Laboratory Disc Mill

Laboratory ZM-T Vibration Mill Main uses and features: Vibration mill is a ball milling chamber fixed with the lower vibration mechanism. The vibration motor drives two adjustable eccentric blocks to rotate to make the cylinder vibrate, forcing the grinding medium and the material in the cylinder to vibrate at high frequency, so that the material is affected by the grinding medium. Strong impact, friction and shearing action crush the material. The fine particles re-enter the

ZM-T Vibration Mill for Laboratory Metallurgy Main uses and features: Vibration mill is a ball-milling cavity fixed with the lower vibration mechanism. The vibration motor drives two adjustable eccentric blocks to rotate to make the cylinder vibrate, forcing the grinding medium and materials in the cylinder to vibrate at high frequency. The material is crushed by the strong impact, friction and shearing action of the grinding medium. The fine particles re-enter the ball

Lab Vibrating Disc Mill with ISO9001 Certificated Main uses and characteristics: suitable for material crushing, sample preparation and testing in scientific research institutes and colleges and universities in industries such as geology, mining, metallurgy, coal, electric power, chemical industry, building materials, etc. This product is produced by the only enterprise designated by the original Ministry of Mines and Mines, and implements industry standards. GJ type sealed

Cylindrical ball mill MQJ-Φ460 Product description MQJ-Φ460 cylindrical ball mill is a fully enclosed dry and wet dual-purpose intermittent grinding equipment, which is used for semi-industrial laboratories or other materials (especially cement and ceramic industries) refractory materials, metallurgy, coal, light industry, chemical industry, agriculture, etc. It is a kind of transitional grinding equipment between continuous grinding and intermittent grinding, which is used

ZJM type stirring ball mill Main uses and characteristics: This machine is mainly used for ultra-fine grinding and grinding of raw materials in metallurgy, medicine, chemical industry, rubber, plastic, plastic, ceramics, paper, paint, cosmetics, electronics and other industries, and can granulate the required solid materials to one micron. Below, the materials composed of various raw materials can be effectively and uniformly mixed and pulverized in a short time. Parameter

Laboratory Four-roll fifty-cylinder rod mill for Light Industry Main uses and characteristics: This machine can be used for grinding fine ore in metallurgy, geology, chemical industry, building materials, coal, colleges and universities, scientific research institutes, mining concentrators, etc. for ore selectivity research. There are four kinds of grinding barrels with volumes of 0.25L, 0.5L, 1.0L and 2.0L. It can grind ore with single cylinder or multiple cylinders at the

XMB three-roll four-cylinder rod mill Main uses and features: XMB type three-roll four-bar mill can be used for grinding fine stones in metallurgy, geology, chemical, building materials and coal laboratories, research units and dressing plants for ore selectivity research. Features: This equipment is a new type of small, light and multi-purpose grinding equipment for laboratory use. It can be used for both wet and dry use, and can also be used as a ball mill instead of a

Porcelain lined ball mill for Laboratory Metallurgy Main uses and features: This machine is a new type of laboratory-type grinding equipment that avoids iron pollution. It can be used for wet and dry grinding in the laboratories of metallurgy, building materials, chemical industry, light industry, coal, hydropower, agriculture, geology, national defense and other departments to grind certain ores and other materials that are not contaminated by iron. Parameter Main technical

XMQ Cone Ball Mill for Laboratory Metallurgy Introduction: XMQ series conical ball mill is a laboratory grinding equipment. It can be used for wet grinding of fine ores in laboratory (1 50x50 conical ball mill can also be used for dry grinding), suitable for artificial heavy sand in metallurgy, building materials, chemical industry, light industry, coal, hydropower, agriculture and geological experiments , ore technology processing and other grinding materials. Technical

XMB three-roll four-cylinder rod mill Main uses and features: XMB type three-roll four-cylinder rod mill can be used for grinding fine ores in metallurgy, geology, chemical, building materials and coal laboratories, research units and concentrators for ore selectivity research work. Features: XMB type three-roll four-cylinder rod mill is a new type of small, light and multi-purpose grinding equipment for laboratory use. It can be used both dry and wet, and can also be used as

XPM-φ120×3 type three-head grinder Main application and characteristics: XPM-Φ120×3 three-head grinder is a kind of grinding equipment for dry grinding and analyzing samples. For the relevant parties as a general small amount of material grinding. Parameter Main technical parameters of XPM three-head grinder Parameter item Unit XPM-Φ120×3 Mortar diameter mm Φ120 Number of grinding heads piece 3 Rod speed r/min 220 Mortar speed r/min 9 Feed particle size mm -1.5 Product

GJ, F77 type sealed laboratory sample preparation grinder Main uses and characteristics: suitable for material crushing, sample preparation and testing in scientific research institutes and colleges and universities in industries such as geology, mining, metallurgy, coal, electric power, chemical industry, building materials, etc. Dust, easy to operate. This product is produced by the only enterprise designated by the original Ministry of Mines and Mines, and implements

XPM-φ120×3 type three-head grinder Main application and characteristics: XPM-φ120×3 three head grinder is a kind of grinding equipment for dry grinding and analysis of samples. It is mainly used for grinding and analysis of samples in the laboratories of the Ministry of metallurgy, building materials, chemical industry, coal, hydropower, commodity inspection and geology. It can also be used for grinding a small amount of general materials in the laboratory. Parameter Main

Laboratory Four-roll fifty-cylinder rod mill for Light Industry Main uses and characteristics: This machine can be used for grinding fine ores in metallurgy, geology, chemical industry, building materials, coal, universities, scientific research institutes, mining and mineral processing plants and other industries. There are four kinds of grinding barrels with volumes of 0.25L, 0.5L, 1.0L and 2.0L. It can grind ore at the same time with single cylinder or multiple cylinders,

Lab Vibrating Disc Mill/ Disc Grinding Mill for Metallurgy Main uses and characteristics: suitable for material crushing, sample preparation and testing in scientific research institutes and colleges and universities in industries such as geology, mining, metallurgy, coal, electric power, chemical industry, building materials, etc. This product is produced by the only enterprise designated by the original Ministry of Mines and Mines, and implements industry standards. GJ type

Three Head Laboratory Sample Grinders Machine for Sample Test Main application and characteristics: XPM 120x3 mechanical agate mortar and pestle miller is a kind of grinding equipment which mill and analyze samples through dry grinding. mechanical grinding miller are mainly used to mill and analyze samples by laboratories in departments such as metallurgy, building material, chemical, coal, water and electricity, commercial inspection, and geology. Laboratory Grinding Mill

Laboratory Ideal Cone Ball Mill Laboratory Grinding Machine For Metallurgy Use Introduction: XMQ series conical ball mill is a laboratory grinding equipment. It can be used for grinding of fine ores which is wet in laboratory (1 50x50 conical ball mill can also be used for dry grinding). It is made available for artificial heavy sand in metallurgy, building materials, chemical industry, light industry, coal, hydropower, agriculture and geological experiments, ore technology

Cone Ball Mill Laboratory Grinding Machine For Metallurgy Use Introduction: XMQ series conical ball mill is a laboratory grinding equipment. It can be used for wet grinding of fine ores in laboratory (1 50x50 conical ball mill can also be used for dry grinding). It is suitable for artificial heavy sand in metallurgy, building materials, chemical industry, light industry, coal, hydropower, agriculture and geological experiments, ore technology processing and other grinding

Three Head Sample Grinders For Dry Grinding Laboratory Main application and characteristics: XPM-Φ120×3 three-head grinder is a kind of grinding equipment for dry grinding and analyzing samples. For the relevant parties as a general small amount of material grinding. Three-head grinder can choose anyone head work seperately. It can also grind three different samples at same time. Working Principle Grinding head, mortar support and clutch are evenly installed on the rotating

30L ZMT Vibration Ball Mill Laboratory Disc Mill For Electronics Industry Main uses and features: Vibration mill is a ball milling chamber fixed with the lower vibration mechanism. The vibration motor drives two adjustable eccentric blocks to rotate to make the cylinder vibrate, forcing the grinding medium and the material in the cylinder to vibrate at high frequency, so that the material is affected by the grinding medium. Strong impact, friction and shearing action crush