EMC EMI Filter

V180279H Mn-Zn Ferrite Core, EMI RFI Noise Suppression Toroid Core, RoHS REACH Certified for EMC Filter Solution Product Overview The V180279H is a toroidal gap-free Ni-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high-frequency noise suppression. This high-performance magnetic component effectively attenuates high-frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying

V18033H EMI Suppression Ferrite Core 6080024125 High Freq Noise Filter for Consumer Electronics PCBA Power Cables RoHS REACH Product Overview The V18033H is a toroidal gap-free Ni-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high-frequency noise suppression. This high-performance magnetic component effectively attenuates high-frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully

1. Product Brief Manufactured with VN09 grade nickel‑zinc soft ferrite, the V18031 ring‑shaped ferrite core features an initial permeability of 850 and low loss performance. It achieves remarkable high‑frequency noise damping and electromagnetic interference mitigation effects. Rigorous size control ensures uniform performance from batch to batch, perfectly fitting mass production assembly operations. Featuring superior resistivity and great thermal tolerance, this core keeps

Product Description Produced by VIIP, the V18050FJ is a premium toroidal soft ferrite core made from grade 1K107B material. It boasts an initial permeability of 80000, alongside a maximum permeability of 300000 and saturation magnetic flux density of 1250 mT. Its high electrical resistivity of 0.11 Ω·m greatly mitigates eddy‑current losses. It operates reliably from ‑50℃ to 150℃ with a Curie temperature of 570℃ to deliver dependable high‑temperature performance. Rigorous

Product Brief This AC inlet socket is a power‑input female connector designed for mounting on equipment housings. It connects with power cords to supply power for electronic devices. Constructed with high‑temperature resistant insulating material and robust conductive terminals, it delivers steady current transmission. Every unit undergoes strict pre‑delivery quality checks to ensure safe and dependable connection. Its compact structure saves mounting space and facilitates

Product Introduction VIP4-2B-10 is a single-phase PCB double-row pin EMI power filter with 10A rating, developed for low-voltage electronic hardware. With rated voltage of 115/250VAC and operating frequency of 50/60Hz, it can efficiently curb high-frequency common-mode and differential-mode noise transmitted over power cables. Equipped with space-saving through-hole pins, low leakage current, strong insulation and wide temperature tolerance, this filter delivers clean,

Product Description: The EMC ElectroMagnetic Interference Filter is a highly efficient EMI Suppression Filter designed to provide superior protection against unwanted electromagnetic interference in various electrical and electronic applications. This filter is engineered to enhance the performance and reliability of devices by minimizing the noise and disturbances caused by electromagnetic interference, ensuring smooth and stable operation under different environmental co

Ni‑Zn H‑Type Ferrite Core V18033H High Impedance EMC EMI Noise Suppression for PCBA Wiring Harness Product Overview The V18033H is a toroidal gap‑free Ni‑Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high‑frequency noise suppression. This high‑performance magnetic component effectively attenuates high‑frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying with RoHS & REACH

Product Description: This toroidal ferrite magnetic ring is manufactured from premium VN02 manganese‑zinc soft ferrite material, with initial permeability of 650±20%. It features saturation magnetic flux density of 260 MT at 1600A/m, Curie temperature above 140℃ and high electrical resistivity over 10⁵ Ω·m. The relative loss factor is 20 under 0.1 MHz working condition, together with low temperature coefficient ranging from 2‑5 ×10⁻⁶, delivering stable magnetic performance

Factory Supply V18038 Soft Ferrite Core 26mm, High Impedance EMC EMI Noise Filter Magnetic Core, RoHS & REACH Certified Product Overview VIIP V18038 split clamp-style ferrite core is purpose-built for on-site EMC troubleshooting and noise suppression on pre-routed large-size cables. Unlike solid toroidal cores requiring cable threading, this split ferrite design clamps directly onto finished wiring without cable disassembly or re-termination. Characterized by proven broadband

Product Description: The EMC EMI Filter is a high-performance Interference Reduction Filter designed to effectively suppress electromagnetic interference (EMI) in a wide range of electrical and electronic applications. With a current rating of 10A RMS max and a voltage rating of 115/250VAC, this filter ensures reliable operation under standard power conditions, making it suitable for both residential and industrial environments. Its robust design supports a line-to-line

Product Introduction V18001A is a snap-on NiZn ferrite magnetic ring developed by VIIP, adopting VN09 ferrite material. Its plastic housing reaches UL94-V2 flame retardant grade. It delivers impedance of minimum 85Ω at 25MHz and minimum 175Ω at 100MHz, offering excellent suppression for high-frequency EMI and RFI noise. The clip structure enables quick installation on finished cables without rewiring. Strict appearance inspection and consistent component performance help

Product Introduction VIP1-1B-03 is a single-phase 3A EMI power filter with rated voltage of 115/250VAC and working frequency of 50/60Hz. It features ultra-low leakage current, and can work steadily within the temperature range from -25℃ to 100℃. This single-stage filter effectively suppresses common-mode and differential-mode electromagnetic interference on power lines. It has passed strict high voltage withstand and insulation resistance tests to deliver safe and reliable

Product Brief Introduction VIP4-1A-10 is a high performance single phase EMI power filter with 10A rated current for AC power line noise suppression. It supports 115VAC and 250VAC input and works under 50Hz and 60Hz power frequency. With single stage LC filtering structure it can effectively reduce common mode electromagnetic noise on power lines. It provides clean power for electronic equipment and improves system anti interference capability. It features reliable electrical

V180279H Mn-Zn Ferrite Core, EMI RFI Noise Suppression Toroid Core, RoHS REACH Certified for EMC Filter Solution Product Overview The V180279H is a toroidal gap-free Ni-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high-frequency noise suppression. This high-performance magnetic component effectively attenuates high-frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying

1. Product Brief The V18031 toroidal ferrite magnetic core is built from VN09‑grade nickel‑zinc soft ferrite. Boasting 850 initial permeability and low loss coefficient, this component delivers excellent high‑frequency noise attenuation and EMI interference reduction. Tight dimensional tolerance maintains consistent performance across different batches, ideal for large‑scale assembly work. Thanks to high resistivity and broad temperature adaptability, it sustains reliable

VIIP V19002 ID17mm High Impedance Ferrite Ring, EMI RFI Soft Toroid for Power & Signal Cable EMC Filtering RoHS REACH Compliant Product Overview VIIP V19002 17mm Anti-Interference Ferrite Toroid Ring - RoHS REACH compliant industrial cable interference solution. This toroidal ferrite core delivers powerful EMI and RFI noise attenuation for high-frequency circuits. Product Description Fabricated from high-grade VN09 nickel-zinc ferrite, the black V19002 toroidal ferrite core

Product Description V18007H is a high‑frequency Ni Zn ferrite core built on VN02 material formulation. Key mechanical specifications cover outer diameter 3.5±0.3 mm, inner diameter 1.8±0.3 mm and height 5.0±0.4 mm. This component comes with low‑field permeability rated at 650. It presents minimum impedance reading of 20Ω at 25 MHz and 40Ω at 100 MHz for effective high‑frequency noise attenuation. Boasting superior electrical resistivity alongside Curie temperature exceeding

Product Brief VIP4‑1A‑06(10243) is a general‑purpose single‑phase one‑stage common‑mode AC power filter. It is rated 115/250VAC, 6A RMS Max with 50/60Hz operating frequency. It delivers excellent common‑mode and differential‑mode noise attenuation covering 150kHz‑30MHz under 50‑ohm test system. It features 0.3mA max leakage current @115VAC/60Hz and 0.6mA max @250VAC/50Hz. It passes 2000VAC line‑to‑ground and 1450VDC line‑to‑line hi‑pot test for one minute, insulation

EMI Power Line Filter VIP1-1A-06 (B011X1222) VIP1-1A-06 (B011X1222) single-stage IEC inlet EMI power filter is launched by VIIP WEIAIPU. Combined with standard IEC C14 socket, it can be mounted directly on equipment panel to restrain conducted electromagnetic interference of AC power line. Key Electrical Specifications Rated Voltage 115/250 VAC Rated Current 6A RMS Max Operating Frequency 50/60 Hz Maximum Leakage Current 0.3mA @115VAC / 0.6mA @250VAC Hi-pot Test Line to