Flash Memory IC Chip

Fully isolated RS-232 transceiver with integrated isoPower DC-DC converter. Features 2.5 kV isolation, 460 kbps data rate, ±8 kV ESD protection, and UL/VDE/CSA certifications. Ideal for industrial communications and medical equipment.

5kV RMS signal isolated CAN transceiver compliant with ISO 11898. Supports data rates up to 1 Mbps with short-circuit protection on 24V systems. Features thermal shutdown, high common-mode transient immunity, and industrial temp range -40°C to +125°C in a 16-lead SOIC package.

Precision sensor interface IC optimized for closed-loop current sensor modules. Features 250mA H-bridge drive, 200kHz bandwidth, and 0.2% accurate reference. Eliminates Hall sensor offset and drift. Supports 2.5V, 1.65V, and ratiometric output. Industrial temp range -40°C to +125°C.

Quad differential line receiver for RS-422/423. Low power 10mA typical, 5V supply, 17ns propagation delay. Input fail-safe, 3-state outputs. Ideal for factory automation, motor drives, and smart grid applications.

The IWR1642BOOST evaluation board enables rapid prototyping with TI's IWR1642 mmWave sensor. Features onboard XDS110 JTAG emulation, dual 20-pin LaunchPad connectors, CAN transceiver, and 5V power jack. Ideal for industrial and automotive radar applications.

Automotive-grade dual digital isolator with 100 Mbps data rate and 5000 VRMS isolation. Features low power consumption, high CMTI, and robust EMC. Certified to VDE, UL, CSA, CQC, and TUV. Ideal for EV/HEV BMS, onboard chargers, and traction inverters.

Dual-channel digital isolator with 1Mbps signaling rate, 4000Vpk galvanic isolation, and 50kV/μs transient immunity. Operates from 2.8V to 5V supplies. VDE, UL, CSA certified. Ideal for industrial fieldbus, Modbus, and servo control interfaces.

ISO3088DWR isolated RS-485 transceiver with 20Mbps signaling rate, 256 nodes, and 4000Vpk isolation. Ideal for factory automation, HVAC, and security systems. Features thermal shutdown, fail-safe receiver, and robust ESD protection.

Low-power bidirectional I2C isolator supporting up to 1MHz operation. Features 3V-5.5V supply range, 4kV ESD protection, and 4242V isolation. Ideal for isolated I2C buses, motor control, and battery management. Available in SOIC-8 package.

High-speed passive switch for USB 3.0, DisplayPort, PCIe, and SATA. Supports data rates up to 10 Gbps with 3.3V operation. Features low crosstalk and insertion loss in a compact 42-pin WQFN package. Ideal for PCs, tablets, and docking stations.

High-performance 4-channel differential switch supporting PCI Express Gen III and USB 3.0 up to 12 Gbps. Features 8 GHz bandwidth, low crosstalk, and 3.3V operation in a compact 42-pin WQFN package. Ideal for servers, desktops, and PCIe backplanes.

High-speed passive switch for 4 differential channels, supporting PCI Express Gen III and USB 3.0 up to 12 Gbps. Features wide 8 GHz bandwidth, low crosstalk, and bidirectional MUX/De-MUX. Ideal for servers, desktops, and PCIe backplanes. Operates at 3.3 V in a compact 42-pin WQFN package.

Integrated USB Type-C port controller with 2:1 SuperSpeed mux supporting up to 10 Gbps and 15 W power delivery. Features CC logic, VCONN, and industrial temp range -40 to 85°C. Ideal for hosts, devices, and DRP applications.

Unidirectional TVS ESD protection diode array with IEC 61000-4-2 Level 4 rating (±30kV contact/air). Supports 25A surge (8/20μs), low clamping at 6.5V, 4.5pF IO capacitance, and high-speed interfaces up to 5 Gbps. Ideal for Ethernet, USB 2.0, and GPIO protection in industrial temp range -40°C to +125°C.

Quad M-LVDS transceiver for high-speed clock/data distribution. Supports 125MHz/250Mbps with low jitter, 8kV ESD protection, and wide common mode range. Ideal for ATCA backplanes and multipoint networks.

Automotive-grade AEC-Q100 interface bridge recovers FPD-Link II serial data to MIPI CSI-2. Supports 10-75 MHz PCLK, up to 2.1 Gbps line rate, and 900 Mbps per data lane. Ideal for infotainment and camera systems. 40-pin WQFN package.

Automotive-grade FPD-Link III deserializer supporting up to 2K resolution with 24-bit color depth. Features adaptive equalization, dual LVDS output, and I2C/SPI control. Ideal for infotainment and cluster displays. AEC-Q100 qualified.

AEC-Q100 qualified deserializer for automotive displays and cameras. Supports 5-85 MHz PCLK, 24-bit RGB, I2S audio, and bidirectional I2C control over single differential pair up to 10 meters. Features adaptive equalization, EMI minimization, and low power modes.

Automotive-grade serializer supporting 85MHz PCLK and 24-bit color for HD video and camera systems. Features bidirectional control channel, I2C interface, and AC-coupled STP up to 10 meters. AEC-Q100 Grade 2 qualified with >8kV HBM ESD rating. Ideal for navigation, rear seat entertainment, and driver assistance.

High-speed LVDS driver IC supporting data rates over 400Mbps with low 23mW power dissipation. Conforms to TIA/EIA-644-A standard, features 700ps differential skew, and operates from -40°C to +85°C. Ideal for low power, high frequency applications.