EMC EMI Filter

VIP5-4AG5-50-S(30004), is a heavy-duty industrial EMC power EMI filter with 50A rated current, engineered to curb conducted electromagnetic interference on power circuits. It supports 380/440VAC working voltage and fits 50/60Hz utility power networks. This filter achieves outstanding noise attenuation when tested in a standard 50-ohm setup. At 440VAC and 50Hz, its maximum earth leakage current per line caps at 3.2mA. Under 500VDC testing, the insulation resistance between

Product Description: The EMC ElectroMagnetic Interference Filter is a high-performance solution designed to effectively reduce electromagnetic interference in various electrical and electronic systems. This interference reduction filter is engineered to ensure optimal protection and enhanced performance of sensitive equipment by minimizing unwanted noise and disturbances caused by electromagnetic emissions. One of the standout features of this EMC ElectroMagnetic Interference

Product Introduction This toroidal magnetic core is produced from high‑performance VN02 soft magnetic material. It delivers stable initial permeability of 650 with ±20 percent tolerance, featuring low relative loss factor at 0.1MHz, high saturation magnetic flux density and superior electrical resistivity. The closed ring structure effectively reduces magnetic leakage. This core maintains steady magnetic properties across varying working temperatures, supporting long‑time

Product Description: The EMC EMI Filter is a highly efficient EMI Interference Suppression Filter designed to provide superior protection against electromagnetic interference in a wide range of electrical and electronic applications. Operating at a standard frequency of 50/60Hz, this filter is engineered to ensure stable and reliable performance, effectively minimizing unwanted noise and interference that can compromise the functionality of sensitive equipment. Its robust

Product Description: The EMC ElectroMagnetic Interference Filter is an essential component designed to enhance the performance and reliability of electronic devices by effectively suppressing unwanted electromagnetic interference (EMI). This EMI Suppression Filter is engineered to meet stringent industry standards, ensuring that electronic equipment can operate smoothly in environments with high levels of electrical noise and interference. With its robust design and high

VIP4-2A-06(B042W0956) is a single-phase AC power EMI filter rated for 6A RMS current and 115/250VAC voltage, compatible with standard 50/60Hz mains power. It adopts a dual-stage circuit built with twin common-mode chokes and safety X/Y capacitors. The filter delivers strong suppression of common-mode and differential-mode conducted noise on AC input lines, helping electronic devices pass EMC tests such as EN55014 and GB9254. It features low leakage current, insulation

Product Introduction VIP4-2B-10 is a single-phase PCB double-row pin EMI power filter manufactured by VIIP. It supports rated voltage of 115/250VAC and rated current up to 10A RMS, working at 50/60Hz. It delivers excellent common-mode insertion loss under the 50Ω system to suppress high-frequency power line noise. It features low leakage current, high insulation resistance and reliable hipot performance. The operating temperature covers -25℃ ~ +100℃. With through-hole double

Product Introduction V180220T toroidal magnetic ring is produced from VN02 soft manganese‑zinc ferrite material. It has an initial permeability of 650 with ±20% tolerance. At 0.1MHz, the relative loss factor is 20×10⁻⁶. Featuring curie temperature above 140℃ and high electrical resistivity, this core keeps stable magnetic performance under varying temperature conditions. Its compact toroidal structure delivers reliable EMI suppression capacity, serving as critical magnetic

VIP4-1A-06(10243) High Attenuation One Stage Common Mode Filter Low Leakage Current Power Line Noise Reducer Product Overview The EMC EMI Filter is a highly effective interference reduction filter designed to provide superior EMI suppression in a wide range of electrical and electronic applications. Engineered to meet stringent performance standards, this filter is ideal for reducing electromagnetic interference (EMI) and ensuring the smooth operation of sensitive equipment.

VIP1-1E-06 Single Phase EMI Power Filter 6A 250VAC VIIP VIP1-1E-06 B011X0412 EMI Power Line Filter with Fast-on Terminal Noise Suppressor. Certified with CQC, UL, TUV, CE, RoHS, REACH for EMC compliance. Product Overview The VIP1-1E-06 EMC EMI Filter is a high-performance power line filter designed to effectively suppress electromagnetic disturbances and ensure system reliability. Engineered for robust operation, it features a wide operating temperature range of -25℃ to +100℃

V180279H Mn-Zn Ferrite Core, EMI RFI Noise Suppression Toroid Core, RoHS REACH Certified for EMC Filter SolutionProduct OverviewThe V180279H is a toroidal gap-free Ni-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high-frequency noise suppression. This high-performance magnetic component effectively attenuates high-frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying with

VIIP V18029 Snap-on Ferrite Core With 6mm Cable Opening, EMC Noise Reduction Magnetic Core, Custom Ferrite Core Available Product Overview VIIP V18029 split clamp-style ferrite core is purpose-built for on-site EMC troubleshooting and noise suppression on pre-routed cables. Unlike solid toroidal cores requiring cable threading, this split ferrite design clamps directly onto finished wiring without cable disassembly or re-termination. Characterized by proven broadband

Product Brief V18007H is a Ni‑Zn ferrite core with VN02 material grade. Its physical dimension is outer diameter 3.5±0.3 mm, height 5.0±0.4 mm, inner diameter 1.8±0.3 mm. It has an initial permeability of 650. The minimum impedance reaches 20Ω at 25 MHz and 40Ω at 100 MHz. Featuring high resistivity, Curie temperature over 140℃ and stable magnetic performance, this component goes through strict visual defect inspection during production. It meets RoHS environmental standard,

Product Description: The EMC EMI Filter is a highly efficient EMI Interference Suppression Filter designed to provide superior performance in reducing electromagnetic disturbances in electrical and electronic systems. This filter is engineered to minimize the interference caused by electromagnetic noise, ensuring the smooth operation of sensitive equipment and enhancing overall system reliability. One of the key features of this Interference Reduction Filter is its impressive

VIP4-1A-06(10243) Compact Plug-and-Play Power EMI Filter Product Overview The EMC Electromagnetic Interference Filter is a highly reliable and efficient solution designed to protect electronic devices from unwanted electromagnetic disturbances. This EMI Suppression Filter ensures smooth operation of electrical and electronic equipment by minimizing noise generated by electromagnetic interference. With robust construction and superior performance, this filter is essential in

VIP1-1A-03 (10328) IEC Jack Electromagnetic Interference Absorber Product Overview The EMC EMI Filter is a highly efficient EMI Suppression Filter designed to provide superior protection against electromagnetic interference in a wide range of electrical and electronic applications. Engineered for optimal performance, reliability, and durability, this filter is essential for maintaining signal integrity and reducing noise in sensitive equipment. Key Features Product Name: EMC

VIP5-4AG5-50-S (30004) EMI Filter Product Overview The VIP5-4AG5-50-S with part number 30004 is a high-current industrial EMC EMI power filter, rated at 50A. It is designed to suppress conducted electromagnetic noise on power lines. This filter supports 380/440VAC rated voltage and works with 50/60Hz power systems. It delivers excellent noise attenuation performance under the standard 50-ohm test system. When operating at 440VAC and 50Hz, its maximum line-to-ground leakage

V180162T is a Mn‑Zn ferrite toroidal core made of VN02 grade material. Its initial permeability μi reaches 650. Mechanical dimensions: outer diameter 19.0±0.6 mm, height 11.0±0.6 mm, inner diameter 13.0±0.6 mm. Featuring low loss factor, high saturation magnetic flux density and high electrical resistivity, the component has a Curie temperature above 110 °C with stable temperature coefficient. Thanks to consistent batch tolerance and reliable anti‑interference capability, it

Factory V180136H Anti-Interference Ferrite Core, VN02 Toroid for Cable & Circuit EMI Suppression V180136H Mn-Zn Ferrite Core, EMI RFI Noise Suppression Toroid Core, RoHS REACH Certified for EMC Filter Solution Product Overview The V180136H is a gap-free toroidal Mn-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, optimized for high-frequency EMC noise suppression. This high-performance soft-magnetic component effectively suppresses high

Product Description V18050FJ is high‑performance 1K107B material soft ferrite toroidal core manufactured by VIIP. It features high initial permeability up to 80000, maximum permeability reaching 300000 and saturation magnetic flux density of 1250mT. With high electrical resistivity at 0.11Ω·m, it effectively suppresses eddy‑current loss. Operating temperature ranges from ‑50℃ to 150℃, Curie temperature 570℃ for reliable high‑temperature performance. Strict visual defect