Molybdenum Tungsten Alloy

25%W Tungste Molybdenum Alloy Disc Diameter 200mm 1. Description of 25%W Tungsten Molybdenum Alloy Disc Diameter 200mm: When 25% tungsten is added to W-Mo alloy, the melting point of the alloy increases by about 200℃. Therefore, this series of alloys is of great significance. It is well known that the W-Mo system is a continuous solid solution; adding no more than 10% tungsten to molybdenum has little effect on the behavior of the metal during ingot smelting and hot

50%Mo Molybdenum Tungsten Alloy Plate For High Temperature Parts 1. Description of 50%Mo Molybdenum Tungsten Alloy Plate For High Temperature Parts: Molybdenum-tungsten alloy plate is the most commonly produced product among molybdenum-tungsten products. Because molybdenum-tungsten alloy has good high temperature performance, good thermal conductivity, electrical conductivity, low thermal expansion coefficient and high temperature strength, most of them are used in electronic

Tungsten Molybdenum Alloy Energized Electrodes For TIG Welding Machine 1. Description of Tungsten Molybdenum Alloy Energized Electrodes For TIG Welding Machine: Tungsten molybdenum electrodes are made of tungsten and molybdenum and are produced using the same processes as those used to make molybdenum and molybdenum alloys. This allows us to produce electrodes in a variety of shapes, including rods, plates, wire, and other custom designs. Low thermal expansion coefficient,

50%W High Strength Tungsten Molybdenum Alloy Bar 1. Product Description of High Strength Metal Alloys Bar Molybdenum 50%W Polished Surface: Tungsten-molybdenum alloy rods can be used as high-temperature components in rockets, missiles, filaments, parts and other high-temperature materials under corresponding high-temperature conditions due to their good high-temperature strength, similar properties to tungsten and smaller specific gravity than tungsten. 2. Size of High

30%W Tungsten Molybdenum Alloy Rod Diameter 30mm 1. Material description of 30%W Tungsten Molybdenum Alloy Rod Diameter 30m: Tungsten-molybdenum alloy has the common characteristics of tungsten and molybdenum metal, and has good high temperature stability, resistivity and good processing performance under vacuum or inert gas protection. 2. Size of 30%W Tungsten Molybdenum Alloy Rod Diameter 30m: Diameter 5~150mm Length

W30% Tungsten Molybdenum Alloy Disc 1. Specification of Tungsten Molybdenum Alloy Disc: An alloy made of tungsten and molybdenum is referred to as tungsten-molybdenum alloy. The tungsten content of commonly used tungsten-molybdenum alloys is 30% to 50% (mass). The procedure used to prepare tungsten-molybdenum alloys, which can be used to create rods, plates, wires, and other shapes, is the same as the one used to prepare metal molybdenum and metal molybdenum alloys. W-Mo