Flash Memory IC Chip

The BQ29700DSET provides precise overcharge, over-discharge, and overcurrent protection for Li-Ion/Li-Polymer batteries. Features ±5mV OCP accuracy, zero voltage charging, and ultra-low 100nA shutdown current. Ideal for tablets, mobile handsets, and handheld terminals. Factory-programmed thresholds ensure reliable fault detection.

High-efficiency synchronous buck converter delivering 2.5A output with adjustable voltage down to 0.8V. Features no loop compensation, fast transient response, and stable with low-ESR ceramic capacitors. Ideal for industrial, automotive, and embedded systems. Available in thermally enhanced HTSSOP-20 package.

Dual synchronous buck controller with emulated peak current mode control. Wide 4.5V to 42V input range, programmable 750kHz switching, 3.3A peak gate drive, and 1.5% precision reference. Ideal for industrial DC-DC motor drivers and telecom servers. Available in 32-pin WQFN package.

High-performance hot-swap controller with PMBus interface for accurate power monitoring and protection. Features ±1% current accuracy, programmable fault thresholds, and remote temperature sensing. Ideal for server backplanes and base station systems.

Highly integrated linear charger IC for Li-Ion/Li-Pol batteries. Features 30V input rating, 1% voltage accuracy, thermal regulation, and programmable current. Ideal for smartphones, PDAs, and portable devices. Available in compact 2x2mm DFN-10 package.

High-efficiency synchronous step-down DC-DC converter with up to 95% efficiency. Supports 3.1V to 17V input, adjustable 1.2V to 16V output, and 1.5A output current. Features PFM/PWM modes, external clock sync up to 1.4MHz, and overcurrent protection. Ideal for 12V bus regulation.

High-efficiency synchronous step-down DC-DC converter with up to 94% efficiency and 500mA output. Features 2.05V to 6V input range, 22μA quiescent current, and small 1mm x 1.5mm USON package. Ideal for battery-powered portable devices and LDO replacement.

High-efficiency synchronous step-down DC/DC converter with 3V-17V input and 1A output. Features DCS-Control topology, 17μA quiescent current, and power save mode. Ideal for 12V rails and battery-powered systems.

High efficiency synchronous step-down DC-DC converter with 3V to 17V input range and 3.5A output. Features ±1% output voltage accuracy, 18μA quiescent current, and DCS-Control topology. Ideal for 12V rail supplies and multi-cell Li-Ion applications. Available in 3mm x 2mm VQFN package.

The TPS73501DRBR is a 500mA low-dropout linear regulator with 45μA quiescent current, 68dB PSRR, and 13.2μVRMS noise. Ideal for post-DC/DC filtering, IP cameras, and base stations. Stable with ceramic capacitors. Available in WSON-6 package.

High-precision LDO regulator with NMOS topology for low dropout and reverse leakage. Stable with or without capacitors. 0.5% initial accuracy, 30 μVRMS noise, and less than 1 μA shutdown current. Ideal for smart grid, medical, and wireless applications.

The TPS72301DBVR is a 200mA low-noise LDO voltage regulator with 60μVRMS noise and 65dB PSRR at 1kHz. It supports adjustable output from -1.2V to -10V, features 2% accuracy, thermal protection, and is stable with 2.2μF ceramic capacitors. Ideal for optical networking and noise-sensitive applications.

High-performance 350mA LDO with ultra-low 38μA quiescent current and 110mV dropout. Features 80dB PSRR, fast 140μs start-up, and built-in soft-start. Ideal for cameras, wireless LAN, and handheld devices. Available in compact DSBGA-5 and SON-6 packages.

Standalone USB Type-C and Power Delivery controller with BMC PHY, policy engine, and configurable source/sink modes. Supports 5-20V bidirectional switching, overcurrent protection, and alternate modes. UL recognized. Ideal for notebooks, docks, and adapters.

Integrated power management IC with three synchronous buck converters. Features 4.5V-18V input, 3A/2A/2A outputs, adjustable frequency up to 2.2MHz, and USB power switches. Compact 6x6mm QFN package with -40°C to 125°C operation.

Monolithic dual synchronous buck regulator with wide 4.5-18V input range. Delivers up to 2A and 3A output, 0.8V ±1% reference, adjustable 300kHz-1.4MHz frequency, and cycle-by-cycle overcurrent protection. Ideal for DTV, modems, and routers.

Single-chip PMIC for Intel processors, featuring 6 step-down regulators, I2C DVS control, and DDR memory support. Ideal for 2S-4S Li-ion battery and wall-powered designs in tablets, ultrabooks, and IoT applications.

High-efficiency buck-boost converter with seamless transition between modes. Supports 2.5V to 5.5V input, 0.5A continuous output. Features >90% efficiency, 2.5MHz switching, adjustable soft-start, and overtemperature protection. Ideal for battery-powered devices.

Precision monolithic RMS-to-DC converter with ±0.3mV accuracy. Features 200μA supply current, 10^12Ω input impedance, and wide ±16.5V supply range. Ideal for portable multimeters and battery-powered applications. Available in SOIC package.

Integrated power management IC with five buck converters up to 5.0A, 11 LDOs, USB OTG, battery charger, and RTC. Supports configurable power sequencing, low power consumption, and compact 5.21mm x 5.36mm WCSP package. Ideal for smartphones and tablets.