Industrial Ethernet Media Converter

24V 40A Industrial DIN-Rail Power Supply Key Feature Universal 180 - 264VAC or 254 - 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -40℃ to +85℃ Efficiency up to 95% 130% peak load Supports 3+1 parallel to increase power and current sharing Active PFC, PF＞0.95 DC OK function Double-sided conformal coating Operating altitude up to 5000m 3 years warranty Output short circuit, over-current, over-voltage, over

AC/DC 240W DIN-Rail Power Supply Features of 48V Power Adapter Universal 85 - 264VAC or 120 - 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -40℃ to +70℃ High efficiency, high reliability Built-in active PFC function 150% peak load output for 3 seconds LED indicator for power on Output short circuit, over-current, over-voltage, over-temperature protection Safety according to IEC/UL/BS EN 62368, UL61010, UL508,

Din Rail Gigabit PoE+ Fiber Media Converter Introduction to Gigabit Media Converter Features one 10-/100-/1000-Mbps copper port and one SFP fiber port UTP port is auto-sensing with Auto MDI/MDI-X and supports 802.3af 802.3at POE Rugged metal case Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant Detect the PoE models of electrical devices Specification of Rugged Fiber

Gigabit 30W PoE Media Converter Key Features of Industrial Media Converter Support power on PoE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable. IEEE 802.3af/at power on to 1 RJ45 port 1x 10/100/1000Mbps Auto-sensing RJ45 ports 1x 100/1000Mbps SFP fiber ports 6KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure

Outdoor Gigabit 48V PoE Ethernet Media Converter Introduction to Rugged Media Converter IM-PC111GE series is the 10/100/1000 Mbps industrial POE fiber media converter featuring IEEE 802.3af /at power on to 1 RJ45 port 6KV Ethernet surge protection for harsh outdoor environment Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard

CE/UL Listed DC48V Din Rail Power Supply Key Feature Universal 90 - 264VAC or 120 - 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -30℃ to +70℃ High I/O isolation test voltage up to 4000VAC Low ripple & noise Output short circuit, over-current, over-voltage, over-temperature protection DIN rail TS-35/7.5 or 15 mountable Suitable for small chassis and narrow space installation Specification Input Item Operating

Industrial PoE Fiber Ethernet Media Converter Introduction to 10/100Mbps Media Converter IM-PC111FE series is the 10/100 Mbps industrial POE fiber media converter with below features comply with IEEE802.3af/at power on POE IP cameras through the Ethernet cable simple construction, power range up to 100 meters, operating temperature-40 ℃ to + 75 ℃ meet IP40 protection degree and EMC industrial grade requirements DIN rail installation pass through dangerous environmental

Gigabit Optical Fiber Converter Din Network Switch DC12-52V Dual Power Input Key Features of fiber optic media converter 2 x 10/100/1000Mbps Auto-sensing RJ45 ports 1 x 1000Mbps SFP fiber port 6 KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant A store-and-forward switching mechanism

Olycom Din Rail Power Supply 24 V Introduction IM-DAC220/DC24V1A converts AC220V to DC24V for industrial Ethernet switches featuring cost-effective energy efficient standard DIN-rail mounting With good EMC performance, immunity to noise and reliability, it could ensure stable and continuous operation of the automation system Key Feature Universal 85 - 264VAC or 120 - 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range:

Industrial DIN Power Supply 12V Introduction IM-DAC220/DC12V1.67A converts AC220V to DC12V for industrial PoE switches featuring cost-effective energy efficient Universal 85 - 264VAC or 120 - 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -30℃ to +70℃ High efficiency up to 86%, high reliability DC OK function Output short circuit, over-current, over-voltage, over-temperature protection Operating altitude up to

Gigabit PoE Industrial Fiber Media Converter Specification of PoE Media Converter Product Name 10/100/1000Mbps Industrial PoE Fiber Switch(1F+1TP) Model No. IM-PC111GE Port 1x100/1000M SFP Fiber SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 1x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 1x6-PIN Power Terminal Block Protocol IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3af 15.4W(PoE) IEEE 802.3at

2 Port Industrial Ethernet Media Converter Gigabit Introduction of Industrial Media Converter IM-MC110GE series is the 10/100/1000 Mbps industrial fiber switch. operating temperature -40 ℃ to + 75 ℃ support wide voltage dual power input meet IP40 protection degree and EMC industrial grade requirements DIN rail installation pass through dangerous environmental certification and comply with FCC and CE standards The reliable industrial grade design could ensure continuous and

480W DIN-Rail Industrial Power Adapter Key Features of PoE Power Supply Universal 85- 264VAC or 120- 370VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -40℃ to +70℃ The efficiency is up to 94.5% High I/O isolation test voltage up to 3000VAC DC OK function Active PFC, PF > 0.99 Low ripple & noise Output short circuit, over-current, over-voltage, over-temperature protection, input undervoltage protection DIN rail TS-35/7

AC/DC 120W DIN-Rail Power Supply Key Features of 48V Power Adapter Universal 85 - 264VAC or 120 - 370 VDC Input voltage Accepts AC or DC input (dual-use of same terminal) Operating ambient temperature range: -40℃ to +70℃ High efficiency up to 94%, high reliability DC OK function Active PFC 150% peak load output for 3 seconds DC ON output status indicator LED Output short circuit, over-current, over-voltage, over-temperature protection Operating altitude up to 5000m OVCⅡ

Industrial Ethernet Media Converter Gigabit Introduction of Ethernet Media Converter IM-MC110GE series is the Gigabit industrial ethernet media converter with below features Operating temperature -40℃ to + 75℃ Support wide voltage dual power input Meet IP40 protection degree and EMC industrial grade requirements DIN rail installation Pass through dangerous environmental certification and comply with FCC and CE standards The reliable industrial grade design could ensure

15.4W 30W PoE Gigabit Industrial Media Converter Features Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable. IEEE 802.3af /at power on to 1 RJ45 port 1 x 10/100/1000Mbps Auto-sensing RJ45 port 1 x 100/1000Mbps fiber port 6KV Ethernet surge protection, adapt to a harsh outdoor environment Max power to15.4W under af standard, 30W under at standard to each PoE port Detect the PoE models of electrical equipments. A store-and

Manufacturer of 5 port 10/100/1000mbps ethernet switch 4RJ45+1SFP outdoor poe switch Key Features of Gigabit Ethernet Switch Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable. IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports 4 x 10/100/1000Mbps Auto-sensing RJ45 ports 1 x 100/1000Mbps SFP fiber ports 6 KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX Flow control mode: full duplex with

Mini 2 port 10/100mpbs fiber media converter with 1RJ45+1SFP LC ethernet switch for outdoor use Key Features of unmanaged ethernet switch 1 x 10/100Mbps Auto-sensing RJ45 ports 1 x 100Mbps SFP fiber port 6 KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant A store-and-forward switching

3 port 10/100mbps fast ethernet unmanaged POE fiber media converter for outdoor Key Features of POE Fiber Media Converter: Product Name: 10/100Mbps Industrial POE Fiber Switch (1F+2TP) Model No.: IM-FP122FE Switching featuresTransmission mode: storage and forwardSystem bandwidth:40Gbps (non-traffic jam) Network media10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m)100BASE-TX: CAT5 or above shielded twisted pair(≤100m)SFP port,transmission distance: 20Km,40Km,60Km

3 port Gigabit Fiber Optic Media Converter 12v 24v industrial switch with sfp Introduction of fiber optic media converter IM-FS120GE series is the 10/100/1000 Mbps industrial fiber switch, operating temperature-40 ℃ to + 75 ℃, support wide voltage dual power input, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade