Hard Facing Rod & Powder

Stellite 6 Polystel 6 Hoganas 2537 Hard Facing Rod Red Color Extrusion Screws Flights Tong Bits Product Description WL-Co6 is the most widely used of the wear resistant cobalt-based alloys and exhibits good all-round performance. It is regarded as the industry standard for general-purpose wear resistance applications, has excellent resistance to many forms of mechanical and chemical degradation over a wide temperature range, and retains a reasonable level of hardness up to

Colmonoy 4 Welding Rod - Nickel Based Alloy Hard Facing Rod High Temperature Valve Valve Sealing Product Description WL Allotech NiCrBSi 4 rod offers superior wear protection, retaining its hardness up to 600ºC (1000ºF) with significant resistance to oxidation, and it offers outstanding metallurgical and physical properties making them ideally suited to solving wear mechanisms such as abrasion, erosion, corrosion and high-temperatures encountered in service. Hardness: 36

Stellite 190 Welding Rod - Cobalt Based Alloy Hard Facing Rod Gouge Type Bearing Sleeve Drill Head Product Description Cobalt 190 is a highly abrasion-resistant alloy, primarily used for the hardfacing of bearing journals in tricone rotary rock bits used in the Oil and Gas Industry. Tricone bits operate in hot and extremely abrasive downhole conditions. Due to the high proportion of carbides, which provide the abrasion resistance, care must be taken to minimize cooling

Colmonoy 6 Welding Rod - Nickel Based Alloy Hard Facing Rod Die Pressure Valves Corrosion Resistant Coating Product Description WL-NiCrBSi 60 is a hard nickel based alloy with excellent wear resistance, high temperature hardness, and corrosion re-sistance. It is available in rod and powder forms, giving abrasion and corrosion resistant deposits, which can be ground, but is not machinable. NiCrBSi 60 has a very dense corrosion resistant coating with superior fusing characteris

Colmonoy 5 Welding Rod - Nickel Based Alloy Hard Facing Rod High Temperature Valve Valve Sealing Product Description WL-NiCrBSi 50 is a hardfacing alloy for application by welding and the spray-fuse and powder-weld processes. It is machinable, and produces very hard dense corrosion resistant coatings with superior fusing characteristics. Should be considered where mild impact is possible, as it has lower crack sensitivity than WL-NiCrBSi60. This is necessarily achieved by

Eatonite 6 Rod For Hard Surfacing To Engine Valve Face Steam Turbine Blade Iron And Steel Industry Product Description WL Fe-2537 rod is wide used like cobalt and nickel based rod, high abrasive resistance, widely used in iron and steel industry, coal industry, shaft, oil and other energy industries of the scraper, cylinder type, wear plates, tubes, rods and other large welding and cladding. Hardness: 38-44HRC Chemical Composition(%) C Si B Mo Cr Mn Ni Fe 2.2 1.3 / 4.5 30.5 0

Stellite 21 Cobalt Based Alloy Hard Facing Rod AWS 5.21-2001 ERCoCr-E Hot Forging Die Various Liquid Valves Product Description WLCo 21 is recommended for applications involving cavitation, erosion, corrosion and/or high temperatures, such as valve trim for petrochemical and power generation. Due to its good impact resistance, it has been widely used in the building up of forging or hot stamping dies. Common Names: Stellite 21 Polystel 21 Standard: AWS 5.21-2001 ERCoCr-E

Colmonoy 6 Ni60 Rod Hard Facing Rod Nickel Based Alloy Metal Color Automotive Wood&Timber​ Product Description WL-Ni 60 is a hard nickel based alloy with excellent wear resistance, high temperature hardness, and corrosion re-sistance. It is available in rod and powder forms, giving abrasion and corrosion resistant deposits, which can be ground, but is not machinable. WL-Ni 60 has a very dense corrosion resistant coating with superior fusing characteristics. Fusion of the

Product Description: Hard Facing Rod is a special type of cobalt welding rod designed for high wear resistance. It is colored red and available in diameters ranging from 2.5mm to 8.0mm. It is designed to meet international welding current standards, and is suitable for processing temperatures between 1285-1410ºC. It is a reliable and durable hardfacing rod that provides excellent wear resistance for all types of welding applications. The cobalt Hard Facing Rod provides

Product Description: Hard Facing Rod is a cobalt-based welding rod that is specifically designed for hardfacing applications. It is also known as Bishilite 6 or ERCoCr-A rod. This hardfacing rod is available in various diameters from 2.5mm to 8.0mm and is capable of withstanding temperatures from 1285-1410 ºC. The manufacturing process for Hard Facing Rod is done through various welding techniques such as PTA, Laser Cladding, HVOF, Plasma Spray and 3D Printing. The quality of

Product Description: Hard Facing Rod with High Wear Resistance Our Hard Facing Rod is a cobalt welding rod, ERCoCr-A, with stellite 6 rod characteristics, which is designed to provide superior wear resistance. It has a hardness of HRC 40-46 and is available in a red color. It has a diameter of 2.5-8.0mm and can be processed with PTA / Laser Cladding / HVOF / Plasma Spray/ 3D Printing. The Hard Facing Rod provides excellent abrasion resistance and impact resistance, and it is

Product Description: Hard Facing Rod is a kind of rod made of cobalt alloy, featured by high wear resistance and hardness up to HRC40-46. It is colored red and can be welded with international standard welding current. The material used in making this Hard Facing Rod is Stellite 6 RED, a cobalt alloy that is ideal for hardfacing applications due to its excellent wear resistance. It is a reliable solution for applications that require superior abrasion and corrosion resistance

Product Description: ERCoCr-A Hard Facing Rod is a cobalt 6 rod which is made of stellite 6 RED material, with a length of 350mm, 500mm, 1000mm, 2000mm, 3000mm and 4000mm. It has excellent wear resistance and can withstand high temperatures, making it the ideal choice for high temperature valves, engine valves, turbine blades, etc. Our hard facing rod is certified by Mill-certificate and comes in a vibrant red color. ERCoCr-A hard facing rod is the best solution for

Bishilite 1 Rod 2.5-8.0mm Mill-Certificate For Pump Sleeves Product Description: Hard Facing Rod is a wear-resistant alloy, designed to be used in applications that require resistant to wear and abrasion. It is made of ERCoCr-C, Stellite 1 black, Stellite 1 rod, Stellite 6 rod, Stellite 12 rod and other hardfacing materials. It is available in different lengths (350mm, 500mm, 1000mm, 2000mm, 3000mm, 4000mm) and hardness (HRC 50-60). Hard Facing Rod is produced through PTA,

Cobalt 1 Rod 2.5-8.0mm Diameter for Industrial Use Product Description: Hard Facing Rod is a specialized product used in a variety of applications, such as valve seat insets, bearing, sawteeth, rotary ring, and pump sleeves. It is available in rod shape with a standard of ASME/AWS: 5.21 ERCoCr-C. It is made with a variety of processes, such as PTA, laser cladding, HVOF, plasma spray, and 3D printing. The rod is usually black in color, and is commonly made of stellite 1 black

Product Description: Hard Facing Rod is a product used for many applications such as Valve Seat Insets, Bearing, Sawteeth, Rotary Ring, and Pump Sleeves. It is made of high quality Stellite 1 black and cobalt welding rod, and has a rod-shaped structure. This product is tested and certified by mills to ensure its hardness in HRC 50-60. It is available in various lengths such as 350mm, 500mm, 1000mm, 2000mm, 3000mm, and 4000mm. Hard Facing Rod is widely used for its excellent

Black Hard Facing Rod ASME/AWS 5.21 ERCoCr-C With International Standard Welding Current Product Description: Hard Facing Rods are specially designed cobalt-based welding rods made from stellite 1 black alloy, which is a combination of cobalt-chromium-tungsten-carbon. These rods are widely used for hardfacing applications such as valve seat insets, bearings, sawteeth, rotary rings and pump sleeves. They come with a mill certificate and are processed with PTA, Laser Cladding,

Product Description: Hard Facing Rod is made of Cobalt material, which is featured with high wear resistance, hardness of HRC 50-60 and Mill-certificate test report. It is produced through PTA, Laser Cladding, HVOF, Plasma Spray or 3D Printing process. It is also known as cobalt welding rod, Bishilite 1 rod, stellite 1 black rod, hard facing rod. It is widely used in many industries, such as automobile, shipbuilding, aerospace, rail transportation, mining machinery,

Cobalt Hard Facing Resin Hoganas 2637 For Machineability With Carbide Tools Product Description: Weartech WT-6 Co6 Hardfacing Powder is a superior hardfacing powder packaged in a bottle. It is a dark gray powder that can increase the hardness of engine valves, turbine blades, and other parts to 40-46 HRC. It is highly wear-resistant and offers excellent protection against abrasion and corrosion. This hardfacing powder is easy to use and provides superior protection against

High Hardness Co6 Hardfacing Powder For Industrial Use Product Description: Hard Facing Powder is a high-performance hard coating material made of premium cobalt. It is ideally suited for a wide range of applications such as engine valves, turbine blades and other components that require a strong surface for abrasion and wear protection. This powder is specifically designed for PTA, Laser Cladding, HVOF, Plasma Spray and 3D Printing processes. Our Hard Facing Powder is