Hex Flange Nuts

hot dip galvanized HDG M24 heavy hex flange nut Flange nuts are hex nuts with a bottom circular flange that is larger than their top hex section. There are two types commonly available: flange lock nuts, which are prevailing torque type lock nuts, and serrated flange nuts, which are free spinning but have a serrated bearing surface to grip the mating surface. Standard: DIN6923.IFI145 Size: 1/4”-3”, M5-M64 Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass Grade: SAE

DIN 6926 WITH POLYAMID INSERT Galvanized M6 nylon lock hex flange nut Nut with a wide flange Acts as a washer Less likely to loosen Serrated for extra grip Substitute for a lock nut Known as a serrated flange nut, serrated hex flange nut, flange lock nut, or serrated hex flange lock nut Will scratch the surface it attaches to Standard: DIN6926 Size: 1/4”-3”, M5-M64 Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass Grade: SAE J995 Gr.2,5,8; CL4, 5, 6, 8, 10, 12

ISO 4161 serrated m14 galvanized grade 4 hex flange nut Hex Flange Nuts are hex nuts with a wide flanged portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. The flange acts as a washer, which allows the nut to fasten evenly to the installation material's surface. Standard: DIN6923.IFI145 Size: 1/4”-3”, M5-M64 Material: Carbon

ANSI B18.2.4.4M serrated m16 galvanized grade 4 hex flange nut Hex flange nuts are very common and used widely in softer installation materials. These nuts come with either a serrated or non-serrated flange. The non-serrated flange gives some of the benefits of a standard flat washer. The serrated version of a flange nut comes with serrations on the flange's bottom to create a locking effect. The serrations bite into the material installed, making the nut less likely to

A4-70 SUS316 M10 stainless steel hex flange nuts The flange may be serrated to provide a locking action. On a serrated flange nut, the serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations they cannot be used with a washer or on surfaces that must not be scratched. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of the nut.

DIN6923 serrated black finish M14 grade 8 hex flange nut Hex Flange Nuts are a very common type of nut with a great variety of applications. The Hex Flange Nuts are similar to the Hex Nuts but with a washer connected to it at the end. Standard: DIN6923.IFI145 Size: 1/4”-3”, M5-M64 Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass Grade: SAE J995 Gr.2,5,8; CL4, 5, 6, 8, 10, 12 Thread: M, UNC, UNF,BSW Finish: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide,

SAE J995 Gr,8 non serrated IFI-145 YELLOW ZINC PLATED fine thread hexagon flange nut Flange nuts are available both non-serrated and serrated to provide locking action. The serrations on Serrated Flange Nuts displace material on the mating surface when the nut is wrenched into place, forming a connection which resists loosening. Because of the serrations, serrated flange nuts cannot be used with washers or on surfaces that should not be scratched. Standard: DIN6923.IFI145

DIN6923 Serrated Grade 8 zinc plated Hex Flange Nuts Flanged Nut is specially designed for flanges with a flat inbuilt washer attached to its neck. The flat surface of the washer around its neck come serrated & without serration as required. We produce premium quality Flange Nuts with serrated face in various metals & metal alloys with ASTM/ASME/DIN Standards & Specifications.Flange Nuts are manufactured as per DIN 6923 Standard.We produce these Serrated Flange Nuts in

A2-70 SUS304 M8 stainless steel flange nut Flange nuts have a washer-like base to distribute pressure over a greater surface area and ensure the fastener stay tight. They are commonly used in manufacturing assembly lines where operations are speeded by using a single fastener instead of a nut and washer. Standard: DIN6923.IFI145 Size: 1/4”-3”, M5-M64 Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass Grade: SAE J995 Gr.2,5,8; CL4, 5, 6, 8, 10, 12 Thread: M, UNC, UNF