Gas Sensor

G7L SF6 Sensor Based On Non Dispersive Infrared (NDIR) Technology Specifically Designed For SF6 Gas Detection Key Features: Superior Selectivity and Anti - Interference Performance: It is specifically designed for SF6 gas leak detection and has strong gas selectivity. It will not be interfered by common gases such as water vapor (H2O), alcohol and carbon dioxide (CO2), which ensures the accuracy of detection data in complex environmental conditions. Stable and Reliable

DS4-ETO Ethylene Oxide Digital Gas Sensor Low Power Consumption The DS4 Digital Gas Sensor is engineered with cutting-edge features in a standard sized housing to ensure high performance and seamless integration into various systems. Low Power Consumption, Sleep Mode & Wide Power Supply Range – Operates efficiently within a 3.3V to 12V DC range (recommended 5V). Users can customize sleep and wake-up modes. nA power consumption, therefore, suitable for low-power battery or IoT

G7L SF6 NDIR Gas Measurement Sensor Small Size Environmental Testing Applications * Environmental monitoring * Gas leak prevention * Online monitoring * Gas composition analysis Advantages and Features * Non-dispersive infrared (NDIR) technology * Temperature compensation * Long lifespan and maintenance-free operation * Compact size, easy system integration Basic performance Response time (T90) ≤25s Resolution 1ppm Repeatability ≤±1.5%FS Operating temperature -20℃ ~ 40℃

PGM-1600 Portable 3 - in - 1 Flammable Gas/Oxygen/Toxic Gas Detector For Industrial Safety Monitoring Key Functional Features: Flexible Data Management: It adopts SD card for data storage, and the data is saved in Excel format for easy post - processing and analysis. The sampling interval can be adjusted from 1 to 3600 seconds, and data can be downloaded via SD card reader, USB (through the base) or RS232 (through the travel charger). Multi - dimensional Alarm System: It is

0393 0152 Low-Range Nitrogen Oxide (NOlow) Replacement Sensor Specialized For Flue Gas Measurement Key Product Advantages: Hassle - free On - site Replacement: The sensor adopts a plug - and - play design. Users can complete the replacement operation by themselves on site without relying on professional maintenance teams. This significantly shortens the downtime of the flue gas analyzer and improves the efficiency of equipment maintenance. Ready - to - use with Factory Pre -

0393 0102 Hydrogen - Compensated Low - Range Carbon Monoxide Replacement Sensor For Specific Flue Gas Analyzers And Widely Used In Industrial Combustion And Flue Gas Detection Scenarios Key Product Advantages: Pre - calibrated and Plug - and - Play: The sensor is pre - calibrated at the factory, and its adjustment data is stored inside. When replacing, users do not need to perform tedious on - site calibration operations. It can be put into use immediately after being

PGM-1600 Three In One Gas Detector Electrochemical Oxygen Poison Gas MOS Sensor Key Features * Supports multiple sensors * Automatically switches based on gas concentration, achieving full coverage from ppm to LEL to VOL * Can be connected to sampling pipelines up to 30m long, ensuring equally accurate data * Large-screen graphic LCD display, multilingual, including Chinese * Built-in gas database for user convenience and more accurate results * Data storage via SD card in

0393 0250 Sulfur Dioxide Gas Sensor For Dry Flue Gas Measurement Key Product Features: On-site Easy Replacement: The sensor supports plug - and - play installation. Users can replace it by themselves on site without relying on professional maintenance personnel. This greatly shortens the downtime of flue gas analysis equipment during maintenance. Pre - calibrated for Ready - to - use: It comes pre - calibrated from the factory. After being installed on the compatible testo

FS02102 Sulfur Hexafluoride Gas Sensor NDIR High Sensitivity The FS02102 sulfur hexafluoride sensor employs a unique light-cell-free NDIR technology: Equipped with an aluminum alloy housing, it features digital output, resistance to interference from other gases, eliminates the need for a gas pump or piping, is compact, has a robust and corrosion-resistant housing, is easy to use and maintain, and is adaptable to harsh environments. It is suitable for applications such as

OOM113 Medical Oxygen Sensor For Measuring Oxygen Concentration In Breathing Gas Mixtures Widely Used In Medical Devices General Description: The OOM113-M is a high-precision medical oxygen sensor engineered for monitoring oxygen levels in breathing gas mixtures. It adheres to strict medical standards such as EU MDD, RoHS, and ISO 80601 - 2 - 55, and is manufactured in accordance with the EN ISO 13485 quality management system. This sensor is a key component of oxygen

HCN-A1 Electrochemical Hydrogen Cyanide (HCN) Gas Sensor Widely For Toxic HCN Detection In Industrial Safety Scenarios Description: The HCN-A1 is an electrochemical gas sensor dedicated to the accurate detection of hydrogen cyanide (HCN) — a highly toxic gas. It operates based on the electrochemical reaction of HCN at the internal working electrode, where the generated current is linearly proportional to the target gas concentration (following Faraday’s Law). This sensor

Photoion Gas Sensor PID-TECH 045-010 for Industrial Safety Environmental Monitoring Features: Intrinsically safe, certified by UL, CAN/CSA, ATEX, and IECEx, requiring no external protection circuitry. Equipped with a lamp re - ignition circuit for fast and repeatable start - up, and the lamp has a long service life of typically 10,000 hours. Built - in input voltage regulation for enhanced signal stability, and internal filtration to protect against particulates and humidity.

0390 0070 oxygen sensor Basic Information : Model: 0390 0070 Type: Oxygen sensor, used to measure oxygen content in the environment. Application Range: Suitable for Testo 300, 335, and 350 series devices as their oxygen measurement unit. Dimensions and Weight: Dimensions: Reported dimensions vary slightly: 40×40×40mm or 50×40×20cm (likely due to different models/versions). Weight: Approximately 2000 - 3000g. Functional Features: High-Precision Measurement Accurately measures

4O2-GP Electrochemical Oxygen Gas Sensor P/N 114-230-350 For Most Life Safety DetectorSystems Product Applications: Life Safety Detection Systems Integrated into portable and fixed life safety detectors for enclosed spaces (e.g., underground workshops, confined equipment compartments, mine tunnels) to monitor real-time oxygen concentration, preventing hypoxia-related accidents and ensuring personnel safety. Deployed in emergency rescue gear and safety monitoring kits for fire

JXRN-M10 Radon Gas Sensor Module Is Used In Air Purifiers And Automatic Ventilation Systems Among Other Applications Application Scope: The detection process is less affected by the environment and has strong anti-interference ability. It is widely used in indoor air monitors, air purifiers, automatic ventilation systems and other scenarios. Product Features: Small: Compact size, easy to install High: High precision, high sensitivity Strong: Strong anti-interference ability

MMD1007E Module Industrial Grade Electrochemical Hydrogen Sulfide Sensor For H2S Odor Gas Detection Product Features: Outstanding Detection Performance: Adopting electrochemical detection principles, it boasts excellent selectivity for hydrogen sulfide, which enables it to accurately detect the target gas without being easily interfered by other gases in the air. With a resolution of 30 ppb, it can capture trace amounts of hydrogen sulfide, ensuring precise monitoring results

0393 0104 Carbon Monoxide Gas Sensor Mainly Used In Industrial Fields Such As Smoke Analysis And Environmental Monitoring Key Product Advantages: Reliable Compatibility: It is specially customized for testo 350 series flue gas analyzers. The size and electrical parameters are perfectly matched with the equipment, enabling seamless connection without additional adaptation operations. Hydrogen Interference Resistance: The integrated hydrogen compensation technology makes it

Product Description: YJJ JXRN-M10 Radon Gas Sensor Module Offers Multiple Measurement Ranges For Selection Features: Radon gas sensor module is a standardized and modular gas detection product independently developed and produced by our company. By using our company's radon gas sensor module, we can quickly respond to customers' demands for radon gas detection. Moreover, the production process is simplified, allowing for immediate purchase and use without the need for re

Product Description: SRX-MA333 Electrochemical Micro-Oxygen Sensor Is Used Industries Medical Fields Semiconductors And Other Areas Features: AST oxygen sensors SRX-MA333 and SRZ-MA333 produced by the United States are micro-oxygen sensors that are manufactured based on the dimensions of the oxygen sensors GPR-12-333 and XLT-12-333 produced by the American AII company. They can measure the oxygen concentration ranging from 0 to 10,000 PPM. Core parameters Measurement range: 0

Product Description: YJJ H2S 2000 AN062000 0-2000PPM Gas Sensor Is A Device Used For Detecting Concentration Of Hydrogen Sulfide (H2S) Gas Features: Poisoning Sensorix cells are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapors is avoided, both during storage, fitting into instruments, and operation. When using sensors with printed circuit boards (PCBs), degreasing