Flash Memory IC Chip

Compact 3mm x 2.8mm MicroSiP step-down converter with 3A output, 3V-17V input range. Features DCS-Control topology, power save mode, and 20μA quiescent current. Ideal for industrial, telecom, and SSD applications.

High-performance negative LDO regulator with -3V to -36V input, 200mA output, ultralow noise (15.1μVRMS), and 72dB PSRR. Ideal for precision analog, audio, and industrial applications. Features adjustable output, enable pin, and thermal protection.

Wide input voltage range LDO regulator delivering up to 450mA output with low 15μA quiescent current. Features power good with programmable delay, thermal shutdown, and overcurrent protection. Stable with ceramic capacitors. Ideal for smart grid, power tools, and motor drives.

High-performance 200mA LDO voltage regulator with 66dB PSRR at 1kHz and ultra-low 40μA quiescent current. Features 100mV dropout, 2% accuracy, and inrush current protection. Ideal for RF, wireless, and portable applications. Available in compact DSBGA package.

Ultra-low quiescent current LDO regulator ideal for battery-powered devices. Features 150mA output, 500nA IQ, 3% accuracy, thermal shutdown, and overcurrent protection. Available in TSOT23-5 and SON-6 packages. Compatible with TI MSP430.

Ultra-low quiescent current LDO regulator with 71mV dropout at 100mA. Features PMOS pass element for efficiency, standby mode at 1μA, and overcurrent protection. Available in fixed and adjustable outputs. Ideal for portable and battery-powered systems.

Ultralow 35-μA quiescent current LDO with 140-mV dropout at 250 mA. Stable with 4.7-μF capacitor. Features thermal shutdown, power-good indicator, and enable pin. Available in 8-pin SOIC. Ideal for battery-powered systems.

Ultralow 150nA supply current voltage supervisor for 0.9V to 6.5V systems. Features push-pull RESET output, valid reset down to 0.6V, and -40°C to 85°C range. Ideal for portable, battery-powered, and industrial equipment. Available in compact SOT23-3 package.

The TPS3823-33DBVR provides power-on reset and voltage supervision for DSPs and microcontrollers. Features a fixed 2.93V threshold, 200ms reset delay, watchdog timer, and low 15μA supply current. Ideal for industrial, automotive, and portable equipment. Available in a compact 5-pin SOT-23 package.

The TPS380x family provides precision supply voltage monitoring and power-on reset generation for DSPs and microcontrollers. Features 9 µA supply current, fixed delay times, and manual reset input. Available in ultra-small SC-70 package. Ideal for industrial, automotive, and portable equipment.

The TPS3510DR integrates overvoltage and undervoltage protection for 3.3V, 5V, and 12V supplies. Features open-drain fault and power good outputs, 300ms delay, and wide 4V to 15V input range. Ideal for PC power supply systems with minimal external components.

Ultra-small 1.45mm x 1.00mm SON package. Low 250nA supply current. Single push-button input with user-selectable delay. Fixed 400ms reset pulse. Open-drain output. Ideal for smartphones, tablets, and portable devices. Operating range -40°C to +125°C.

TPS3125J18DBVR power distribution IC with 2.5-6.5V input, 5.5A current limit, and 13mA supply current. Features power-on reset, manual reset, watchdog timer, and SOT23-5 package. Ideal for DSPs, microcontrollers, portable devices, and industrial equipment. Operating temperature -40°C to +85°C.

Compact eFuse power MUX with 42-mΩ RON, adjustable 0.6A-5.3A current limit, reverse blocking, and programmable dVo/dt. UL 2367 recognized. Ideal for power path management, redundant supplies, and PCIe cards.

Integrated hot swap power management IC with programmable fault current and timer. Supports 3-20V bus operation and 0-5A current. Features internal MOSFET power limiting, latch-off on fault, and UL2367 recognition. Ideal for RAID, telecom, and SSD applications.

Single-chip protection solution for 5V/9V/12V USB VBUS lines. Features 30V DC overvoltage protection, precision clamp, low RON nFET switch, and IEC 61000-4-2/4-5 transient protection. Ideal for cell phones, tablets, and portable media players.

The TLV809K33DBZR is a 3.3V supervisory IC with 200ms power-on reset delay. It monitors supply voltage and ensures reliable system reset for DSPs, microcontrollers, and industrial equipment. Features 9μA supply current, -40°C to +85°C range, and pin-compatible with MAX809 in a compact SOT-23-3 package.

High efficiency synchronous step-down converter with 3-17V input, 3A output, and 19μA quiescent current. Features DCS-Control topology, adjustable output from 0.9V to 5.5V, soft start, and power good. Ideal for 12V rails and battery-powered systems in compact VQFN-16 package.

High efficiency synchronous step-down converter with up to 98% efficiency and 20 μA quiescent current. Supports 0.8V to VIN adjustable output, 1.4 MHz switching frequency, and power save mode. Ideal for battery-powered applications, distributed power supplies, and SSDs. Available in 3mm x 3mm VQFN package.

High-efficiency synchronous step-down converter with up to 95% efficiency and 17-μA quiescent current. Supports 2.5V to 6.0V input, adjustable output from 0.8V to VIN. Features DCS-Control topology, power save mode, and hiccup short-circuit protection. Available in 2mm × 2mm VSON package. Ideal for battery-powered and point-of-load applications.