Flash Memory IC Chip

High output current 1.1A current feedback amplifier with 35MHz bandwidth and 900V/us slew rate. Features ±5V to ±15V supply range, shutdown mode, and stable with 10,000pF load. Ideal for cable drivers, buffers, and test equipment. Available in TO-220 and DD packages.

Ultralow noise and distortion op amp ideal for 16/18-bit systems. Features 0.9 nV/√Hz noise, 65 MHz bandwidth, and 55 V/μs slew rate. Wide ±5V to ±16V supply range. Unity gain stable with low offset voltage. Suitable for instrumentation, active filters, and ADC drivers.

Quad CMOS operational amplifier with 220 MHz bandwidth and 170 V/μs slew rate. Features rail-to-rail output, low distortion, and 4.4 mA per amplifier. Ideal for automotive, video, and active filter applications. Qualified for -40°C to +125°C.

Low power 1.1 mA/amp amplifier with ultra-low noise 2.1 nV/√Hz and low distortion -105 dBc. Rail-to-rail output, wide supply range 2.7V to 12V. Ideal for battery-powered instrumentation and 16-bit ADC drivers. RoHS compliant.

Ultralow offset voltage of 12 μV and drift of 0.6 μV/°C ensure high precision. Features 2.8 nV/√Hz noise, 10 MHz bandwidth, and rail-to-rail output. Ideal for instrumentation, medical, and sensor applications. Operates from ±5 V to ±18 V.

Ultralow noise 2.8nV/√Hz op amp with 75μV max offset, 120dB gain, and rail-to-rail output. Ideal for precision instrumentation, medical devices, and sensor amplifiers. Supports ±5V to ±15V operation. RoHS compliant.

Precision low power FET input op amp with true single-supply operation from 5V to 30V. Features rail-to-rail output, 800 μV max offset, 25 pA bias current, 1.8 MHz bandwidth, and drives up to 350 pF load. Ideal for battery-powered instrumentation and data acquisition.

The AD706ARZ is a dual low power bipolar op amp with picoamp input bias current and microvolt offset voltage. Ideal for precision instrumentation, active filters, and integrators. Available in 8-lead SOIC package. High DC precision and low drift.

Micropower instrumentation amplifier with 85μA max supply current and rail-to-rail output. Gain set with one resistor from 5 to 1000. High accuracy with 0.03% gain error and 125μV offset. Ideal for 4-20mA loops, medical instrumentation, and portable devices.

The AD623ARZ-R7 is a low power instrumentation amplifier with rail-to-rail output swing, operating from 3V to 12V single or dual supplies. Gain set with one resistor from 1 to 1000. Ideal for medical instrumentation, transducer interfaces, and industrial controls.

The LM321 is a low power single operational amplifier with 1 MHz gain-bandwidth and 430 μA supply current. Wide 3V to 32V range, stable with high capacitive loads. Ideal for chargers, power supplies, and industrial controls. Available in compact SOT-23 package.

Precision high-speed dual comparator with 80ns response time. Operates from 5V to ±15V supplies. Features low 1μA input current, high common-mode slew rate, and 25mA output drive. Ideal for industrial logic and relay control. Available in 0°C to +70°C range.

Dual voltage comparator ICs operating from 2V to 36V single or dual supplies. Low supply current 0.4mA, low input bias 25nA. Outputs compatible with TTL, MOS, CMOS. Ideal for sensors, motor control, weigh scales. Available in SOIC-8 package.

Monolithic IC for flyback, boost, and forward converters. Features 3A NPN switch, 65V standoff, 100kHz oscillator, soft-start, and current-mode control. Output tolerance ±4%. Available in 3.3V, 5V, 12V, and adjustable versions. Cost-effective with minimal external components.

Low-power instrumentation amp with 200μA supply current, 36V range, and rail-to-rail output. Features 150μV max offset, 104dB CMRR (G=10), and ±40V input protection. Ideal for industrial controls, battery testers, and ECG amplifiers. Available in 8-pin VSSOP package.

High-precision current-sense amplifier with 200V/V gain, ±35μV offset, and 100μA quiescent current. Ideal for overcurrent protection and power management in notebooks, telecom, and battery chargers. Available in SC70 and UQFN packages.

High-precision current sense amplifier with wide common-mode range -0.3V to 26V. Low offset voltage ±150μV and gain error ±1%. Ideal for overcurrent protection and battery monitoring in telecom and wireless charging applications.

Low offset voltage of 50μV max and high CMR of 120dB min ensure accurate signal amplification. Ideal for bridge, thermocouple, and medical instrumentation. Wide supply range ±2.25V to ±18V. Available in 8-pin SOIC package.

Precision isolated amplifier with ±250mV input optimized for shunt current sensing. Features 8.2 fixed gain, low offset drift, and 7000VPEAK reinforced isolation. Ideal for motor drives and inverters. Certified to VDE V 0884-10 and UL1577. Extended temp range -40°C to +125°C.

Dual differential comparator with wide 2V to 36V supply range. Low 0.4mA typical current drain per comparator. TTL/MOS/CMOS compatible outputs. Ideal for sensor, motor control, and weighing applications. Available in multiple packages.