade is 1070A, 1060,1050, and the state is.Other grades of aluminum belts can also be used under the premise of satisfying the performance of composite belts.The nominal thickness of the aluminum strip is 0.10mm, 0.15mm, 0.20mm, and the tolerance of the aluminum strip thickness shall be +8% of the

Laminated Metal Plastic Strip for communical cable The plastic layer of EL or ELE type aluminum-plastic composite belt is usually made of ethylene monoacrylate copolymer (EAA) ethylene methacrylate copolymer (EMAA) and so on. The plastic layer of YL or YLY type aluminum-plastic composite belt is made of low density polyethylene resin. The low density polyethylene resin should comply with the provisions of GB/T11115, and it is appropriate to use superior grade heavy film

Alu laminated metal plastic strip for optical fiber cable and communical cable (1) Aluminum plastic composite belt should be continuous and tight composite, its surface should be smooth, smooth, uniform, no impurities, no wrinkles, no spots, and no other mechanical damage. (2) the aluminum plastic composite belt should be tightly wound, and the belt should not be broken when used vertically. (3) The side edge of the uncut aluminum plastic composite belt is allowed to have 2

laminated metal plastic composite strip for communical cable 0.1-0.2mm The plastic coated aluminum tape is a metal composite tape made of calendering aluminum tape with good ductility as base material, and laminated with single-sided or double-sided composite polyethylene(PE) plastic layer or copolymer plastic layer. Using the method of longitudinal wrapping, plastic coated aluminum tape can form a composite sheath of the cable or optical cable with the outside extruded

0.25mm Alu plastic composite tape For Fibre Cable Shielding The aluminum-plastic composite tape should be tightly wound on the steel or equivalent pipe core, the inner diameter of the pipe core should be 100mm+/-2mm, 150mm+/-2mm, 204mm+/-mm, 406mm+/-mm.The tube core length of the slitted aluminum plastic composite tape should be the same as the width of the aluminum plastic composite tape. The tube core protruding from the end face of the composite tape should be less than

0.25mm Alu ELE composite tape For Fibre Cable Shielding No more than two joints are allowed in the same disc (reel), but butt welding joints are allowed, one joint is allowed if the length is less than 1.4km, and two joints are allowed if the length is 1.4km or more.The thickness of the joint should not exceed 15 times of the original thickness, the plastic layer of the joint should be restored, the joint should be marked, and the distance between the two joints should not be

0.25mm Alu EL single side composite tape For Fibre Cable Shielding No more than two joints are allowed in the same disc (reel), but butt welding joints are allowed, one joint is allowed if the length is less than 1.4km, and two joints are allowed if the length is 1.4km or more.The thickness of the joint should not exceed 15 times of the original thickness, the plastic layer of the joint should be restored, the joint should be marked, and the distance between the two joints

Alu ELE 0.28mm composite tape For Optical Fibre Cable The aluminum-plastic composite tape, packing box, and moisture-proof measures must comply with the provisions in article 11 to 17 of GB/T3199. The maximum length and width of the packing box are 1150mm and 800mm, respectively.The aluminum plastic composite belt is generally cut flat, can also be placed vertically, between each plate are separated by cardboard or foam materials, core tube application of paper tube plastic

Laminated metal Plastic tape For Optical Fibre Cable copolymer coated steel tape 0.2 mm According to the customer's order, the sales department will send the order to the production operation department according to the inventory situation and the production capacity of the workshop.According to the product structure and production process, the production operation department shall calculate the material quota and form the production plan.The QUALITY DEPARTMENT is responsible