Display Driver ICs

High-speed non-inverting 3-state quad buffer IC with 13ns propagation delay and 2-6V operating range. Features low power CMOS technology, high drive current, and fanout of 15 LS-TTL loads. Ideal for bus driving and circuit board applications.

Single-chip IEEE 802.3u compliant PHY transceiver with MII/RMII interfaces. Features low power CMOS design (

Medium frequency H-Bridge N-Channel MOSFET driver IC operating up to 80V with 1.25A peak current. Features programmable dead time, shoot-through protection, and undervoltage lockout. Ideal for PWM motor control and UPS applications. Available in SOIC and DIP packages. RoHS compliant.

The L6386D is a high-voltage driver IC for power MOS or IGBT, featuring 600V rail capability, 400mA source/650mA sink current, and integrated bootstrap diode. It offers dV/dt immunity of ±50 V/ns, CMOS/TTL inputs, and undervoltage lockout for reliable performance in industrial applications.

High-speed RS-232 driver/receiver IC with 200 kB/s transmission rate. Operates on single 5V supply with 0.1µF capacitors. Features two drivers and two receivers, shutdown and enable functions. Industrial temp range -40°C to +85°C. Pin compatible with MAX222/MAX232A/MAX242.

The BTS7700GNUMA1 integrates a double high-side and two low-side DMOS switches in a single P-DSO-28-14 package. Configurable as H-bridge or quad-switch for DC motor management. Features 110mΩ/90mΩ Rds(on), 40V operation, 9A peak current, short-circuit protection, and PWM up to 50kHz.

Original SP3203ECY-L RS-232 transceiver features 3 drivers and 2 receivers, operates from 3.0V to 5.5V. Includes logic selector for mixed-voltage systems and 15kV ESD protection. Ideal for portable devices like PDAs and cell phones.

Original SP3077EEN-L transceiver for RS485/RS422 with ±15kV ESD protection, 3.3V low-power operation, and failsafe protection. Supports up to 256 nodes on bus, 16Mbps high speed, and industrial temperature range. Ideal for industrial control and building automation.

3.3V low power RS-485/RS-422 transceiver with ±15kV ESD protection. Supports half- and full-duplex communication on multipoint buses. Features 1/8 unit load for up to 256 nodes and true fail-safe receiver inputs. Ideal for industrial data transmission.

High-speed 25Mbaud differential driver and receiver pair for RS485/422. Features thermal shutdown, ±60mA driver output, and low 30mA supply current. Operates from single 5V supply with glitch-free power-up protection. Ideal for multipoint bus communication.

The MAX485CSA is a low-power RS-485/RS-422 transceiver IC operating from a single 5V supply. It supports data rates up to 2.5Mbps with slew-rate-limited drivers to minimize EMI. Features thermal shutdown, short-circuit protection, and fail-safe receiver input. Ideal for industrial control networks and EMI-sensitive applications.

The U209B-M is a monolithic integrated control circuit board designed for feature phones, answering machines, and fax machines. It integrates speech circuit, tone ringer, DC/DC converter, and voice switch for handsfree operation. Features adjustable gain, anti-clipping, and automatic line loss compensation. Ideal for OEM applications requiring reliable analog signal processing.

High-speed octal bus transceiver with 3-state outputs for bidirectional data flow. TTL-voltage compatible inputs, latch-up performance exceeds 250 mA, and ESD protection up to 2000-V. Ideal for industrial control and LED driver circuits.

High voltage half-bridge driver for MOSFET/IGBT, operational to 600V with 10V-20V gate supply. Features floating bootstrap, cross-conduction prevention, and programmable deadtime up to 5µs. RoHS compliant, ideal for industrial power supplies and motor control.

The MAX3491EESD+ is a 3.3V low-power RS-485/RS-422 transceiver supporting data rates up to 12Mbps. Features ±15kV ESD protection, thermal shutdown, and fail-safe receiver. Ideal for industrial communication. Available in SOP-8 package.

High-reliability BiCMOS/DMOS driver with 3A peak output, 4.5V-18V range, and latch-up protection. Ideal for driving power MOSFETs, capacitive loads, and fast switching. Custom options available.

Industrial RS-485/J1708 transceiver with ±60V fault protection and ±15kV ESD. Supports 10Mbps data rate, hot-swap capability, and up to 128 nodes on a bus. Ideal for telecom, automotive, and industrial networks. Available in SOP-8 package.

The CD4060BM96 integrates a 14-stage ripple-carry binary counter with an oscillator, supporting RC or crystal configurations. Fully buffered inputs and outputs with Schmitt trigger action ensure reliable operation. Ideal for timing and frequency division applications. Supplied in a 16-lead SOIC package.

High peak output current of 3A drives 1800 pF loads in 25 ns. Wide 4.5V to 18V supply range, short delay times, and latch-up protection up to 1.5A. Ideal for switch mode power supplies and line drivers. ESD protected 4 kV.

MAX3232EIPWR multichannel RS-232 line driver/receiver with ±15kV ESD protection. Operates from 3V to 5.5V supply, supports up to 250 kbit/s. Includes two drivers and two receivers. Ideal for industrial communication interfaces.