TZM Molybdenum Alloy

TZM Molybdenum Alloy Plate Targer For Semiconductor 1. Description of TZM Molybdenum Alloy Plate Targer For Semiconductor: The surface of TZM molybdenum alloy plate target is silver gray with metallic luster, which is widely used in mold and parts furnace construction, component manufacturing in electronic and semiconductor industries. Vacuum furnace and high temperature furnace and plate electrodes of thermal insulation materials and other industries. Thickness 5~80mm Width

Titanium Zirconium Molybdenum Alloy Bolt Molybdenum Screw 1. Description of Titanium Zirconium Molybdenum Alloy Bolt Molybdenum Screw: Titanium zirconium molybdenum alloy screw (TZM screw) is a TZM alloy special-shaped product, which is produced by powder metallurgy with a purity level of over 99.5%. Its shape is similar to ordinary screw, it has good high temperature performance and corrosion resistance, and it is often used in conjunction with TZM nut. 2. Size and Standard

Product Description: Titanium zirconium molybdenum rod (TZM rod) is prepared by powder metallurgy. TZM rod is a high-temperature alloy commonly used in molybdenum-based alloys. Its composition is 0.50% titanium, 0.08% zirconium, and the rest 0.02% carbon molybdenum alloy. It has good high temperature performance, mechanical properties and other good properties, including: high melting point, high strength, high elastic modulus, small linear expansion coefficient, low vapor

Product Description: TZM alloy plate is a flat material made of molybdenum hafnium titanium alloy, which is composed of molybdenum, zirconium and titanium. Typical composition ratios are: molybdenum is about 85-99%, Ti is about 0.5%, and zirconium is about 0.08. Manufacturing process: TZM alloy plate is manufactured by hot working, hot rolling or cold rolling. Thickness < 0.15 mm 0.20 mm 0.25-0.4 mm 0.5-2.0 mm 2.5-3.5 mm Max size 200x1000 mm 500x1500 mm 700x3000 mm 700x1500

Product Description: TZM molybdenum alloy wire is composed of molybdenum, zirconium and titanium. The typical composition ratio is about 85-99% molybdenum, about 0.5% titanium, about 0.08% zirconium. Comparison of physical properties between TZM alloy wire (molybdenum-zirconium-titanium alloy) and pure molybdenum: Material Desnity /g·cm-3 Melting Point /℃ Boiling point/℃ TZM alloy (Ti0.5/Zr0.08) 10.22 2617 4612 Pure Mo 10.29 2610 5560 Mechanical Properties of TZM Alloy Wire:

Product Description: Titanium zirconium molybdenum tubes (TZM tubes) have good properties similar to TZM alloys, such as high melting point, high strength, high temperature resistance, corrosion resistance, etc., and are widely used in electronic tubes for application components, heating high temperature furnaces, and thermocouple protection in high temperature furnaces tube and other fields. High Temperature Tensile Strength and Elongation of TZM Alloy (Molybdenum Zirconium

Product Description: Titanium zirconium molybdenum strip foil has higher recrystallization temperature, high temperature creep strength and high temperature tensile strength than pure molybdenum. TZM strip foil is widely used in lighting and electric vacuum devices, power semiconductor devices, heat shields, molybdenum sputtering targets, molybdenum boats, etc. due to its good high temperature characteristics and corrosion resistance. pure Molybdenum strip in coil density: 10

High temperature resistant utensils tzm material metal alloy box molybdenum boat 1. Information of utensils tzm metal alloy box/boat: TZM molybdenum boat is a special molybdenum alloy boat, which is composed of molybdenum (Mo), titanium (Ti), zirconium (Zr) and trace carbon (C) elements. It has excellent high-temperature performance and chemical stability, and is widely used in high-temperature vacuum furnaces, crystal growth, heat treatment and other high-temperature

tzm material metal alloy rod titanium zirconium molybdenum bar 1. Description of tzm alloy polished rod/bar: Molybdenum, zirconium, and titanium are all constituents of the superalloy material known as TZM molybdenum alloy round rod. It is frequently used in high-temperature industries including aerospace, nuclear energy, electronics, and other disciplines because of its excellent high-temperature mechanical qualities, high-temperature creep resistance, and corrosion

material tzm alloy price titanium zirconium molybdenum mirror sheet 1. Information of tzm alloy price titanium zirconium molybdenum mirror sheet: The surface of TZM molybdenum alloy plate target is mirror surface, which is widely utilized in component manufacture in the semiconductor and electronic sectors as well as mold and part furnace building. Plate electrodes of thermal insulating materials, high temperature furnaces, vacuum furnaces, and other industries. Size: 2.0*700

TZM Alloy Rod High Temperature Furnace Heating Device 1. Introduction Of TZM Alloy: TZM alloy has the characteristics of high melting point, high strength, high elastic modulus, small linear expansion coefficient, low vapor pressure, good electrical and thermal conductivity, strong corrosion resistance and good high-temperature mechanical properties, so it can be widely used in many fields. TZM alloy rods usually have a diameter of 2mm-100mm and a length of 1000mm-2000mm.

Process Machined Parts TZM Alloy Custom Shaped Parts TZM Molybdenum Alloy 1. Introduction Of TZM Alloy Custom Shaped Parts: TZM alloy is a high-temperature alloy composed of three elements: tungsten (W), molybdenum (Mo) and titanium (Ti), so it is also called tungsten-molybdenum-titanium alloy. Due to its excellent high temperature performance and mechanical properties, TZM alloy is widely used in aerospace, nuclear energy, shipbuilding, chemical industry, electronics and

Diameter 8mm,10mm,15mm TZM Alloy Molybdenum Rod Bar Polished Surface 1. Information Of TZM Alloy Molybdenum Rod: TZM molybdenum alloy round rod is a superalloy material composed of elements such as molybdenum, zirconium and titanium. It has excellent high-temperature mechanical properties, high-temperature creep resistance and corrosion resistance, so it is widely used in high-temperature fields, such as aerospace, nuclear energy, electronics and other fields. The following

4mm Thickness TZM molybdenum Alloy Plate ASTM B386 1.Description Of TZM Molybdenum Alloy Plate: TZM molybdenum alloy plate is a high-performance metal material, which is composed of alloys of molybdenum, zirconium and titanium. It has the characteristics of extremely high corrosion resistance, high temperature strength, good oxidation resistance and low thermal expansion coefficient, so it is widely used in harsh environments such as high temperature, high pressure and strong

TZM Molybdenum Alloy Top Head For Perforation 1. Description Of TZM Molybdenum Alloy Top Head For Perforation: The head of the mandrel for the seamless steel pipe is formed of the molybdenum top head, an alloy of molybdenum, titanium, zirconium, and carbon. The molybdenum alloy plug is made of molybdenum powder FMo-1 raw material added with rare earth materials, and is processed through mixing, forming, shape processing, high temperature sintering and other processes. The

TZM Titanium Zirconium Molybdenum Alloy Threaded Rod 1. TZM Titanium Zirconium Molybdenum Alloy Threaded Rod Specifications: The titanium zirconium molybdenum threaded rod (TZM screw) is a special-shaped product made from TZM alloy with a purity level of above 99.5% and is created via powder metallurgy. Its shape is similar to ordinary screw, it has good high temperature performance and corrosion resistance, and it is often used in conjunction with TZM nut. Mo threaded rod

TZM Molybdenum Alloy Tray 1. Description Of TZM Molybdenum Alloy Tray: TZM alloy has high temperature resistance, high strength, high melting point, high elastic modulus, small linear expansion coefficient, strong corrosion resistance and good electrical and thermal conductivity, so it is widely used in various applications. TZM alloys are also often prepared into tray for the production of molybdenum powder. Molybdenum powder should be produced in a high temperature

TZM Alloy Plate Prepared By Powder Metallurgy 1. Description Of TZM Alloy Plate Prepared By Powder Metallurgy: The best molybdenum alloy is TZM. This alloy contains not less than 99.2% molybdenum, up to 99.5%, 0.50% titanium, 0.08% zirconium and Mo-Hf-C alloys strengthened by hafnium carbide particle precipitation. At temperatures above 1300°C, TZM is twice as strong as pure molybdenum. The recrystallization temperature of TZM is about 250'C higher than that of molybdenum,

TZM Molybdenum Top Head For Perforation 1. TZM Molybdenum Top Head For Perforation Specifications: TZM molybdenum top head is a molybdenum alloy made of molybdenum titanium zirconium alloy for the production of seamless steel pipe mandrel head. The molybdenum alloy plug is made of molybdenum powder FMo-1 raw material added with rare earth material, and is processed through mixing, forming, shape processing, high temperature sintering and other processes. The final item has a

TZM Alloy Molybdenum Top Head 1. TZM Alloy Molybdenum Top Head description: The head of the mandrel for the seamless steel pipe is formed of the molybdenum top head, an alloy of molybdenum, titanium, zirconium, and carbon. Stainless steel, brazing steel, high temperature alloy steel, molybdenum, and other specialty parts are suitable for perforated seamless steel pipes. 2. Size of TZM Alloy Molybdenum Top Head: Type Diameter(mm) Tolerance of Diameter(mm) Length(mm) Tolerance