EMC EMI Filter

Product Introduction This ferrite magnetic ring is manufactured from VN02 grade ferrite material with an initial permeability of 650. It features low loss factor and superior high‑frequency EMI suppression performance. Physical dimensions: outer diameter 14.2±0.5 mm, height 15.0±0.5 mm, inner diameter 7.2±0.4 mm. Benefiting from Curie temperature above 140℃ and high electrical resistivity, it keeps stable magnetic properties under working conditions. Strict dimensional

VIP1-1A-03 (10328) IEC Outlet RF Interference Suppressor Single Line Surge Reduction Module Product Overview VIP1-1A-03(10328) is a one-stage common-mode single-phase EMC power filter with built-in standard IEC inlet. Rated for 115/250VAC and 3A RMS, it operates at 50/60Hz power frequency. This compact IEC-integrated structure enables quick installation with high cost-efficiency. Applications Household electrical appliances Laboratory & precision measuring instruments Small

Product Description: The EMC EMI Filter is a highly efficient EMI Interference Suppression Filter designed to provide superior protection against electromagnetic interference in various electrical and electronic applications. Operating within a temperature range of -25°C to +100°C, this filter is engineered to maintain optimal performance even under demanding environmental conditions, ensuring reliable operation and longevity. Rated for a maximum current of 6A RMS, this EMI

VIP4-2A-06(B042W0956) is a single-phase AC line EMI power filter rated at 6A RMS and 115/250VAC, designed for 50/60Hz mains power systems. It adopts a topology with dual wound common-mode chokes combined with X and Y safety capacitors. The filter effectively suppresses both common-mode and differential-mode electromagnetic noise on AC power lines and attenuates high-frequency interference signals. It helps electronic devices pass EMC compliance tests including EN55014 and

Product Brief Introduction VIP4-1A-10 is a high quality single phase EMI power filter rated for 10A, developed to clear unwanted electrical noise along AC power lines. It accepts 115VAC and 250VAC input voltage and operates steadily under 50Hz and 60Hz mains frequency. Built with a single stage LC circuit structure, this filter efficiently mitigates common mode electromagnetic interference on power wires. It delivers purified power for electronic devices and enhances the

Product Introduction This ferrite magnetic ring is manufactured from VN02 grade ferrite material with an initial permeability of 650. It features low loss factor and superior high‑frequency EMI suppression performance. Physical dimensions: outer diameter 14.2±0.5 mm, height 15.0±0.5 mm, inner diameter 7.2±0.4 mm. Benefiting from Curie temperature above 140℃ and high electrical resistivity, it keeps stable magnetic properties under working conditions. Strict dimensional

1. Product Brief Manufactured with VN09 grade nickel‑zinc soft ferrite, the V18031 ring‑shaped ferrite core features an initial permeability of 850 and low loss performance. It achieves remarkable high‑frequency noise damping and electromagnetic interference mitigation effects. Rigorous size control ensures uniform performance from batch to batch, perfectly fitting mass production assembly operations. Featuring superior resistivity and great thermal tolerance, this core keeps

1. Product Brief The V18031 ferrite magnetic ring is a NiZn soft ferrite toroid core made of VN09 grade ferrite material. With initial permeability of 850 and low loss factor, this magnetic core provides powerful high‑frequency noise absorption and EMI suppression capability. Strictly controlled dimension tolerance ensures batch‑to‑batch consistency for mass assembly. It features high resistivity and wide working temperature range, stable magnetic performance under various

Factory Supply V18029 Snap-on Ferrite Core 6mm ID, VN09 Material EMI Noise Filter Magnetic Core for Electronic Cables Product Overview VIIP V18029 split clamp-style ferrite core is purpose-built for on-site EMC troubleshooting and noise suppression on pre-routed cables. Unlike solid toroidal cores requiring cable threading, this split ferrite design clamps directly onto finished wiring without cable disassembly or re-termination. Characterized by proven broadband impedance

Product Description: The EMC EMI Filter is a high-performance EMI Suppression Filter designed to effectively reduce electromagnetic interference in a wide range of electronic applications. Constructed using premium VNO9 material, this filter exhibits exceptional stability and durability, making it an ideal choice for environments where reliable electromagnetic compatibility (EMC) is critical. The use of VNO9 material ensures that the filter maintains its performance

Product Description: The EMC ElectroMagnetic Interference Filter, commonly referred to as an EMI Interference Suppression Filter or simply an EMI Suppression Filter, is an essential component designed to reduce electromagnetic noise and improve the performance of electronic devices. This product is engineered to provide superior filtration capabilities, ensuring that electronic systems operate with minimal interference from external electromagnetic sources. Its advanced

Product Brief V19006 is a snap‑on Ni‑Zn ferrite core made of VN09 grade magnetic material. It features minimum impedance of 115 Ω at 25 MHz and 210 Ω at 100 MHz for excellent high‑frequency EMI suppression. With precisely‑controlled dimensions and strict appearance inspection standards, this clip‑type ferrite adopts a split housing design for fast mounting without cutting cables. Boasting high Curie temperature and high resistivity, the component maintains stable magnetic

Product Description: The EMC EMI Filter is a highly efficient EMI Interference Suppression Filter designed to provide superior protection against electromagnetic disturbances in various electrical and electronic applications. Engineered to meet stringent industry standards, this filter plays a crucial role in enhancing the reliability and performance of electrical systems by minimizing unwanted electromagnetic interference (EMI) and ensuring smooth operation of connected

VIP4-2B-10(B042Q0551) Single-Phase Power EMI Filter Product Brief VIP4-2B-10 is a two-stage LC single-phase EMI power filter with 10A rated current for 115/250VAC, 50/60Hz power supply. It provides excellent attenuation for both common-mode and differential-mode conducted noise. Designed with low leakage current, high hi-pot strength and insulation resistance ≥100MΩ@500VDC, it operates stably within -25℃ to +100℃. This compact filter helps finished products meet EMC

Product Description: The EMC EMI Filter is a highly efficient EMI Interference Suppression Filter designed to protect electronic devices and systems from electromagnetic interference. This EMI Suppression Filter is engineered to ensure optimal performance in a variety of applications by effectively reducing unwanted noise and disturbances caused by electromagnetic interference. With its robust design and reliable specifications, the EMC EMI Filter is an ideal solution for

VIP1-1E-06 Single Phase EMI Power Filter 6A 250VAC VIIP VIP1-1E-06 B011X0412 EMI Power Line Filter with Fast-on Terminal Noise Suppressor. Certified with CQC, UL, TUV, CE, RoHS, REACH for EMC compliance. Product Overview The VIP1-1E-06 EMC EMI Filter is a high-performance power line filter designed to effectively suppress electromagnetic disturbances and ensure system reliability. Engineered for robust operation, it features a wide operating temperature range of -25℃ to +100℃

Product Brief V18017FJ amorphous toroidal core is made of 1K107B amorphous alloy material. It features high initial permeability high saturation magnetic flux density and low core loss. The magnetic core has stable magnetic performance within wide working temperature range from minus 50 to 150 degrees Celsius. Strict dimension tolerance and appearance inspection standards ensure consistent product quality. It can effectively suppress electromagnetic noise and help finished

Product Introduction VIP1-1B-03 is a single-phase 3A EMI power filter with rated voltage of 115/250VAC and 50/60Hz operating frequency. It is designed with ultra-low leakage current, with maximum leakage current of only 2uA at 115VAC/60Hz and 5uA at 250VAC/50Hz. This single-stage filter can work reliably within a wide temperature range of -25℃ to 100℃. It has passed strict 2000VAC line-to-ground hi-pot test and features insulation resistance over 100M ohm at 500VDC,

VIP4-2A-06(B042W0956) is a reliable single-phase AC EMI power filter with 6A RMS rated current and 115/250VAC rated voltage for 50/60Hz mains supply. Built with dual common-mode chokes and X/Y safety capacitor circuit, it achieves outstanding attenuation of high-frequency electromagnetic noise. This filter suppresses both common-mode and differential-mode conducted interference on AC lines, helping end devices pass EMC compliance tests such as EN55014 and GB9254. It features

Eco-Friendly RoHS REACH V180136H Ferrite Toroid Core, Industrial Grade EMI Noise Filter for Power Supply & Communication Devices V180136H Mn-Zn Ferrite Core, EMI RFI Noise Suppression Toroid Core, RoHS REACH Certified for EMC Filter Solution Product Overview The V180136H is a gap-free toroidal Mn-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, optimized for high-frequency EMC noise suppression. This high-performance soft-magnetic component