Flash Memory IC Chip
Darlington Bipolar Power Transistor TIP147 PNP 10A 100V TO-3P
High-gain PNP Darlington transistor with 10A current and 100V voltage rating. Features low saturation voltage and built-in base-emitter shunt resistor. Ideal for general-purpose amplifiers and low-speed switching. Reliable monolithic construction.
TIP42C PNP Power Transistor 100V 6A TO220 Package High Voltage Switch Circuit
High voltage NPN power transistor for switching and audio amplifier circuits. Features 100V breakdown voltage, 6A collector current, high switching speed, and improved hFE linearity. Ideal for power linear and general purpose applications.
MAX3232ESE RS-232 Transceiver IC 3.0V to 5.5V 1Mbps Low-Power Dual Charge Pump
True RS-232 transceiver IC operating from 3.0V to 5.5V supply. Supports data rates up to 1Mbps with low-power dual charge pump. Requires only four 0.1µF external capacitors. Ideal for battery-powered and handheld equipment. Available in stock.
MAX3469 5V Fail Safe 40Mbps PROFIBUS RS-485 RS-422 Transceivers IC
High-speed differential bus transceiver for RS-485/422, compliant with PROFIBUS. Features 40Mbps data rate, true fail-safe circuitry, 128 transceivers on bus, and thermal shutdown. Ideal for industrial control networks.
ADM202EARNZ RS232 Interface Device SOP8 5V 230kbps Circuit Board Chip
Robust 2-channel RS-232 interface device operating from single 5V supply. Features ±15kV ESD protection, EMC compliance (89/336/EEC), and 230kbps data rate. Ideal for portable instruments and PDAs. Upgrade for MAX202E.
MCP23S17-E/SO 16-Bit I/O Expander IC SPI Interface 10MHz 1.8V-5.5V SOIC
High-speed SPI I/O expander with 16 bidirectional ports, configurable interrupts, and low 1µA standby current. Supports up to 8 devices on bus. Operating voltage 1.8V-5.5V. Ideal for industrial control and embedded systems.
TMP112AIDRLR Digital Temperature Sensor IC SOT563 12Bit I2C 0.5C Accuracy for Medical Instruments
High-accuracy ±0.5°C digital temperature sensor IC in compact SOT563 package. Features 12-bit resolution, low 10μA active current, 1.4V to 3.6V supply range, and I2C/SMBus interface. Ideal for portable medical devices, battery management, and industrial controls. NIST traceable.
TC1047AVNBTR Temperature to Voltage Converter IC Linear Output SOT-23 -40C to +125C
Linear voltage output temperature sensor with 10 mV/°C slope. Measures -40°C to +125°C with ±2°C accuracy. Wide supply range 2.5V to 5.5V. Low 35 µA current. Ideal for thermal management in portable and consumer electronics.
STM32F767IGT6 ARM Cortex-M7 32bit MCU 216MHz 1MB Flash 512KB RAM
High-performance ARM Cortex-M7 MCU with FPU, 462 DMIPS, up to 2MB Flash, 512KB SRAM, USB OTG, LCD-TFT, and DSI. Ideal for automation, automotive, and embedded systems. Supports custom configurations.
ACS712ELCTR-05B-T Hall Effect Current Sensor Chip 5A 1 Channel 8-SOIC
The ACS712ELCTR-05B-T is a fully integrated Hall-effect current sensor IC for AC/DC sensing up to 5A. Features 2.1 kVRMS isolation, 80 kHz bandwidth, low-noise analog path, and 1.2 mΩ conductor resistance. Ideal for motor control, power supplies, and overcurrent protection.
ICM-20602 6-Axis Motion Tracking Device 3mm x 3mm LGA-16 Gyroscope Accelerometer ±1% Sensitivity Error
High-performance 6-axis MEMS motion tracker combining 3-axis gyroscope and accelerometer in a compact 3x3x0.75mm LGA package. Features ±1% gyro sensitivity, 1KB FIFO, 16-bit ADCs, I2C/SPI interface, and low 1.71V operation. Ideal for IoT, wearables, and motion control.
STM32F401CEU6 ARM Cortex-M4 32-bit MCU 512KB Flash 84MHz ART Accelerator
High-performance 32-bit MCU with ARM Cortex-M4 FPU, DSP, 512KB Flash, 96KB SRAM, and ART Accelerator. Features USB 2.0 OTG, multiple I2C/SPI/USART, and 12-bit ADC. Ideal for industrial, motor control, and automation applications.
LPC1788FBD208K Cortex M3 Microcontroller 512KB Flash 120MHz 32-bit MCU
High-performance 32-bit MCU with 512KB flash, 96KB data memory, and 120MHz Cortex-M3 core. Features Ethernet, USB 2.0, CAN, LCD controller, and low power consumption. Ideal for industrial networking, eMetering, and motor control applications.
STM32F429IIT6 32 Bit MCU Chip 2MB Flash ARM Cortex M4 180MHz FPU DSP
High-performance ARM Cortex-M4 MCU with 2MB Flash and 256KB SRAM. Features FPU, DSP, LCD-TFT controller, and advanced connectivity including USB OTG and Ethernet. Ideal for automation, motor control, and embedded systems.
STM32F427VIT6 ARM Cortex-M4 MCU 180MHz 2MB Flash 256KB SRAM TFT LCD Controller
Low power 32-bit microcontroller based on ARM Cortex-M4 with FPU and DSP. Features 180MHz CPU, 2MB Flash, 256KB SRAM, TFT LCD controller, and Chrom-ART Accelerator. Ideal for robotics, automation, and motor control. Supports multiple communication interfaces and debug modes.
STM32F429ZGT6 32-Bit ARM Cortex-M4 MCU 180MHz 1MB Flash 144-LQFP
High-performance 32-bit MCU with ARM Cortex-M4 FPU, 180MHz, 1MB Flash, 256KB SRAM. Features LCD-TFT controller, Ethernet, USB OTG, 17 timers, 3 ADCs. Ideal for automation, motor control, and embedded systems.
TDK TSL1112RA-102JR50-PF Power Line Choke Inductor 1000uH 0.5A Radial Lead
Low DC resistance and high current handling for power supply lines. Manufactured with non-flammable UL94V-0 material. RoHS compliant. Ideal for TVs, PCs, and electronic equipment. Available in tape packaging for automated mounting.
STM32F107VCT6 32 Bit ARM Cortex M3 MCU 256KB Flash 72MHz for Motor Drive Control
ARM Cortex-M3 MCU with 256KB Flash, 72MHz CPU, Ethernet MAC, CAN and USB 2.0 OTG. Features 64KB SRAM, 12-bit ADCs, and wide -40 to +105°C range. Ideal for motor drives, industrial control, and medical equipment.
SANYOU SRD-S-112DM(F-11) 12V DC Power Relay 1 Pole 12A Flux Proofed for Air Conditioner
Ultra miniature SANYOU relay with 12V DC coil and high 12A contact capacity. Flux proofed sealed construction ensures durability. Low power consumption, washable types available. Ideal for home appliances, air conditioners, and office machines.
CC1110F32RHHR Integrated Circuit QFN36 Wireless RF Transceiver 32KB Flash
High-performance sub-1 GHz SoC combining CC1101 RF transceiver with 8051 MCU. Features 32KB flash, 4KB RAM, high sensitivity (-110 dBm), and low power consumption (0.3 µA standby). Ideal for compact wireless applications. RoHS compliant.