Ultem PEI Resin

S-Plastic Ultem 1100V resin is Transparent, standard flow Polyimide (Tg 217C). ECO Conforming, UL94 VO and 5VA listing; color dependant, see UL Yellow Card. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa

S-Plastic Ultem 1100R resin is Standard flow Polyimide (Tg 217C) with internal mold release. ECO Conforming. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 165 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 3510 MPa ASTM D 790 IMPACT Value Unit

S-Plastic Ultem 1100FV resin is Standard flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card. US FDA and EU Food Contact compliant. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile

S-Plastic Ultem 1100F resin is Standard flow Polyimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile

S-Plastic Ultem 1100EF resin is Enhanced flow Polyimide (Tg 217C) with internal mold release. ECO Conforming, U.S. FDA and EU Food Contact compliant. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa ASTM D 638

S-Plastic Ultem 1100 resin is Standard flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 165 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 3720 MPa ASTM D 790 IMPACT Value Unit

S-Plastic Ultem CRS5201 resin is 20% Glass fiber filled, standard flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases,aromatics, and ketones. ECO Conforming, UL94 V0 and 5VA listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 131 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 5 % ASTM D 638 Tensile Modulus, 5 mm/min 6890 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 213 MPa ASTM

S-Plastic Ultem CRS5111 resin is 10% Glass fiber filled, enhanced flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases,aromatics, and ketones. ECO conforming, UL94 V0 and 5 VA listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 117 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 112 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 4 % ASTM D 638 Tensile Modulus, 5 mm/min 4750 MPa ASTM D 638

S-Plastic Ultem CRS5011R resin isEnhanced flow Polyimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases,aromatics and ketones. ECO Conforming. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 100 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 75 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 8 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5

S-Plastic Ultem CRS5011 resin is Transparent, Enhanced flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics,and ketones. ECO conforming, UL94 V0 listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 99 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 2890 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 137 MPa ASTM D 790 Flexural

S-Plastic Ultem 1010P resin is Enhanced Flow Polyimide (Tg 217C) in 350 micron powder. ECO Conforming. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 5 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 10 % ASTM D 638 Tensile Modulus, 5 mm/min 3440 MPa ASTM D 638 Flexural Stress, yld, 1.3 mm/min, 50 mm span

S-Plastic Ultem 1040A resin is Transparent, high flow Polyimide (Tg 217C). ECO Conforming.​PropertyTYPICAL PROPERTIES (1) MECHANICALValueUnitStandardTensile Stress, yld, Type I, 5 mm/min96MPaASTM D 638Tensile Strain, brk, Type I, 5 mm/min10%ASTM D 638Tensile Modulus, 5 mm/min3440MPaASTM D 638Flexural Stress, yld, 2.6 mm/min, 100 mm span158MPaASTM D 790Flexural Modulus, 2.6 mm/min, 100 mm span3510MPaASTM D 790IMPACTValueUnitStandardIzod Impact, unnotched, 23°C469J/mASTM D

S-Plastic Ultem 1010X resin is Enhanced flow Polyimide (Tg 217C) with low ionic contamination of less than 0.1 ppm each of leachable chloride and sulphates. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 3580 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span

S-Plastic Ultem 1010V resin is Transparent, enhanced flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 105 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 3580 MPa

S-Plastic Ultem 1010TC resin is Transparent, enhanced flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 105 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 3580 MPa

S-Plastic Ultem 1010RV resin is Enhanced flow Polyimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 105 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 3580 MPa

S-Plastic Ultem CRS5001 resin isTransparent, Standard flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics,and ketones. ECO conforming, UL94 V0 listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 99 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 2890 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 137 MPa ASTM D 790 Flexural

S-Plastic Ultem AUT230M resin is Transparent polyimide (Tg 247 degC). Contains low level of mold release. Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230 degC (S-Plastic Innovative Plastics method). ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, yld

S-Plastic Ultem AUT230 resin isTransparent polyimide (Tg 247 degC). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230 degC (S-Plastic Innovative Plastics method) ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 6 % ASTM D 638

S-Plastic Ultem AUT210 resin is Transparent Polyimide (Tg 227 degC). Very low outgassing and plateout, for automotive lighting applications where high lymetallized, reflective surfaces are required. Haze onset temperature of 212 degC (S-Plastic IP method). ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 105 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 88 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 8 % ASTM D 638 Tensile Strain, brk