PE Water Pipes

Drip Irrigation Pipe 16mm About Irrigation Pipe HDPE Material Advantage (1) High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius. (2) Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe. Non-toxic: no heavy metal additives would not be covered with dirty or contaminated by bacterium. (3) Corrosion Resistant: resist

PE Pipe HDPE Irrigation Pipe For Water Supply Product Features 1) Non-toxic,No Leakage. 2) Smooth Surface 3) Excellent Flexibility 4) Easy Installation and Lower costs 5) Hygienic Safety 6) Corrosion resistant. 7) Recycle and environment-friendly Product Description HDPE pipe is widely used for water supply,irrigation,chemical industry.We use PE resin with god mechanical property as raw material.The pipe has good tensile strength. Outer diameter:20mm~1600mm Material:High

PE100 Large Diameter HDPE Water Supply Pipe PN6 Product Features 1) Non-toxic,No Leakage. 2) Smooth Surface 3) Excellent Flexibility 4) Easy Installation and Lower costs 5) Hygienic Safety 6) Corrosion resistant 7) Recycle and environment-friendly Storage method of pipes (1)The pipes and fittings shall have the product quality inspection report issued by the quality inspection department and the certificate of quality issued by the manufacturer. (2) When storing, handling and

Steel Mesh Enhanced PE Pipe Process: Steel Mesh Enhanced PE Pipe is a new kind of pressure pipe, was invented by HTIDC. It is made by combining metal-shaped steel reinforcement with polyethylene through extrusion technology. The steel mesh is made by continuously winding and welding the transverse wires spirally to the longitudinal wires to form a continuous tube-like mesh. Properties: 1. Polyethylene Material The stuffing material of Steel Mesh Enhanced PE Pipe and fitting

Steel Wire Mesh PE Composite Pipe For Water Supply Product Introduction: Steel wire mesh PE composite pipe for water supply are new-type medium, high or low-pressure composite pipes reinforced by high-strength plastic-covered steel wire and covered with composite thermal plastic at internal and external surface. Owning to the reinforcement is covered in continuous thermal plastic, this kind of composite pipe not only overcomes shortcomings of steel pipes and plastic pipes,

Super Wear Resisting High Pressure PE Multi Layer Composite Pipe 1.Product introduction Super wear resisting high pressure PE multi layer composite pipe is a new type of wear-resisting material (modified polyolefin) and the products can be divided into two types according to their structure, namely the super wear-resisting composite pipe and high-pressure super wear-resisting multi-layer composite pipe. Thickness and strength of the super wear-resisting composite pipe comply

Water Supply Flexible Black Plastic HDPE Pipe Roll Basic Information Model Number:HDPE PIPE FOR WATER SUPPLY Brand Name: SENPU Port Size:DN16-DN1200MM Working Pressure:0.32Mpa to 2.5Mpa Product Application:water supply and drainage,waste water Product Color: Black with blue strip Length:5.8m;6m,12m according customer's requirement Lead Time: 5-10 working days Connection:Socket Fusion, Butt fusion, Electric Fusion Reference standard: GB/T13663.2 Mainly connection ways 1) Dn

Plastic 160mm PE Water Pipes HDPE Pipes Basic Information ITEMS HDPE PIPE MATERIAL POLYETHYLENE (PE100) PRESSURE RATING PN5,PN6,PN8,PN10,PN12.5,PN16,PN20,PN25 SIZE RANGE 16-630MM STANDARD ISO 4427-2, EN 12201-2, AS/NZS 4130, BS 6920, GB/T 13663. COLORS BLACK, BLUE CERTIFICATE ISO14001, OHSAS18001, ISO9001, CE CONNECTION SOCKET FUSION, BUTT FUSION, ELECTRIC FUSION HDPE Granule Feature The unique characteristics of all grades of HDPE are the appropriate combination of four

1000mm 1200mm HDPE Pipe For Wastewater Treatment Plant Product Parameter Product Name 1000mm 1200mm HDPE Pipe for wastewater treatment plant Material PE100, PE80 Colour Black With Blue Stripe Or Customized Size DN 20mm-1600mm Thickness 2.3mm ~ 117.6mm Working pressure 0.6MPa ~ 2.0MPa Executive standard ISO 9001, ISO 4427, EN 12201 Temperature Range - 60℃ ~ 40 ℃ Length 5.8M /pc, 11.86M /pc Or Customized Application Water Supply, Drainage, Sewerage Treatment, Mine And Slurry

Water Supply PE Pipe Brief Introduction SENPU brand polyethylene (PE) pipe for water supply is made of high-quality PE80 or PE100 raw materials, which meets or exceeds the standard requirements of GB/T13663.2, and has excellent physical and mechanical properties. It is black with longitudinal blue co-extruded strip. Reference standard: GB/T13663.2 Total PE100 is a high performance hexane-based compound primarily intended for hot(80°C) & cold water pipe as well as demanding

SDR 11 PE Water Pipe HDPE PIPE PROFILE HDPE pipe is a type of flexible plastic pipe used for fluid and gas transfer and is often used to replace ageing concrete or steel mains pipelines. Made from the thermoplastic HDPE (high-density polyethylene), its high level of impermeability and strong molecular bond make it suitable for high pressure pipelines. HDPE pipe is used across the globe for applications such as water mains, gas mains,[sewer mains, slurry transfer lines, rural

Steel Fiber Skeleton PE Composite Pipeline Product Properties of Steel Fiber Skeleton PE Composite Pipeline 1. No Leakage Adopting the technology of socket fusion welding, the fiber reinforced polyethylene pipe is realizing the integration of the joints and the pipes essentially by a guaranteed identity of the joints material, pipeline structure and the pipe body. 2. Environmental Protection The inner layer is polyethylene material, which is constituted by two elements C and

PP-R Pipe For Hot And Cold Water Installations Application: The product are mainly used for hot and cold water transportation, (long-term operating temperature is not higher than 70 °C, the threshold failure temperature up to 95 °C) ,heating and air conditioning equipment system for civil building, meanwhile, it can be used in industrial construction, pure water, medicine, chemical, agriculture and other places where liquid media are transported. Performance and characteristi

Water Supply Flexible Black Plastic HDPE Polyethylene Pipe Roll Product Features 1) Non-toxic,No Leakage. 2) Smooth Surface 3) Excellent Flexibility 4) Easy Installation and Lower costs 5) Hygienic Safety 6) Corrosion resistant. 7) Recycle and environment-friendly About HDPE Pipe HDPE water supply pipe use PE110 or PE80 as raw materials, processing good flexibility, corrosion resistance, excellent impact resistance and other characteristics, pipe and fittings can be employed

White Color PP-R Water Pipe Basic Information Place of Origin: Sichuan, Tianjin. Product Name: SENPU Raw Material:PE, PE100/PE80 Model Number:White Color PP-R Water Pipe Port Size:20mm-630mm, SGS Thickness:1.2mm/1.4mm/1.8mm Certificates: CE, ISO, WRAS, IAPMO R&T Applications:Drainpipe, Water Supply Pipe, Agricultural Irrigation Pipe Features of PPR Pipe For Building Water Supply: Easy to Weld Easy to fit Chemical resistant High-grade quality Superior in performance Affordable

Acid and Alkali Resistant Water Collection PE Pipe Brief Introduction The acid-alkali-resistant collection pipe is based on the traditional drainage pipe, and the acid resistance of the double-wall corrugated pipe is improved through the improvement of the formula; then through the ingenious mechanical design principle, a special set of special, complex structure but convenient to use is designed. The corrugated pipe grooving device with high working efficiency, without

Water Supply Application HDPE Pipe Process: We provide High Density Polyethylene Pipe (HDPE Pipe), HDPE Plastic Pipe and HDPE Irrigation Pipe, which is available in all standards like ISI-4984, ISO-4427, DIN-8074 and various grades like PE-63, PE-80, PE-100 and newly invented PE 100 material that is approved by international agencies such as Bodycote, Germany. Made using 100% virgin grade HDPE compounds, our range of pipe have an average life of more than 50 years under

White Color PP-R Water Pipe About PPR Pipe Compared with the traditional cast iron pipe, galvanized steel pipe, cement pipe and other pipes, PPR pipe has the advantages of energy saving, environmental protection, light weight and high strength, corrosion resistance, smooth inner wall without scaling, easy construction and maintenance, long service life, etc. Widely used in construction water supply and drainage, urban and rural water supply and drainage, urban gas, electric

PE80 Large Diameter HDPE Water Supply Pipe PN6 Product Features Material: PE, Polyethylene hdpe pipe Specification:16-1200mm Length: 5.8m,11.8m Color: Black or Black with blue strip Application: Water supply Connection: welding Pressure:PN5,PN6,PN8,PN10,PN12.5,PN16,PN20,PN25 Certification:ISO14001,OHSAS18001,ISO9001 Company Service 1. Fast Delivery: around 10 days below 500Metric Tons after sight of Irrevocable L/C or Deposit;( lots of high quality products are in stock) 2.

E80 100 Water Pipe For Water Ags Oil Transportation Product Description HDPE water supply pipe use PE110 or PE80 as raw materials, processing good flexibility, corrosion resistance, excellent impact resistance and other characteristics, pipe and fittings can be employed melt socket connection, Butt and fused connection,to insure the pipe system safety and reliability as well as low construction cost. Product Features 1) Non-toxic,No Leakage. 2) Smooth Surface 3) Excellent