Heavy Hex Bolts

High Strength Heavy Structural ASTM A490 Type 3 heavy hex bolt ASTM A490 bolts are heavy hex bolts made of alloy steel with a flat bearing surface, washer faced, and chamfered point. They are used in structural steel joints in heavy construction applications that require greater yield and tensile strengths than those of an A325 bolt are required. They are available in diameters ranging from ½” up to 1-1/2” and come in two types. Type 1 bolts are made from alloy steel, and

3pcs/4pcs Heavy Duty yellow zinc Fix Bolt class 8.8 shield expansion anchor bolt In the case of what would appear to be solid brick, the wedge anchor should not be used because although the brick may look solid, it may be too porous to meet the requirements needed for installing a wedge anchor. Instead, the Sleeve Anchor is an expansion type anchor that should be considered for fastening to brick. Wedge anchors are designed to anchor objects into concrete. They are installed

High Strength Heavy Structural ASTM A490 Type 1 heavy hex bolt A490 covered two types of quenched and tempered, alloy steel heavy hex structural bolts having a tensile strength of 150 to 173 ksi. These bolts are intended for structural connections and are furnished. SIZE: 1/4" - 1.1//2", M6 -M36. And 600mm Max length. STANDARD: ASME B18.2.6 THREAD: ASME B1.1 , UNC, UNF, CLASS 2A FINISHED: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Dacromet, H.D.G. 490

Heavy hex bolts black surface UNC full thread ASTM A193 Grade B7 High strength bolts or structural bolts are made to be used with heavy hex nuts to connect structural members. To be considered a structural connection, it has to conform to specific ASTM standards; specifically, ASTM A563 or ASTM A194. Structural bolts are also categorized by grades. The grading system takes into consideration the bolt’s material, its size range, its proof load, the minimum yield strength, and

F3125 A490 Type 1 hot dip galvanized cold forged high tensile heavy hex bolt Designed for use in structural joints, these bolts are made from 4140 steel and meet ASTM A-490 specifications. Available in diameters from 1/2" to 1 1/2" and up to 30" in length. Matched 2H heavy hex nuts are always included. Head markings for an A-490 bolt is a stamped 'A490' somewhere on the head SIZE: 1/4" - 1.1//2", M6 -M36. And 600mm Max length. STANDARD: ASME B18.2.6 THREAD: ASME B1.1 , U

Black color 4140 steel ASTM A193 Grade B7 heavy hex head bolts Structural fasteners are strong, heavy-duty fasteners that are necessary for the construction of structures which include steel to steel connections. In other words, they are used when one metal structure needs to be connected to another. The typical application of structural fasteners is in bridge and building construction, where they are used to connect metal beams and girders. To be considered for structural

ASTM A193 Grade B8M class 2 Stainless steel 316 Heavy hex bolts Heavy hex bolts have a larger head than a standard hex bolt. They are used for bridges, highway, buildings and other construction projects. Heavy hex bolts work well with construction materials such as wood and steel. The main difference between a heavy hex bolt and a regular (or finished) hex bolt is the distance across opposite flats of the hex. Heavy hex bolts are 1/8 of an inch larger than a finished hex bolt

Stainless steel 304 Wedge Anchor expansion Bolts Wedge anchors are a unique type of concrete anchors, designed to anchor objects into concrete applications. Concrete Wedge Anchors are installed into a pre-drilled hole using the appropriate Concrete Drill Bit, where the wedge is expanded by tightening the nut. Once installed, wedge anchors are not removable after the anchor has expanded. Wedge Anchors are also called by other names such as stud anchors, concrete stud anchors,

Stainless Steel SS304 Wedge Anchor Heavy Duty Wall expansion Bolts​ A wedge anchor is a mechanical type expansion anchor that consists of four parts: the threaded anchor body, the expansion clip, a nut, and a washer. These anchors provide the highest and most consistent holding values of any mechanical type expansion anchor. Wedge anchors are a non-bottom bearing anchor for use in solid concrete or grout-filled concrete. They come in an variety of diameters and lengths, with

Heavy Duty expansion anchor yellow zinc ceiling wedge Fix Bolt Wedge anchors are designed to anchor objects into concrete. They are installed into a pre-drilled hole, then the wedge is expanded by tightening the nut to securely anchor into the concrete. They are not removable after the anchor is expanded. SIZE: 1/4" - 1", M6 -M18. STANDARD: ASME B18.2.6 THREAD: ASME B1.1 , UNC, UNF, CLASS 2A FINISHED: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Dacromet,

ASTM A193 Grade B7 Heavy hex bolts with ASTM A194 2H heavy hex nut Heavy hex cap screws and heavy hex bolts feature a large fastener head for distributing clamping load. These fasteners are used at high pressures and temperatures. Hex cap screws have a washer face underneath the head and are used in precise applications. Heavy hex head bolts are commonly used to make structural connections in buildings, bridges, and railways. A193 Grade B7: Alloy steel, AISI 4140 / 4142

Black finish ASTM A563 Grade A hex nut with heavy hex structural bolts A307 GRADE B Heavy hex bolts have a head that is larger than a standard (finish) hex head. Standard heavy hex structural bolts are made of low to mid carbon steel. The large head offers a greater bearing surface that distributes the clamping load over a greater area. The ASTM A307 specification covers carbon steel bolts and studs ranging from 1/4" through 4" diameter. This is your everyday, run of the mill

Galvanized Drop in anchor DIN standard 4.8 Grade Zinc Plated unifix In Concrete A Drop-In anchor consists of a zinc plated steel tubular expansion shield and a solid, cone-shaped expander plug. The expander plug is case hardened and tempered to prevent galling and binding during expansion. The shield has four equally spaced slots for a portion of its length and the bottom part may be knurled. The shield also has a smooth, flangeless top that allows for either flush or

Zinc plated 5/16 inch thread Heavy-duty Concrete Wedge Anchor Bolt Wedge Anchors are installed into drilled holes, exclusively in concrete. The non-threaded end is embedded into the hole and then struck to activate the expansion mechanism. This expansion gets fully utilized as the nut is tightened over the washer on the material being fastened. The majority of the wedge anchor remains embedded in the solid concrete material. The end that is sticking out is used to secure

Yellow chromate 3/8 inch thread Heavy-duty Concrete Wedge Anchor Bolts Wedge Anchors are commonly used on oil rigs, docks, piers, floors, walls, or slabs. They are available in Zinc Plated Steel, Hot Dip Galvanized Coating, and both 304 and 316 Stainless Steel grades. Wedge Anchors are available in 1/4"-20, 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10, 7/8"-9, and 1"-8 sizes, with the nut and washer included. SIZE: 1/4" - 1", M6 -M18. STANDARD: ASME B18.2.6 THR

1/2 inch thread UNC Concrete Wedge Anchor expansion Bolts Wedge anchors are designed to anchor objects into concrete. They are installed into a pre-drilled hole, then the wedge is expanded by tightening the nut to securely anchor into the concrete. They are not removable after the anchor is expanded. SIZE: 1/4" - 1", M6 -M18. STANDARD: ASME B18.2.6 THREAD: ASME B1.1 , UNC, UNF, CLASS 2A FINISHED: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Dacromet, H.D

Stainless steel 316 wedge anchor through bolt Wedge anchors can be removed from concrete in one of three ways: If the hole beneath the anchor is deep enough, simply pound it into the concrete with a hammer. Use a saw or grinding wheel to cut the anchor off just above the surface, and pound the rest flat with a hammer. Wedge anchors are a non-bottom bearing anchor for use in solid concrete or grout-filled concrete. They come in an variety of diameters and lengths, with

Heavy Structural ASTM A325 hot dip galvanized heavy hex bolt ASTM A325 is an ASTM International standard for heavy hex structural bolts, titled Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength. The equivalent metric standard is ASTM A325M, which is titled Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength. SIZE: 1/4" - 1.1//2", M6 -M36. And 600mm Max length. STANDARD: ASME B18

High Strength M10 ASTM A325M grade 8.8 zinc plated heavy hexagon bolt ASTM A325 structural bolts are heavy hex bolts made of medium carbon steel with a flat bearing surface, washer faced, and chamfered point. They are commonly used in structural steel joints in heavy construction and available in diameters ranging from 1/2” up to 1-1/2”. A325 structural bolts come in two types. Type 1 is a medium carbon steel and can be galvanized; Type 3 is a weathering steel that offers

Cold forged yellow zinc Trivalent chromium A325 structural heavy hex bolt Heavy hex bolts are required based on a number of different ASTM bolt specifications. In the chemical and petroleum industries, the A193 specification calls for heavy hex bolts and nuts in high heat conditions. The A320 standard covers extremely low temperature conditions and requires the use of heavy hex bolts. Also in ASTM specifications the A307 standard dictates that heavy hex bolts are required in