Inline Chemical Heater

Ultrapure In-Line PVDF/PFA Fluid Heaters PVDF/PFA ultrapure in-line fluid heaters are ideal for heating deionized water, acids, and less aggressive process chemistries use in high-purity processes of semiconductor, solar, MEMS manufacturing, and other industries using high-purity fluids. These heaters are designed for recirculation and point-of-use fluid heating applications. Their small footprints allow them to easily integrate into current systems. Available in 3-18 kW and

In-line PFA Fluid Heaters - Inline Chemical Heaters PFA/PTFE/PVDF Specialty In-Line PFA Fluid Heaters Higher Power, More Customizable, & Compact Overview HC Series in-line heaters are ideal for high-temperature, ultrapure processes. They feature PFA flow paths for optimal compatibility with aggressive chemicals. Their special internal fittings eliminate O-rings seals for enhanced cleanliness. They utilize the low-mass PreciseHeater® heating element with low watt density to

PTFE/PFA Chemical Bottom Heater Markets Semiconductor Life Sciences Industrial Applications Fluid Heating Watts Voltage Phase Dimension(mm) Model Number SHIP Wt.(kg) 2000 120-600 Single or Three 300×150×40 TFP2-12 3.5 3000 240-600 Single or Three 350×180×40 TFP3-14 4.5 4500 240-600 Single or Three 450×200×40 TFP4.5-18 6 6000 240-600 Single or Three 600×250×50 TFP6-24 7 9000 240-600 Single or Three 750×350×50 TFP6-30 8 10000 240-600 Single or Three 800×450×50 TFP10-32 9 12000

Best PFA Inline Chemical Heater for Semiconductor Now heat semiconductor process fluids up to 210°C! Faster heatup: Single heater chamber sizes up to 18kW. Rapid installation: Customized plumbing connections Long heater life for reduced cost of ownership (COO): Patented heater gas purge system continuously removes any chemical permeation and ensures long element life. Long heater life and clean operating: Patented heater gas purge system continuously removes chemical

Tytan™ Electric Inline Water Heater - Liquid & DI Water Heaters Model PWH-24i PWH-48i PWH-72i PWH-96i PWH-144i Heating method Radiation heating with near infrared rays Heater wattage 24kW 48kW 72kW 96kW 144kW Standardflowrat(e at55°C) 6l/min 12l/min 18l/min 24l/min 36l/min Minimum heating flow rate 2l/min 5l/min 10l/min Temperature setting range 25 to 85°C Temperature control accuracy ±1°C ※1 Flow meter indication range 0 to 10l/min 0to50l/min(. Nottheguaranteedrangeoftempera

Chemical and Solvent Heater - Chemical Heaters for Chemical and Process Tanks PreciseHeater is designed for heating chemicals and solvents in hazardous operating environments. Suitable for heating a wide variety of flammable and non-flammable chemistries using electropolished stainless steel wetted materials for improved cleanliness. Offers outstanding performance over a wide range of flow and temperature requirements. Available up to 36kW, the Frontier is the most powerful

PFA Immersion Tank Heaters- Industrial Tank Immersion Heaters Markets Semiconductor Life Sciences Industrial Applications Fluid Heating Overview PreciseHeater immersion tank heaters are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They

Inline Chemical Heater Performs Unmatched Semiconductor Process Fluid Heating Now heat semiconductor process fluids up to 210°C! Faster heatup: Single heater chamber sizes up to 18kW. Rapid installation: Customized plumbing connections Long heater life for reduced cost of ownership (COO): Patented heater gas purge system continuously removes any chemical permeation and ensures long element life. Long heater life and clean operating: Patented heater gas purge system continuous

Ultra Pure DI/RO/FLUID HEATERS / Solvent High Pressure Explosion Proof Immersion Heaters TECHS AND SPECS • Housing 316L SS construction Pharma/Semi Grade • Element 316L SS construction Pharma/Semi Grade • Wattage/Surface Area = Watts per square inch (WSI) 1 kw heater = 8 WSI 10 kw heater = 32 WSI • Units will not burn out with short periods of no flow • Units rated to 150 psig standard, custom to 10,000 psig+ • Size from 8” -24” long | Weight from 3 lbs -12 lbs • Standard

PTFE Immersion Bottom Heater For Semiconductor Fluid Heating,Chemicals & Plating Watts Voltage Phase Dimension(mm) Model Number SHIP Wt.(kg) 2000 120-600 Single or Three 300×150×40 TFP2-12 3.5 3000 240-600 Single or Three 350×180×40 TFP3-14 4.5 4500 240-600 Single or Three 450×200×40 TFP4.5-18 6 6000 240-600 Single or Three 600×250×50 TFP6-24 7 9000 240-600 Single or Three 750×350×50 TFP6-30 8 10000 240-600 Single or Three 800×450×50 TFP10-32 9 12000 240-600 Single or Three

Low Density PFA Immersion Bottom Heater For Chemical Solution Heating Markets Semiconductor Life Sciences Industrial PFA heaters are designed specifically for use as direct electric heaters in plants and tanks where space is at a premium and high heating capacities and excellent resistance to aggressive process liquids are required. The very good chemical resistance of the heating cable is achieved by the use of a special sheath made of FEP or PFA. The surface power density

PTFE/PFA Inline Chemical Heater for Wet processing equipment / Solvent Heaters for inline chemical heating Process fluid heating! Now heat semiconductor process fluids up to 210°C! BEST IN CLASS CHEMICAL HEATER The PTFE Inline Chemical Heater offers unmatched performance and reliability with the ability to heat a variety of chemicals up to 210°C. This heater is suitable for either single pass or recirculating applications. Delivers best- in-class performance over a wide range

Fluoropolymer (PTFE) Inline Chemical Heater For Semiconductor Wet Processes Process fluid heating! Now heat semiconductor process fluids up to 210°C! PRODUCT DESCRIPTION Unmatched in Semiconductor process fluid heating. Single chamber sizes up to 18kW FEATURES 1. Ruggedly designed for the most demanding recirculation or single pass chemical applications. 2. Able to achieve the highest temperature heating, up to 210°C. 3. All fluoropolymer wetted surfaces for virtually any wet

Ultra Pure Inline Fluid Heaters For Semiconductor Solar Cell Wafer Manufacturing Ultrapure In-Line PVDF/PFA Fluid Heaters PreciseHeater® series of Ultra-Pure In-Line Heaters are designed for use in industrial fluid heating applications such as semiconductor, solar cell wafer manufacturing, and otherapplications which require the most exacting standards of purity. Constructed of the highest-quality fluoropolymer materials, these heaters are custom designed and built for use