Display Driver ICs

SN74LV244ADWR octal buffer/line driver operates from 2V to 5.5V. Features high drive current, low power consumption, and robust ESD protection. Ideal for industrial automation and communication systems.

Low power RS485/RS422 transceiver with 300µA typical supply current. Features thermal shutdown, glitch-free driver outputs, and 70mV input hysteresis. Supports up to 32 transceivers on the bus. Ideal for industrial multipoint data transmission.

The L6228 is a fully integrated DMOS stepper motor driver with 2.8A peak output and 0.73Ω RDS(on). It features non-dissipative overcurrent protection, dual PWM current controllers, and fast/slow decay mode. Ideal for bipolar stepper motor applications requiring high efficiency and reliability.

High-voltage half-bridge gate driver with 600V floating channel, 2A source/3A sink output. Features integrated desaturation detection, soft over-current shutdown, and undervoltage lockout. Ideal for power switching applications requiring robust short circuit protection and low quiescent current. Lead-free and customizable.

High-speed 2-channel RS-232 transceiver operating from single 3.3V supply. Supports data rates up to 460 kbps with 0.1μF charge pump capacitors. Meets EIA-232E specs. Ideal for portable instruments, printers, and PDAs. Available in multiple package options.

High-speed Si-gate CMOS octal transceiver with non-inverting 3-state outputs. Features bidirectional bus interface, ESD protection up to 2000V HBM, and wide operating temperature range from -40°C to +125°C. Ideal for industrial and automotive applications.

Dual-channel smart high-side power switch with 30mΩ on-resistance per channel. Features integrated current sense, short circuit and overload protection, thermal shutdown, and reverse battery protection. Ideal for 12V/24V resistive, inductive, and capacitive loads. Replaces relays and fuses.

SN7407DR hex buffers/drivers with open-collector high-voltage outputs convert TTL to MOS levels. Features 30V breakdown, 40mA sink current, and input clamping diodes. Ideal for driving relays, lamps, and high-current loads. Compatible with most TTL circuits.

These TTL hex inverter buffers/drivers feature high-voltage open-collector outputs for interfacing with MOS circuits or driving lamps and relays. Available in 30V (SN5406/SN7406) and 15V (SN5416/SN7416) versions with sink current up to 40mA. Ideal for industrial and high-reliability applications.

High-speed CAN controller interface IC fully compatible with ISO 11898. Supports up to 1 Mbaud, features slope control for reduced RFI, thermal protection, and short-circuit proof to battery and ground. Ideal for automotive and industrial high-speed applications.

High voltage 3-phase bridge driver IC for MOSFET/IGBT. Features 600V offset, undervoltage lockout, over-current shutdown, and matched propagation delays. Ideal for motor control and power inverters. Available in PLCC32 package.

High-performance octal buffers and line drivers with 3-state outputs. Operates from 4.5V to 5.5V, drives up to 15 LSTTL loads, low power consumption (80 µA max ICC), and TTL-compatible inputs. Ideal for bus lines and memory address drivers.

Low power CMOS RS-485 transceiver with automatic sleep mode reducing ICC to 10 µA. Features thermal shutdown, wide common mode range -7V to +12V, and supports up to 128 nodes. Ideal for power-conscious multipoint data transmission. Drop-in replacement for LTC485, MAX485.

Three drivers and five receivers with ±15kV ESD protection. Operates from 3V to 5.5V supply with low 1µA standby current. Supports data rates up to 1Mbps. Includes auto-powerdown and always-active ROUT2B output. Ideal for battery-powered systems and portable equipment.

The A4988 is a complete microstepping motor driver with built-in translator, supporting full to 1/16 step modes. Features low RDS(ON) outputs, automatic decay mode selection, and overcurrent protection. Ideal for bipolar stepper motors up to 35V and ±2A.

High-speed differential bus transceiver for RS-485/422. Operates at up to 35 MBaud from a single 5V supply. Features 5 ns skew, wide common-mode range, and low bus loading. Ideal for multipoint data communication. Available in stock.

The TL3695P is a bidirectional differential bus transceiver IC designed for RS-485/RS-422 multipoint communication. Features high-speed low-power Schottky circuitry, thermal shutdown protection, ±60 mA driver output, and wide common-mode voltage range. Ideal for noisy industrial environments.

The SN75179BP is a differential driver and receiver pair for balanced transmission lines, compliant with RS-422, RS-485, and V.11. Features include ±200 mV receiver sensitivity, thermal shutdown protection, and single 5-V supply operation. Ideal for full-duplex data communications over long bus lines.

High-performance octal buffer and line driver with 3-state outputs. Wide 2V to 6V operating range, low 80µA max ICC, and 10ns typical propagation delay. Drives up to 15 LSTTL loads. Ideal for bus line driving and PCB layout optimization.

High voltage single channel driver for MOSFET and IGBT up to 600V. Features floating bootstrap operation, 10-20V gate drive range, undervoltage lockout, and CMOS compatible inputs. Lead-free option available. Ideal for robust industrial power applications.