Solid Steel Round Bar

Product Annual output of 1.1 million tons of steel including 800 thousand tons of continuous casting round bloom and 200 thousand tons of heavy ingot, and annual output of 750 thousand tons of hot rolled products. Products, mainly including: railway wheel and tyre steel, bearing steel, spring steel, gear steel, tool and die steel, alloy tube billet, high quality ring steel, high grade cold heading steel, non-quenched and tempered steel, anchor chain steel, roller steel, steel

Tool Steel Bar 40Cr Alloy Steel Round Bar Product information: OD:10mm-1000mm Length:As customer request Grade:ASTM 1020/ ASTM 1035/ ASTM 1045/ ASTM 1050/ ASTM 1053/ ASTM 1566/ ASTM 5120/ ASTM 5140/ ASTM 4135/ ASTM 4142/ ASTM 1340/ ASTM 1541/ ASTM 1547/ ASTM 1022/ ASTM 1026/ ASTM 52100/ ASTM 4130 …… DIN EN 1.0402/ DIN EN 1.0411/ DIN EN 1.0501/ DIN EN 1.0503/ DIN EN 1.0540/ DIN EN 1.7016/ DIN EN 1.7035/ DIN EN 1.7220/ DIN EN 1.7225/ DIN EN 1.5538/ DIN EN 1.0415/ DIN EN 1.7218/

Martensitic grades 12Cr13 ( 1Cr13 ), 20Cr13 ( 2Cr13 ), 30Cr13 ( 3Cr13 ) and 40Cr13 ( 4Cr13 ) hardenable stainless steels used for its basic corrosion resistance, high strength and wear resistance. Typical applications include: Cutlery blades, solids handling, surgical instruments, plastic moulding, drive shafts, bearings, gears, springs, conveying equipment, cargo handling, tools, seaweed driers. Grade AISI C

Q195 is a carbon structural steel with a yield strength of 195 MPa, with high plasticity, toughness and welding properties, good pressure machining performance, but low strength. It is mainly used in the manufacture of anchor bolts, ploughshares, chimneys, roof panels, rivets, low-carbon steel wires, thin plates, welded pipes, pull rods, hooks, brackets, welding structures, etc. Carbon structural steel can be divided into two

s45c steel is a medium tensile low hardenability and medium carbon steel supplied in the hot rolled, cold drawn, forged and turned or polished condition 1): s45c Steel Equivalent Materials or Steel Grades in different standard GB DIN ASTM TOCT JIS 45# C45 / CK45 AISI 1045 / SAE 1045 / ASTM 1045 45CT S45C / SM45C 2): s45c steel material according to Chinese standard with Chrome content: 0.30-0.40 or Titanium: 0.05

Products High speed steel round bar Grade M24/1.3247/SKH59 Standard GB standard,ASTM standard Wire Gauge Th 3-120mm x W 3-300mm. Dia tolerance Dia 3mm-300mm. Process Hot rolled Delivery time around 20 days Payment terms L/C,D/A,D/P,T/T, Supply ablitity 10000 Metric Ton/Metric Tons per Month MOQ 20 Metric Tons Application M42 High speed steel round bar can be used in conditions where the demand for hot hardness is important.

A350LF2 is a material in the American standard, that is, low-alloy steel forgings. The main chemical components of A350 are: C: max0.30, Mn: 0.60–1.35, P: max0.035, S: max0.040, Si: 0.15–0.30, Ni: 0.40max, Cr: 0.30max, Mo: 0.12m axB, Cu: 0.40max, Co: 0.02max, V: 0.08max. The mechanical properties of A350Lf2 are: tensile strength: 485-655MPa, yield strength: 250MPa, section shrinkage: 30%, hardness: less than 197HB. The substitute material of

Hardness: HB - 270. Heat treatment: Most steel hardening treatments involve heating the steel to a set temperature and then rapidly cooling it by immersing it in oil or water. EN8 and EN353 steels are readily available and inexpensive materials suitable for heavy-duty applications. Hardening: Hardening °C 780-820. Tempering: EN353 is reheated to 780C -- 820°C, held until the entire section is uniform in temperature, and then quenched in oil,

Stainless steel tape/strip/band usually classify as following :304 304L 303 302 301 430 201 202 316 316L stainless steel tape/strip/band,among which there is a much higher content of nickel and chromium in 309 310 314 than than others, so as to improve high temperature oxidation resistance and creep strength of steel, while 310s stainless steel strip which has lower carbon content than 310, is variants of