Molybdenum Parts

Silicon Molybdenum Rod Heating Element 1. Silicon Molybdenum Rod Heating Element Description: Molybdenum disilicide-based silicon molybdenum rod resistive heating element is a high temperature and oxidation-resistant resistance heating element.When used in a high temperature oxidizing atmosphere, like other Si-based high temperature resistant materials, a bright and dense quartz (SiO2) glass film will rapidly form on the surface of MoSi2 under high temperature and oxygen

Product Description: Silicon carbide rod is a kind of non-metal electric heating element, which is made of silicon carbide as the main raw material, processed according to a certain material ratio, and processed by silicification, hardening and calcination at a high temperature of 2200 ℃. Silicon carbide rods have a large resistivity, and when the surface temperature of the heating part in the air is 1100°C, the resistance of the silicon carbide rods changes nonlinearly with

Molybdenum Disilicide Heater Moly Disilicide Heat Element 1. Information of Molybdenum Disilicide Heater Moly Disilicide Heat Element: Molybdenum Disilicide Heater (Molybdenum Disilicide Heater) is a high temperature heating element made of molybdenum disilicide material. It has many unique features and properties and is suitable for various applications of high temperature heating. 2. Parameter of Molybdenum Disilicide Heater Moly Disilicide Heat Element: Temperature range:

Molybdenum Heat Element For Hot Zones 1. Description Of Molybdenum Heat Element For Hot Zones: The commonly used models of molybdenum heating element are molybdenum wire heating element and molybdenum rod heating element. There are two types of molybdenum wire heating elements: one-section and two-section. They are constructed from many strands of molybdenum alloy wire. The molybdenum rod heating element is made of pure molybdenum rods with a diameter of 5-16mm and a content

Chemical Properties And Applications Of Molybdenum Target 1.Chemical Properties Of Molybdenum Target: The chemical properties of molybdenum targets are relatively stable. At room temperature, it is stable in air or water, but slight oxidation occurs when the temperature reaches 400 °C, and violent oxidation occurs when the temperature reaches 600 °C to form MoO3. Hydrochloric acid, hydrofluoric acid, dilute nitric acid and alkaline solutions do not react with the target, but

Customized High Precision Molybdenum Parts for High Temperature Applications Molybdenum has the characteristics of high strength, high hardness, and excellent mechanical properties, and it can still maintain high strength and hardness at high temperatures. Molybdenum is mainly used in steelmaking. Alloy steel mixed with molybdenum has high strength, high toughness, outstanding heat resistance and corrosion resistance. Metal molybdenum is widely used in electronic devices such

High Temperature Molybdenum Tube Precision Parts Processed Molybdenum Parts We can process any shape molybdenum parts according to drawing. Small tolerances and high precision. Molybdenum parts Density: 10.2g/cm3 Purity: 99.95%~99.97% Surface: Polished Roughness: Ra0.8-Ra1.6 MOQ:1pc We are a manufacturer of molybdenum ,tungsten ,tantalum ,niobium,zirconium products in China, In addition to conventional products, such as plates, rods, wires, tubes, foils, etc., we can also

Product Description: Silicon-molybdenum rod resistive heating element is a high-temperature-resistant and oxidation-resistant resistance heating element based on molybdenum disilicide. When used in a high-temperature oxidizing atmosphere, a bright and dense quartz (SiO2) glass film is formed on the surface, which can protect the inner layer of the silicon-molybdenum rod from oxidation, so the silicon-molybdenum rod element has unique high-temperature oxidation resistance. Our

Product Description: Silicon-molybdenum rods have high oxidation resistance. In a high-temperature atmosphere, a dense quartz SIO2 protective layer is formed on the surface of the original to prevent MOSI2 from continuing to oxidize. When the temperature of the element is higher than 1700 ℃ and the SIO2 protective layer with a melting point of 1710 ℃ melts, due to the effect of surface tension, the SIO2 melts into droplets and loses its protective effect. When the component

Product Description: High-temperature heating element MoSi2 heating rod is a resistance heating element that works at high temperature, and is often called a high-temperature molybdenum silicon rod. It has many good properties. High-temperature oxidation resistance. In a high-temperature oxidizing atmosphere, a dense quartz glass protective film will be formed on the surface. The protective film can protect the substrate of the heating rod, and this protective film has the

Product Description: Silicon-molybdenum rods and silicon-carbon rods are both resistive heating elements, and are high temperature, corrosion-resistant and oxidation-resistant, and are often used in the preparation of ceramics, magnetic materials, refractory materials and new materials. The difference between silicon molybdenum rod MoSi2 and silicon carbide SiC rod: Difference between silicon molybdenum rod MoSi2 and silicon carbide SiC rod MoSi2 heating rod SiC heating rod

Product Description: The crystal of molybdenum disilicide (MoSi2) has a tetragonal structure. It is an intermediate phase with the highest silicon content in the Mo-Si binary alloy system. It is a Dalton intermetallic compound with a fixed composition. It is gray and has a metallic luster. It has good electrical and thermal conductivity, excellent mechanical properties and high temperature oxidation resistance, and can be used as a heating element with performance exceeding

Product Description: Molybdenum Products are made of high purity molybdenum materials with 99.95% purity. These products are known for its excellent thermal properties, enabling them to have a boiling point of 5560°C and a density of 10.2 g/cm3. The atomic radius of these products is 139 pm. The products are used in various industries for a variety of applications due to their corrosion resistance, high temperature resistance, and superior electrical conductivity. Molybdenum

Product Description: Molybdenum silicide (MoSi2) is a ceramic material with a high melting point (about 2620 degrees Celsius) and good electrical conductivity. Molybdenum silicide heating elements are usually made of molybdenum silicide material, which can be prepared by powder metallurgy process or chemical vapor deposition (CVD) method. They are usually in rod or tubular form and have the appropriate electrical resistance properties to provide the desired heating effect.

Molybdenum Heating Elements For High Temperature Furnaces Special-Shaped Mo Parts 1. Profile Of Mo Special-Shaped Parts: Molybdenum heating element for high temperature furnace is a heating device that works in high temperature environment, usually used to manufacture high temperature equipment such as high temperature vacuum furnace, atmosphere furnace, resistance furnace, electric arc furnace, etc. Process according to customer's drawing. 2. Performance parameters Of Mo

Molybdenum Rod Molybdenum Stirring Rod Is Used In Rare Earth Smelting Industry 1. Introduction Of Molybdenum Rod Mo Stirring Rod: The molybdenum stirring rod used in the rare earth industry is usually made of high-purity molybdenum material, which has good high temperature corrosion resistance and mechanical strength. Its structure is mainly composed of a steel bottom and a molybdenum stirring rod, which are connected by a special connection method to ensure the overall

Molybdenum Nuts Screw High Temperature Furnace Single Crystal Furnace Heating Parts 1.Description Of Molybdenum Nuts Screws: Molybdenum nut is a special nut made of molybdenum material. Compared with ordinary nuts, it has higher strength, better corrosion resistance and higher heat resistance. The specifications and dimensions of molybdenum nuts mainly include diameter and pitch. Commonly used diameter specifications are M3, M4, M5, M6, M8, etc.; commonly used pitch

Molybdenum Bolt Length 1000mm Molybdenum Threaded Rod Vacuum Furnace Parts 1. Information Of Molybdenum Bolt Mo Threaded Rod: Molybdenum screw is a high-performance alloy material, its main component is molybdenum, and it also contains a small amount of other metal elements, such as niobium and titanium. Molybdenum screw has excellent high temperature resistance, corrosion resistance, excellent mechanical properties and dimensional stability. It is widely used in many

Molybdenum Rod Support Frame Column For Crystal Growth Furnace 1. Molybdenum Rod Support Frame Column For Crystal Growth Furnace: Mo support frame (Column) Size: φ100*φ32mm*297mm φ8*φ3mm*40mm Grade: Mo1,TZM,Mo-LaPurity: 99.95%,99.97%Surface: polised We also process according to customer’s drawings. 2. Physical and Chemical Properties of Molybdenum Rod Support Frame Column For Crystal Growth Furnace: Product name:Mo support frameTensile strength610 MpaElongation≥10%Purity≥99

Planar Molybdenum Plate Target 1. Description Of Planar Molybdenum Plate Target: Planar molybdenum targets mainly refer to circular targets and rectangular targets with a certain thickness. The flat target is connected to the sputtering equipment by means of threads, etc., and the film-forming layer is attached to the substrate by sputtering under vacuum conditions, and after that, the film is altered (via etching) in order to suit varied demands. 2. Size Of Planar Molybdenum