Ultem PEI Resin

S-Plastic Ultem DH1004F resin is High Temperature, Transparent, Polyimide Blend with Improved Ductility and Enhanced Hydrostability. US FDA and EU Food Contact compliant. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 95 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 90 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 85 % ASTM D 638 Tensile Modulus, 5 mm/min 2900 MPa ASTM D 638

S-Plastic Ultem D9065 resin is Polyimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 88 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 88 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 100 % ASTM D 638 Tensile Modulus, 5 mm/min 3100 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 124 MPa ASTM D 790 Flexural Modulus,

S-Plastic Ultem CRS5711 resin is 15% Glass fiber filled, enhanced flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases,aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 124 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 4 % ASTM D 638 Tensile Modulus, 5 mm/min 5030 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 209 MPa ASTM

S-Plastic Ultem CRS5311 resin is 30% Glass fiber filled, enhanced flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 165 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638 Tensile Modulus, 5 mm/min 8960 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 234 MPa ASTM

S-Plastic Ultem 2110F resin is 10% Glass fiber filled, enhanced flow Polyimide (Tg 217C). US FDA and European Food Contact approved. Effective June, 2007 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU2110. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Taber Abrasion, CS-17, 1 kg 15 mg/1000cy S-Plastic Method Tensile Stress, break, 5 mm

S-Plastic Ultem 2110EPR resin is 10% Glass fiber filled, high flow Polyimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming,UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 119 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 119 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 3 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638 Tensile

S-Plastic Ultem 2110 resin is 10% Glass fiber filled, enhanced flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 114 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 115 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 6 % ASTM D 638 Tensile Modulus, 5 mm/min 4610 MPa ASTM D 638 Flexural Stress, brk, 2.6 mm/min, 100 mm span 199 MPa ASTM D 790

S-Plastic Ultem 2100R resin is 10% Glass fiber filled, standard flow Polyimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 114 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 115 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 6 % ASTM D 638 Tensile Modulus, 5 mm/min 4680 MPa ASTM D 638 Flexural Stress, brk, 2.6 mm/min, 100 mm

S-Plastic Ultem CRS5301 resin is 30% Glass fiber filled, standard flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases,aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 165 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638 Tensile Modulus, 5 mm/min 8960 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 234 MPa ASTM

S-Plastic Ultem 2100N resin is 10% Glass fiber filled, standard flow Polyimide (Tg 217C). ECO Conforming. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 114 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 115 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 6 % ASTM D 638 Tensile Modulus, 5 mm/min 4680 MPa ASTM D 638 Flexural Stress, brk, 2.6 mm/min, 100 mm span 199 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min,

S-Plastic Ultem CRS5211R resin is20% Glass fiber filled, enhanced flow Polyimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming. ​Property MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 137 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 144 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638 Tensile Modulus, 5 mm/min 6890 MPa ASTM D 638

S-Plastic Ultem CRS5211 resin is 20% Glass fiber filled, enhanced flow Polyimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases,aromatics, and ketones. ECO Conforming, UL94 V0 and 5VA listing. ​Property MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 137 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638 Tensile Modulus, 5 mm/min 6890 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 213 MPa ASTM

S-Plastic Ultem 2100F resin is 10% Glass fiber filled, standard flow Polyimide (Tg 217C). UL94 V0 listing. US FDA and European Food Contact approved. Effective June, 2007 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU2100. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Taber Abrasion, CS-17, 1 kg 15 mg/1000cy S-Plastic Method Tensile

S-Plastic Ultem CRS5201R resin is20% Glass fiber filled, standard flow Polyimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO Conforming. ​Property MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 131 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 5 % ASTM D 638 Tensile Modulus, 5 mm/min 6890 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 213 MPa

S-Plastic Ultem 1285 resin is Transparent Polyimide blend. ECO Conforming. US FDA and EU Food Contact Compliant in recognized colors. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 82 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 60 % ASTM D 638 Tensile Modulus, 5 mm/min 3370 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 165 MPa ASTM D 790

S-Plastic Ultem 1110V resin is Enhanced flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa ASTM D 638

S-Plastic Ultem 1110R resin is Enhanced flow Polyimide (Tg 217C) with internal mold release. ECO Conforming. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa ASTM D 638 Flexural Stress, yld, 1.3 mm/min, 50 mm

S-Plastic Ultem 1110FV resin is Enhanced flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA; color dependant, see UL Yellow Card. US FDA and EU Food Contact compliant, NSF 51 listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638

S-Plastic Ultem 1110F resin is Enhanced flow Polyimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant, NSF 51 listing. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1110. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Strain, brk,

S-Plastic Ultem 1110 resin is Enhanced flow Polyimide (Tg 217C). ECO Conforming. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Tensile Modulus, 5 mm/min 3720 MPa ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 165 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 3720 MPa ASTM D 790 IMPACT Value Unit Standard Izod Impact, Reverse