EVSE Testing Equipment

Compliant with IEC 61851-23:2023, this apparatus tests cable anchorage pull force and torque for EV AC/DC charging stations. Features PLC automatic control, adjustable tensile force up to 500N, and torque up to 16.3N·m. Durable, precise, with power-off memory for reliable testing.

Complies with IEC 62196-1:2022 and IEC 62752:2016 for testing EV plug and connector resistance to vehicle crushing. Applies 5000N or 11000N force via P225/75R15 tire at 8 km/h. Features PLC control, adjustable weights, and safety protections. Ideal for B2B industrial quality assurance.

8-channel temperature rise test system for EV connectors, compliant with IEC 62196 and IEC 60309. Features AC 0.50-400.0A adjustable current, 0-400°C measurement range, touch interface, and RS232 data logging. Ideal for assessing connector heating under rated load.

Compliant with IEC 61851-1:2017 clause 11.6, this tester evaluates cable anchorage pull force and torque for EV charging stations. Features PLC automatic control, touch screen operation, and weight superposition for precise 160N-500N pull and 0.6-16.3Nm torque. Includes power-off memory and customizable test cycles.

Complies with IEC 60068-2-75 and IEC 62262 for IK07 to IK11 ratings. Features electromagnetic release, adjustable impact point, and anti-secondary impact. Ideal for testing enclosures, switches, and sockets. Custom options available.

Compliant with IEC 62368-1 and IEC 60950-1, this 10kV impulse test generator features a 7-inch touch LCD, intelligent high voltage protection, and adjustable output polarity. Ideal for EVSE and electronic testing with 1-9999 impact cycles and 3-999s interval.

Professional articulated probe for UL 2594 Clause 8.2 Figure 6 compliance testing. Features stainless steel probe and durable nylon handle construction. Essential for evaluating electrical equipment enclosure safety by testing openings up to 54mm and ensuring proper spacing from hazardous components. Complies with international safety standards for user protection.

Compliant with IEC60068-2-75, IEC60884-1, and IEC62262. Features 1J to 20J striking energy, adjustable impact height up to 500mm, and anti-secondary impact brake. Ideal for testing enclosures, plugs, and switches. Custom options available.

Professional 20kV impulse voltage generator for EV charging pile testing, compliant with IEC 61851-1 and IEC 61851-23 standards. Features 1.2µs/50µs waveform, 300V-20kV voltage range, and programmable 1-9999 test cycles. Ensures charging equipment withstands transient over-voltages with precise destructive testing capabilities.

Compliant with IEC 62368-1, this 7kV impulse test generator detects transient overvoltage and evaluates electrical clearance. Features adjustable impact interval, positive/negative polarity, and internal resistance per ITU-T K.44. Ideal for household appliances and electronic apparatus.

Designed for IEC 61851-1 and IEC 60664-1, this tester evaluates transient overvoltage resistance and dielectric withstand. Features 1.2/50µs impulse wave, 12.5kV DC, and built-in resistances. Ideal for EVSE, appliances, and low-voltage electronics. Reliable fault detection with visible spark and audible noise.

Complies with IEC 60529 and ISO20653 for rain and spray testing. Features 6 adjustable nozzles, 4000 mm turntable with 1T load, and variable frequency control. Durable SUS304 tank and customizable spray angles ensure precise, reliable performance for industrial enclosures.

Complies with IEC 60529 and ISO20653. Features 3 IPX5 and 3 IPX6 nozzles with adjustable spray angle and flow. Automatic control system with variable frequency technology. Durable SUS304 water tank. Ideal for rain and spray testing of electrical enclosures.

Complies with IEC 60529, ISO20653. Automatic spray covers 5 surfaces of ESS systems. Features adjustable pressure 30-150kPa, servo motor drive, and stainless steel construction. Ideal for outdoor charging station waterproof testing.

Professional 12.5kV impulse dielectric withstand testing equipment for EVSE and electronic components. Features 1.2µs/50µs lightning wave generation, multiple internal resistance options (12Ω, 40Ω, 500Ω), and compliance with IEC 61851-1, 60664-1, and 61180 standards. Ideal for testing electrical clearance and transient over-voltage protection in automotive and consumer electronics.

Complies with IEC60068-2-75 and IEC62262 for impact resistance testing. Features adjustable impact angle 0-90°, electrical lift, and anti-secondary impact. Ideal for charging stations and electronic enclosures.

Industrial-grade IPX9 water jet test system featuring 80°C heating capability, 8000-10000Kpa pressure range, and 650kg sample capacity. Complies with IEC 60068:2022 and IEC 60529:2020 standards. Includes Italian high-pressure pump, robotic arm trajectory control, and advanced ceramic heating technology for reliable EV charging pile certification testing.

Professional EV charging station waterproof testing equipment compliant with IEC 61851 standards. Features 1600mm turntable with 1000kg load capacity, PLC touch screen control, and comprehensive IPX3-IPX6 testing with automatic flow control and distance sensing. Ideal for certification testing of electric vehicle charging infrastructure with heavy-duty construction and precise water flow management.

Professional EVSE testing equipment for electric vehicle inlet and connector drive over testing. Features 5000N-11000N adjustable crushing force, (8±2)km/h speed control, and compliance with IEC 62196-1, IEC 62752, and IEC 61851 standards. Includes PLC control system, dual tire configuration, and comprehensive safety protection for reliable compliance testing.

Professional IPX3/IPX4 spray test equipment designed for charging stations and large products. Features adjustable spray height (400-3000mm), dual nozzle system with 12.5L/min flow rate, and touch screen controls. Complies with IEC60529 standards for reliable waterproof testing with precision flow control and safety protections.