Gravity Separation Machine

High performance XCT Diaphragm Jig for laboratory Main uses and features: It is suitable for XCT type diaphragm jig for gravity beneficiation. Gravity beneficiation is based on the different specific gravity of the ore and the different settling speed in the medium. Parameter Main technical parameters of XCT type diaphragm Jig Parameter item Unit XCT 100×150 XCT 200×300 Jig room length mm 150 300 Jig room width mm 100 200 Number of jigging rooms 2 2 Jig room area m² 0.03 0.06

High performance XCT Diaphragm Jig for laboratory Main uses and features:It is used in mineral processing laboratory to separate ferrous and non-ferrous metal minerals according to specific gravity difference in aqueous medium. ParameterMain technical parameters of XCT type diaphragm JigParameter itemUnitXCT 100×150XCT 200×300Jig room lengthmm150300Jig room widthmm100200Number of jigging rooms 22Jig room aream²0.030.06Eccentric Max Strokemm≤20≤32Feeding particle sizemm≤3

ISO-0805 Drum front shaker for Laboratory Metallurgy Main uses and features: It is suitable for screening metallurgical sinter and is an ideal equipment to replace manual screening, reduce the labor intensity of operators, and improve the accuracy and comparability of screening. And it has the characteristics of compact structure, convenient use and reliable operation. The electrical control is equipped with an intelligent counting controller, so that the sample in the sieve

ISO-0805 Drum Back Shaker Main uses and features: ISO drum rear shaker is suitable for screening metallurgical sinter, and it is an ideal equipment to replace manual screening, reduce the labor intensity of operators, and improve the accuracy and comparability of screening. And it has the characteristics of compact structure, convenient use and reliable operation. The electrical control is equipped with an intelligent counting controller, so that the samples in the sieve can

High performance XCT Diaphragm Jig for laboratory Main uses and features: It is suitable for XCT type diaphragm jig for gravity beneficiation. Gravity beneficiation is based on the different specific gravity of ore and the different sedimentation speed in the medium. The difference in mineral weight is used to complete the stratified separation of ore particle mixture. This product is produced by the only enterprise designated by the original Ministry of Mines and Mines, and

ISO-0805 Drum Back Shaker Main uses and features: ISO-80 drum rear shaker screen is suitable for screening metallurgical sinter, and it is an ideal equipment to replace manual screening, reduce the labor intensity of operators, and improve the accuracy and comparability of screening. And it has the characteristics of compact structure, convenient use and reliable operation. The electrical control is equipped with an intelligent counting controller, so that the samples in the

FX series hydrocyclone Main uses and characteristics: Hydrocyclones are commonly used in metal concentrators in the second stage grinding or coarse concentrate regrinding process and closed-circuit use of mechanical classifiers to replace mechanical inspection classifiers and classify according to particle size. Parameter Main technical parameters of FX series hydrocyclone Item/Model FX-125 FX-150 FX-250 FX-300 FX-350 Overflow particle size (μm) 15-250 25-250 25-250 25-250 25

High performance XCT Diaphragm Jig for laboratory Main uses and features:It is suitable for XCT type diaphragm jig for gravity beneficiation. Gravity beneficiation is based on the different specific gravity of the ore and the different settling speed in the medium. The difference in mineral weight is used to complete the layered separation of the ore particle mixture. It is used for experimental research in metal, chemistry, construction, etc. ParameterMain technical

LY Shaker for Laboratory Mine Study Main uses and features: LY type shaker is one of the commonly used equipments for gravity beneficiation in laboratories for ore selectivity research, experiments and small beneficiation plants. It is suitable for the separation of fine-grained and fine-grained rare metals, ferrous metals, non-ferrous metals, precious metals and other ores and coals. It can not only be used as an independent beneficiation operation, but also can be used in

Laboratory LTP, LTA type diaphragm jig Main uses and features: The side-moving diaphragm jig is basically transformed from the Denver type jig. The bed layer is relatively stable, and the selection effect is good. The diaphragm and transmission device are on the fixed side of the jigger, which is convenient for maintenance. However, its floor space and equipment weight are larger than other jiggers with the same screen surface specification, and the power consumption is The

Laboratory BLL type glass fiber reinforced plastic spiral chute Main uses and characteristics: BLL type glass fiber reinforced plastic spiral chute is used for sorting fine-grained (including fine-grained) metal minerals, such as iron ore, ilmenite, chromite, pyrite, tungsten tin ore, niobium tantalum ore, sand Gold, seaside monazite, rutile, zircon and other metal and non-metal minerals with sufficient specific gravity difference. This product is produced by the only

Laboratory LX400X300 centrifugal concentrator Main uses and features: BLL type glass centrifugal concentrator is suitable for fine mud of -200 mesh metal mines, tungsten tin, tantalum niobium, rare earth ore, copper, lead and zinc ore. Structure : The main machine includes a drum, a chassis, a feeder, a feeder nozzle (two upper and lower), a punching nozzle, an ore receiving trough, a ore distributor, etc. Working principle : The centrifugal concentrator works intermittently,

Laboratory XCT Series Diaphragm Jig Introduction It is used in mineral processing laboratory to separate ferrous and non-ferrous metal minerals according to specific gravity difference in aqueous medium. Technical Parameters: Item XCT100×150 XCT200×300 Size 100×150mm 200×300mm Jig chamber 2 2 Area 0.03 ㎡ 0.06 ㎡ Stroke ≤20mm ≤32mm Times of stroke 420 R/MIN 346R/MIN Feed size -3mm -6mm Capacity 20~700kg/h 700kg/h Weight 150kg 200kg Outline size 750×520×1312mm 1110×800×1230mm

Laboratory Shaking Table for Metallurgy Introduction Shaking table is a common equipment used in laboratories for ore selectivity research, experiments and gravity beneficiation in small mines. It is divided into slime type (LYN) and ore sand type (LYS). It is suitable for the separation of fine-grained and fine-grained rare metals, ferrous metals, non-ferrous metals, precious metals and other ores and coals. Technical Parameters: Item Value Unit Bed size 1100×500 mm Stroke 9

LX400×x300 Centrifugal Concentrator Main uses and characteristics: This machine is suitable for fine mud of -200 mesh metal mines, tungsten, tin, tantalum and niobium, rare earth ores, copper, lead and zinc ores. The main machine includes a drum, a chassis, a ore feeder, a ore feeding nozzle (upper and lower two), a ore filling nozzle, an ore receiving slot, a ore distributor, etc. The centrifugal concentrator works intermittently, but the ore breaking, rushing and sorting of

XLL-600 Spiral Concentrator Main uses and features: XLL-600 spiral concentrator can be used to separate relatively coarse (0.02 ~ 2.0mm) metal minerals, such as tungsten tin, magnet, titanium iron, road iron, gold placer and seashore placer; they are also It can be used for washing 4-6mm pulverized coal. Working principle: The spiral concentrator has 3-5 turns of spiral grooves with a certain inclination, and the cross-section is parabolic or elliptical. After the pulp is fed

BLL type glass fiber reinforced plastic spiral chute Main uses and characteristics: BL type glass fiber reinforced plastic spiral chute is used for sorting fine-grained (including fine-grained) metal minerals, such as iron ore, ilmenite, chromite, pyrite, tungsten tungsten tin ore, niobium tantalum ore, Selection of gold placer, monazite, rutile, zircon and other metal and non-metal minerals with sufficient specific gravity difference. Effective particle size range for

LY Shaker for Laboratory Mine Study Main uses and features: This machine can be used in the laboratory for ore selectivity research, and is suitable for the separation of fine and fine-grained rare metals, ferrous metals, non-ferrous metals and precious metals and other ores and coal. It can be used as an independent beneficiation operation, and can be used in conjunction with other mineral processing machines such as jig, spiral concentrator, and centrifugal concentrator.

ISO-0805 Drum front shaker for Laboratory Metallurgy Main uses and features: This machine is suitable for screening metallurgy and sintered ore. It is an ideal equipment to replace manual screening, reduce the labor intensity of operators, and improve the accuracy and comparability of screening. And it has the characteristics of compact structure, convenient use and reliable operation. The electrical control is equipped with an intelligent counting controller, so that the

LTA down action, LTP side action jig Main uses and features: The side-moving diaphragm jig is basically remanufactured from the Denver type jig. The bed layer is relatively stable, and the selection effect is good. The diaphragm and transmission device are on one side of the jig, which is convenient for maintenance. The machine occupies a large area, has a large weight, and has a slightly higher power consumption. It is mostly used for roughing and selection operations, and