Patient Monitor Accessories

GE HealthCare Cam 14 Patient Monitor ECG/EKG Trunk Cable 2016560-003 4.6M/15FT for MAC5500 Medical Device Description This ECG trunk cable, model number is 2016560-003, has 4.6 meters long and capable of long-distance use, making it an indispensable accessory for medical equipment used in electrocardiogram (ECG) examinations. It is primarily used to connect electrodes and electrocardiographs to facilitate the transmission and recording of electrical signals generated by the

Drager Savina Ventilator Consumables O2 Cell Oxygen Sensor MX01049 for Medical Equipment Description The oxygen sensors are mainly used to measure and monitor the O2 concentration of inhaled and/or expired gases in anesthesia and respiratory equipment. The gas concentration is detected based on the principle of electrochemical reaction. When the gas to be measured enters the sensor, the gas molecules react with the redox products on the electrode surface, resulting in current

GE ECG Trunk cable REF:2106309-002 3-ld Wire Integrated Grabber Leadwire IEC 3.6m 12ft GE ECG Trunk cable REF:2106309-002 ► Brief Introduction GE Healthcare's ECG Backbone Cable (reference number: 2106309-002) is an electrocardiogram (ECG) cable with integrated 3-lead clip-on leadwires that complies with International Electrotechnical Commission (IEC) standards and is 3.6 meters (12 feet) long. This cable is used to transmit the patient's ECG signals to GE monitoring

Edan SpO2 Finger Sensor Adult SH1 02.01.210119029 2.5M Reusable for Pulse Oximeter Description The Edan SH1 Adult finger clip is a brand new and original sensor connect to the bedside monitor with a connecting cable. It works with Edan patient monitor. SpO2 sensor is the necessary part of the patient monitor, the high-quality sensors are more stable, saving a lot of cost of replacing new SpO2 sensors, and also affecting the performance of the monitor, suitable for adult

GE CareFusion Multi-Link ECG Leadwire REF:411200-001 Replaceable Set 5-lead Snap AHA 74cm 29 in GE CareFusion Multi-Link ECG Leadwire REF:411200-001 ► Brief Introduction The GE CareFusion Multi-Link ECG Lead Cable (Model: 411200-001) is a replaceable 5-lead electrocardiogram (ECG) lead cable set that uses a snap connection, meets American Heart Association (AHA) standards, and is 74 cm (29 inches) long. The 5-lead design allows it to support 12-lead ECG monitoring, providing

Maquet Servo I Servo S Ventilator Parts Expiratory Cassette 6447960 for Hospital ICU Medical Device Description The expiratory cassette needs to be replaced regularly, and it is easy to replace: turn off the ventilator, remove the old exhalation seal box, install the new exhalation seal box, confirm that it is installed correctly and connected correctly, and turn on the ventilator for testing. Features: 1. Optimized Exhalation Performance: This cassette is designed to improve

GE Anesthesia Accessories Flow Sensor 2089610-001-S 4 Pin Connector for Medical Equipment Consumables Description Newest flow sensor designed to work in wet environments with kink prevention for pressure sensing wire. One-piece flow sensor body design with titanium baffle. Minimum 1 year service life. Can be used in MRI environments. Features: 1. Precision: The 2089610-001-S flow sensor ensures accurate measurements for GE anesthesia systems. 2. Compatibility: Seamlessly

Biolight BLT A Series Q Series Spo2 Extension Cable P/N:15-031-0016 Medical Accessories Biolight Spo2 Extension Cable P/N:15-031-0016 ► Brief Introduction Biolight BLT A series and Q series SpO2 extension cable, part number 15-031-0016, is an extension cable used to connect the blood oxygen sensor to the monitor. This extension cable is usually connected when the distance between the blood oxygen sensor and the monitor is not enough. It is used to extend the transmission path

ECG Trunk Cable M1669A 989803145071 AAMI IEC 3-Lead 2.7M Reusable Medical Accessories Reusable ECG Trunk Cable M1669A 989803145071 ► Brief Introduction ECG Trunk Cable M1669A is a high-quality 3-lead ECG trunk cable that meets AAMI and IEC standards. It is 2.7 meters long and is suitable for ECG monitoring equipment. It is used to connect patients to ECG monitors to collect and transmit ECG signals and monitor cardiac electrical activity in real time. Its features include

New Original Drager MP00953 NBP Extension Hose Adult 3.7Meters Draeger MP00953 NBP Extension Hose ► Brief Introduction MP00953 Hose is an adult non-invasive blood pressure (NBP) extension hose produced by Drager. It is 3.7 meters long and is mainly used in medical environments to connect the patient's blood pressure cuff to the monitor for non-invasive blood pressure measurement. The extension hose usually tied to the patient's upper arm. It helps medical staff to measure and

Drager SPO2 Finger Sensor MS13235 Reusable 7-pin Adult New Original New original Drager SPO2 Finger Sensor MS13235 ► Brief Introduction Drager SPO2 Finger Sensor MS13235 is an adult patient blood oxygen saturation (SpO2) sensor for Drager monitors. Its model is MS13235, with a 7-pin connection design and is a reusable device. The sensor is mainly used to measure the patient's blood oxygen saturation and pulse rate. It is an essential component in the monitor equipment and is

Mindray DRYLINE II Water Trap 100-000080-00 for Anesthesia Adult Pediatric Flat Top 10 Pieces per Box Description The Mindray DRYLINE II Water Trap is a part that's designed for use with Mindray patient monitor module, the main purpose is to collect water vapor in the exhaled gas to prevent it from condensing into water and entering the monitor, thereby protecting the monitor's detection module from corrosion and ensuring the accuracy of monitoring. Specification: 1. DRYLINE™

FUKUDA CardiMAX FX-7202 ECG Machine Print Head with Flex Cable AE108-8E701 used good condition ►Quick Detail: Thank you for your trust FUKUDA CardiMAX FX-7202 ECG Machine Print Head with Flex Cable AE108-8E701, when you choose it, please check if our machine model is consistent with yours. If it is not consistent, it will cause unnecessary return trouble after purchase; This Print Head with Flex Cable AE108-8E701 is selected by our experienced engineers from numerous second

FUKUDA CardiMAX FX-7202 ECG Machine LCD IF Board PCB-6871A used good condition ►Quick Detail: This product is FUKUDA CardiMAX FX-7202 ECG Machine LCD IF Board PCB-6871A, which is a small component used in the display screen of FUKUDA CardiMAX FX-7202 ECG Machine. The FUKUDA CardiMAX FX-7202 ECG Machine has a touchable display screen, and the LCD IF Board PCB-6871A provides great assistance in the convenient display of the screen. Red, green, and blue colors intersect on the

Nihon Kohden Spo2 Connection Cord K931 P/N:JL-900P 2.5m Medical Equipment Accessories Nihon Kohden K931 P/N:JL-900P Spo2 Connection Cord ► Brief Introduction K931 P/N: JL-900P 2.5m is a cable specifically designed for connecting blood oxygen sensors and monitors, produced by Nihon Kohden. It is commonly used in hospitals and medical institutions to connect blood oxygen probes and Nihon Kohden brand monitoring equipment to monitor patients' blood oxygen saturation (SpO2) and

Biolight S/P Series Oximeter Machine Spo2 Extension Cable 9 Pins 15-100-0357 Medical Equipment Accessories Description The SpO2 extension cable consists of a sensor, cable and interface, and is suitable for various types of blood oxygen probes. Using this extension cable can extend the measurement distance and avoid the inability to measure or inconvenience of measurement due to the cable being too short. SpO2 is mainly used to measure arterial oxygen saturation, which is the

Biolight BLT Reusable Spo2 Sensor 9 Pins with Finger Clip 15-100-0013 A1418-SA203MV for Hospital Description The advanced sensing technology can accurately and quickly measure the patient's pulse oxygen saturation to ensure the accuracy of the monitoring data. The sensor is made of soft material, fits the skin, is comfortable to wear, and will not cause discomfort to the patient. It is used in a variety of medical scenarios, including pediatrics, postoperative monitoring, etc

GE REF:2104726-001 ECG Value Cable 10 lead Cable/LDWR IEC for GE MAC Series ECG Machine GE ECG Value Cable REF:2104726-001 ► Brief Introduction GE REF: 2104726-001 ECG Value Cable is a 10-lead ECG extension cable, which is used to transmit ECG electrode signals on the patient's skin to ECG monitoring equipment to achieve real-time monitoring of ECG waveforms. As a 10-lead cable, it can monitor ECG signals of multiple leads at the same time, providing detailed ECG information

Adult NIBP Air Hose M1599B REF:989803104341 3.0m New original Medical Accessories Adult NIBP Air Hose M1599B REF:989803104341 ► Brief Introduction This product is a 3.0-meter-long air tube specifically designed to work with a lot of medical devices for non-invasive blood pressure measurement in adults. It connects to the blood pressure cuff and monitoring equipment, and helps measure the patient's blood pressure by pressurizing and deflating air. Its specific functions are:

Nihon Kohden ECG-2350 ECG Machine Printer Head SHEC CH216-9920 used good condition ►Quick Detail: Thank you for your trust and attention. The product is Nihon Kohden ECG-2350 ECG Machine Printer Head SHEC CH216-9920, used good condition. It has been tested by our professional engineers with precision instruments and can be used well on Nihon Kohden ECG-2350 ECG Machine to help the machine print important data. ►NOTES : During the installation and use of the print head, it