Flash Memory IC Chip

Quad high-gain frequency-compensated op-amp IC designed for single or split supplies up to 32V. Ideal for transducer amplifiers and DC amplification. Features low supply-current drain, wide temperature range -40°C to 125°C, and multiple package options for flexible integration.

The OP27G combines ultra-low noise (80 nV p-p), low drift (0.2 µV/°C), and high speed (8 MHz GBW, 2.8 V/µs slew rate) for precision instrumentation and audio. Ideal for high-gain amplification with 1.8M open-loop gain and 126 dB CMRR.

Dual-channel zero drift op amp with 5 µV max offset and 22 nV/°C drift. Features 55V supply, rail-to-rail output, EMI filters, and unity-gain stability. Ideal for precision sensing and industrial applications.

Ultra-low noise 1.8nV/Hz precision dual op amp with 12MHz bandwidth, 125μV max offset, and 90nA max bias current. Ideal for instrumentation, microphone preamps, and industrial control. Operates from ±5V to ±15V, -40°C to +125°C.

Low noise 8nV/√Hz precision dual amplifier with 65μV max offset and 1pA bias current. Wide 10MHz bandwidth, rail-to-rail I/O, 2.7V to 5.5V supply. Ideal for photodiode, sensor, and audio applications. Industrial temp range -40°C to +125°C.

Dual rail-to-rail input/output amplifier with ultra-low offset voltage of 65μV max and low noise of 8nV/√Hz. Wide 10MHz bandwidth and 2.7V to 5.5V single-supply operation. Ideal for photodiode amplification, sensors, and battery-powered instrumentation.

AD8552 dual zero-drift amplifier offers 1 μV offset and 0.005 μV/°C drift for high-accuracy sensing. Rail-to-rail input/output, 130 dB CMRR/PSRR, and 700 μA supply current. Ideal for medical, pressure, and temperature sensor applications. No external capacitors needed.

Micropower zero-drift instrumentation amplifier with rail-to-rail input/output. Gain set by two external resistors. Features 106 dB CMRR, 0.3 μV/°C offset drift, and 8 kV ESD rating. Ideal for portable and medical instrumentation.

The OP27GSZ combines ultra-low noise of 3 nV/√Hz, low drift of 0.2 μV/°C, and high speed with 8 MHz gain bandwidth. Ideal for precision instrumentation and professional audio. Available in die form.

Automotive-qualified AEC-Q100 audio amplifier delivering 3.1W into 3Ω at 5V. Features low 4mA supply current, -80dB PSRR, and fully differential design for reduced RF interference. Ideal for emergency calls, cluster chimes, and driver notifications. Available in 8-pin MSOP-PowerPAD package.

The TPA6205A1 is a 1.25W mono fully differential Class AB audio amplifier IC operating from 2.5V to 5.5V. Features low 1.7mA quiescent current, 90dB PSRR, and improved RF immunity. Ideal for wireless handsets and mobile devices. Available in compact QFN, MSOP, and BGA packages.

DirectPath stereo headphone amp eliminates DC-blocking capacitors. Drives 25mW into 16Ω with 2.1mA supply current. Features pop suppression, ±8kV ESD protection, and selectable gain. Ideal for smartphones and portable devices.

25W per channel stereo Class-D audio amplifier IC. Drives 4-ohm loads from 10V to 30V supply. No heat sink needed. Four selectable gain settings, thermal and short-circuit protection. Pin-compatible with TPA3120D2.

High-efficiency Class-D stereo audio amplifier delivering 2x30W into 8Ω at 24V. Features wide voltage range, AM avoidance, and integrated protection. Ideal for speaker bars, docks, and automotive audio. Thermally enhanced HTSSOP-32 package.

High efficiency 95% filter-free class-D audio amplifier delivering 3.2W output. Features 86dB PSRR, 1.5mA quiescent current, and 20μV noise floor. Ideal for portable devices. Includes short-circuit and thermal protection. Available in compact DSBGA package.

Delivers 6W per channel into 4Ω with fixed 20dB gain. Features mute/standby, thermal protection, and wide supply range 9.5V-18V. Available in thermally enhanced PowerPAD SOIC package for efficient heat dissipation and compact design.

Low-power push-pull comparator with integrated 1.242V reference. Features 5μA quiescent current, 200mV beyond-rail input range, and 6μs response. Ideal for battery monitoring and sensor systems. Available in SOT23-6 package.

Single-channel op amp with 1.8V to 3.6V supply, 8MHz GBW, and rail-to-rail I/O. Low offset of 250μV and 650μA supply current per channel. Ideal for battery-powered audio and portable applications.

The TLV2374IDR is a quad rail-to-rail input/output operational amplifier with 3MHz bandwidth and 2.4V/µs slew rate. Operating from 2.7V to 16V, it consumes only 550µA per channel. Ideal for battery-powered, industrial, and sensor applications. Available in compact TSSOP package.

Dual precision op-amp with low offset voltage (500 µV) and single-supply operation from 0°C to 70°C. Ideal for transducer interfacing, active filters, and battery-powered applications. ESD-protected up to 2000V. Available in SOIC-8 package.