Fluoropolymer Resin

PTFE Fine Powder SF-504 with Low RR for Membrane, Cable Wrapping Film, Seal Tape Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0

White and Semi-transparent PVDF Pellet For Extrusion Processing SF-F22E-2 with MFR 8-13 Product Description Polyvinylidene fluoride (PVDF) is the homopolymer of vinylidene fluoride (VDF). It is a new fluorocarbon thermoplastic with excellent mechanical performance, good impact resistance, abrasion resistance, weatherability and chemical stability. It is widely used in chemical industry, electrical and electronic industry, food industry, space industry and architectural

PFA Pellet SF-3101 with MFR 0.8-3.0 Product Description PFA is the copolymer of TFE and PPVE, with excellent chemical stability. electrical insulating property, age resistance and low friction. Its high temperature mechanical property is much higher than PTFE and can be processed as common thermoplastics. Grades and Technical parameters Item SF-3101 SF-3102 SF-3103 SF-3104 Appearance Translucent particles or white powder, no impurities MFR, g/10min 0.8-3.0 3.1-6.0 6.1-15 15.1

PTFE Dispersion SF-601 Grades and Technical Properties Item SF-604 SF-601 SF-604Z SF-631Z SF-651PS SF-661 Appearance Milky Or Yellowish Liquids Solids Content, wt % 60±2 50±2 pH 9.5-10.5 Average Particle Size,μm 0.17-0.21 0.17-0.25 0.21-0.25 0.21-0.25 60-130(nm) 190-230(nm) Viscosity((25±1℃) Pa·s (18-30)×10-3 (16-30)×10-3 (1-15)×10-3 Surfactant Content, wt % on solids 5.6-6.6 5.0-6.0 4.8-5.8 4.8-5.8 5-10 5-8 Application: SF-604: Coating, Impregnating etc. SF-601: Coating,

PTFE Dispersion SF-604 Grades and Technical Properties Item SF-604 SF-601 SF-604Z SF-631Z SF-651PS SF-661 Appearance Milky Or Yellowish Liquids Solids Content, wt % 60±2 50±2 pH 9.5-10.5 Average Particle Size,μm 0.17-0.21 0.17-0.25 0.21-0.25 0.21-0.25 60-130(nm) 190-230(nm) Viscosity((25±1℃) Pa·s (18-30)×10-3 (16-30)×10-3 (1-15)×10-3 Surfactant Content, wt % on solids 5.6-6.6 5.0-6.0 4.8-5.8 4.8-5.8 5-10 5-8 Application: SF-604: Coating, Impregnating etc. SF-601: Coating,

Product Description PCTFE is a homopolymer of chlorotrifluoroethylene. It is a unique fluoropolymer that is capable of maintaining its physical properties at exceptionally low operating temperatures. It absorbs virtually no moisture, meaning it offers great dimensional stability, and maintains its electrical properties in a high humidity environment. Properties General properties Value Unit Test method Density: 2.1 g/cm3 ISO 1183-1 Water absorption in Air (23˚C / 50% RH) 0.01

PTFE Dispersion SF-631Z Grades and Technical Properties Item SF-604 SF-601 SF-604Z SF-631Z SF-651PS SF-661 Appearance Milky Or Yellowish Liquids Solids Content, wt % 60±2 50±2 pH 9.5-10.5 Average Particle Size,μm 0.17-0.21 0.17-0.25 0.21-0.25 0.21-0.25 60-130(nm) 190-230(nm) Viscosity((25±1℃) Pa·s (18-30)×10-3 (16-30)×10-3 (1-15)×10-3 Surfactant Content, wt % on solids 5.6-6.6 5.0-6.0 4.8-5.8 4.8-5.8 5-10 5-8 Application: SF-604: Coating, Impregnating etc. SF-601: Coating,

White and Semi-transparent PVDF Pellet For Extrusion Processing SF-F22E-1 with MFR 4-8 Product Description Polyvinylidene fluoride (PVDF) is the homopolymer of vinylidene fluoride (VDF). It is a new fluorocarbon thermoplastic with excellent mechanical performance, good impact resistance, abrasion resistance, weatherability and chemical stability. It is widely used in chemical industry, electrical and electronic industry, food industry, space industry and architectural

PTFE Fine Powder SF-504Swith High RR for Membrane Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0(400:1) 20.0-35.0(400:1)

FEP Pellet SF-214 with MFR 0.8-2.0 Product Description FEP is the copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). With good thermal stability, prominent chemical inertness, desirable electrical insulation, and low friction coefficient, it can be processed with thermoforming technique. Grades are classified by different melting flow rate (MFR). Grades and Technical Properties Item SF-211 SF-212 SF-213 SF-214 MFR g/10min 15-32 6.0-14 2.1-5.9 0.8-2.0

FEP Pellet SF-212 with MFR 6.0-14 Product Description FEP is the copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). With good thermal stability, prominent chemical inertness, desirable electrical insulation, and low friction coefficient, it can be processed with thermoforming technique. Grades are classified by different melting flow rate (MFR). Grades and Technical Properties Item SF-211 SF-212 SF-213 SF-214 MFR g/10min 15-32 6.0-14 2.1-5.9 0.8-2.0 Tensile

FEP Pellet SF-211 with MFR 15-32 Product Description FEP is the copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). With good thermal stability, prominent chemical inertness, desirable electrical insulation, and low friction coefficient, it can be processed with thermoforming technique. Grades are classified by different melting flow rate (MFR). Grades and Technical Properties Item SF-211 SF-212 SF-213 SF-214 MFR g/10min 15-32 6.0-14 2.1-5.9 0.8-2.0 Tensile

FEP Pellet SF-213 with MFR 2.1-5.9 Product Description FEP is the copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). With good thermal stability, prominent chemical inertness, desirable electrical insulation, and low friction coefficient, it can be processed with thermoforming technique. Grades are classified by different melting flow rate (MFR). Grades and Technical Properties Item SF-211 SF-212 SF-213 SF-214 MFR g/10min 15-32 6.0-14 2.1-5.9 0.8-2.0

PTFE Fine Powder SF-503S with Low RR for Thick Wall Tube, Thin Rod Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0(400:1)

PTFE Fine Powder SF-504X with Medium RR for Long Fiber Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0(400:1) 20.0-35.0(400

PTFE Fine Powder SF-506H with LowRR for Membrane Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0(400:1) 20.0-35.0(400:1) 30

PTFE Fine Powder SF-503with Low RR for Thread Seal Tape Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0(400:1) 20.0-35.0

PTFE Fine Powder SF-5046C with Low RR for Thick Wall Tube and Electric Wire Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0

PTFE Fine Powder SF-5048 with High RR for Micro Tube, Thin Wall Tube, Wire, Cable Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30

PTFE Fine Powder SF-506 with Low RR for Membrane Grades and Technical Properties Item SF-501 SF-503 SF-5046CF SF-504 SF-504X SF-504S Bulk Density, g/L 475±100 Tensile Strength, MPa≥ 24 Elongation, % 480-550 300 250 300 Moisture Content, %≤ 0.03 Standard Specific Gravity ≥ 2.200 2.150-2.200 2.160-2.200 2.150-2.200 2.120-2.150 2.150-2.220 Average Particle Size, μm 400-575 Maximum Reduction Ratio 400:1 Extrusion Pressure, Mpa 20.0-40.0(400:1) 30.0-50.0(400:1) 20.0-35.0(400:1) 30