Fiber Optic Accessories

2.5Gb/s 20km SFP Transceiver (Multi-rate)Hot Pluggable, Duplex LC, +3.3V, 1310nm, DFB-LD, Single-mode, DDM Fiber Optic Accessories Advantages: 3.3V single power supply 550m transmission with 50/125µm MMF, 300m transmission with 62.5/125µm MMF Supports 1.0625/2.125/4.25Gb/s Fiber Channel Operatio Gigabit Ethernet compatible 850nm VCSEL laser transmitterSFP MSA SFF-8074i compliant Digital Diagnostic SFF-8472 compliant Compatible with RoHS Operating case temperature: Commercial:

1.25Gbps SFP Bi-Directional Transceiver, 20km Reach 1310nm TX / 1490nm RX Fiber Optic Accessories Advantages: Dual data-rate of 1.25Gbps/1.063Gbps operation 1310nm DFB laser and PIN photodetector for 20km transmission Compliant with SFP MSA and SFF-8472 with simplex LC Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET OC-24-LR-1 Compatible with RoHS +3.3V single power supply Operating case temperature range of 0°C to +70°C

FTB Series Fiber Termination Box (wall mount with lock) Fiber Optic Accessories Advantages: Provide fusion and storage appliance for optical cables Reliable protection appliance of fixing, stripping and earthing for optical cables Whole range protected design for fiber lay to ensure the bending radius ≥40mm Provide various accessories to avoid any unexpected damage to the fiber Overview The body of FTB Series Wall Mount Fiber Terminal Box is made of quality cold-rolled iron

Passive PoE Kit ( Passive PoE Splitter + Passive PoE Injector ) Fiber Optic Accessories Advantages: ► Passive PoE Splitter + Passive PoE Injector ► Easy to install PoE Application for AP, CPE, IPCam, IP Phone ► Use the Power Supply from Powered Device ►Accept up to 57V Voltage Inpu Overview LNK-POE-2P is a passive Power over Ethernet kit, including one passive splitter and one passive injector. It provides the most convenient and cost effective way for you to make PoE

Outdoor Armored 2-12Core SM Fiber Patch Cable (SC, LC, FC, ST Connector Optional Fiber Optic Accessories Advantages: ► Outdoor Armored Cable, 9/125, 2-12 Core, Single mode ► SC, LC, FC, ST Connector Optional ► Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property ► Novel flute design, easily strip and splice, simplify the installation and maintenance ► Ceramic connectors ensure low signal loss, and high reliability ► All

12LC Quad Din-rail Mount Fiber Patch Panel Model :LNK-FSB-D-12LC Overview E-link 24-port industrial din-rail mount patch panels are designed for either to support direct termination or fusion splicing of the fibers. The materials used for the patch panel is of high quality anodized aluminum with natural finishes making it light weight and compact in size. Features designed to save space especially when mounted within enclosures or cabinet with other din rail mount equipment.

12ST Duplex Din-rail Mount Fiber Patch Panel Model : LNK-FSB-D-12ST Overview E-link 24-port industrial din-rail mount patch panels are designed for either to support direct termination or fusion splicing of the fibers. The materials used for the patch panel is of high quality anodized aluminum with natural finishes making it light weight and compact in size. Features designed to save space especially when mounted within enclosures or cabinet with other din rail mount

12SC Duplex Din-rail Mount Fiber Patch Panel Model:LNK-FSB-D-12SC Overview E-link 24-port industrial din-rail mount patch panels are designed for either to support direct termination or fusion splicing of the fibers. The materials used for the patch panel is of high quality anodized aluminum with natural finishes making it light weight and compact in size. Features designed to save space especially when mounted within enclosures or cabinet with other din rail mount equipment.

Advanced 4-Port USB 2.0 Fiber/UTP Extender for Uninterrupted Connectivity Model:LNK-U4TF1-2.0 Overview E-link 4 Port USB 2.0 Fiber/UTP Optic Extender support both Fiber and UTP cable transmission. This device breaks through the USB transmission distance limit of no more than 5 Meter, and realizes the extension of USB signal more than 100 Meter through the network cable. The use of optical fiber cable can extend the distance up to 6KM.The device can be widely used in military

6 Ports DIN-Rail Fiber Splice Box Model:LNK-FSB-6 Overview LNK-FSB-6 Series 6-Port DIN-Rail Fiber Splice Box is suitable for 6-Port SC Duplex Adapter, ST Duplex Adapter or LC Quadruplex Adapter, and it is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected. Features ► Cold-roll steel, electrostatic

Product Description: The 2U height 14-slot rack mount chassis for AC sockets is specifically designed to accommodate chassis-based Media Converters and other modules. It is a standard 19-inch 2U height chassis that can be easily mounted in a 19-inch rack. With this chassis, you can install multiple media converters and network devices in one place, allowing for efficient use of space and creating a tidy and organized cabling system. The 14-slot AC sockets rack mount chassis

Product Description: E-link 100G QSFP28 Passive Copper Cables (LNK-DP7D30-XXX) are designed to provide high performance and cost effective I/O solutions for various applications such as 100G LAN, HPC, and SAN. These cables are compliant with the SFF-8436 standard and offer low power consumption for short reach interconnect applications. Each lane of the cable is capable of transmitting data at speeds up to 25.78Gb/s, resulting in an aggregated rate of 100Gb/s. Features High

Product Description: E-link Semiconductor Optical Amplifier Products E-link Semiconductor Optical Amplifier products are designed for providing amplification around the 1310nm range. It can conveniently be used in 10G/40G/100G systems. It comes in three different versions - 1x1, 2x2, and 4x4 - respectively providing 1-way, 2-way, 4-way and 8-way 1310nm 100G optical signal amplification. It offers maximum output power up to 10dBm. Features: The O-band module supports a

Product Description: The DVI KVM Extender provides extension of DVI signals over long distances through a single CAT6 cable. It supports incredibly high resolution: up to 4K*2K. Moreover, RS232 and KVM signals can be transmitted with powerful security and good stability. The applications of the extender are vast due to its ability to transmit high resolution with high quality over long distance. In addition, its security and stability make it the perfect choice for all kinds

Product Description: The LNK-UVGA-KVM Extender can take high-definition video over long distances by using only a single cable. It helps with USB keyboard and mouse transmission, as well as external independent audio transmission -suitable for a variety of complex applications. This device has excellent image processing and transmission capability, ensuring that the signals are both smooth and stable. Working as a dependable and efficient way of extending VGA, keyboard, and

DIN Rail Wall Mount DVI KVM Extender RJ45 Transmits Video Signals HD-BaseT DVI KVM Extender Over 100m Single Cat6/7 Cable Overview The DVI KVM extender provides extension of DVI signals long distances over a single CAT6 cable, it supports high resolution up to 4K*2K, RS232 and KVM signal transmission function. The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by its good stability and powerful

1200M Mini Powerline Ethernet Adapter 1200M Mini Powerline Ethernet Adapter Advantages Adopt HomePlug AV2, transmission rate(PHY) up to 1200Mbps. Take MIMO technology, the bandwidth is much wider and the data transmission much more stable. No wiring and setting. Adopt QOS technology, guarantee the transmission stability of streaming media. Hardware or software encryption(optional) Overview The E-LINK LNK-P1200 which adopts HomePlug AV2 standard supplies the maximum transmissi

Product Description: The LNK-FSB-6 Series 6-Port DIN-Rail Fiber Splice Box is an ideal choice for a wide range of optical fiber systems. Its 6 ports are compatible with SC Duplex Adapter, ST Duplex Adapter and LC Quadruplex Adapter, making it highly versatile. It can be used for the distribution and connection of optical fibers, patch cores and pigtails for mini-network terminal solutions. It is especially suitable for the terminal distribution of mini-networks. The user

HD-SDI Video Extender over CAT5 / 6 Kit Supports 5V-12V DC HD-SDI Video Extender over CAT5 / 6 Kit Advantages ► SDI Standard: HD-SDI, SD-SDI ► Up to 50m / 160ft via CAT5e cable ► Up to 60m / 200ft via CAT6 cable ► Supports SDI-SMPTE 259M-C (270Mbps); ► HD-SDI-SMPTE 292M (1.485, 1.485 / 1.001 Gbps) ► LED diagnostics: sync, SDI auto-detection ► 5V~12V DC Overview LNK-DTS050 allows HD-SDI signal to be transmitted up to 60m / 200ft via CAT5/CAT6 cable in a point-to-point

2~4 Channel Video Multiplexer for 1 Coaxial Cable Features ► 2-4Channel video signal for camera over 1 coaxial cable ► Designed according to projects with minimum installation volume requirement ► Long distance transmission up to 500m ► Frequency Division Multiplexing, with all video and data transmission real-time and all images high-definition and non-delay. ► One coaxial cable, no extra cable, which save infrastructure cost,(cost saving 25~30%) ► Maintaining high quality