Thermal Spray Wire

FeAl Cored Wire TAFA 35MXC Heating Resistance Wire Thermal Spray Wire Metal Wire Alloy Wire Product Description FeAl (P) is a cored wire specifically designed for arc spray systems. It produces a well bonded coating with high hardness. It has the unique ability to produce either smooth or very rough profile coatings for non-slip applications. FeAl (P) coatings have excellent machinability. Typical applications include non-slip coatings for walkways and stairs, gripping rolls

NiCr80/20 Thermal Spray Wire Nickel Alloy Wire TAFA 06C Elements Oxidation Resistance Wear Resistant Alloys Product Description NiCr80/20 nickel-chromium system shows that chromium is quite soluble in nickel. This is a maximum at 47% at the eutectic temperature and drops off to about 30% at room temperature.Arange of commercial alloys is based on this solid solution. Such alloys have excellent resistance to high temperature oxidation and corrosion and good wear resistance.

NiCrAl (P) Wire Nickel Base Alloy Tafa 73MXC Metal Wire Nickel Alloy Wire Oxidation Resistance Arc Thermal Spray Product Description WL NiCrAl(P) is a cored wire specifically designed for arc spray systems. It produces a self-bonding nickel-chromium-aluminum deposit with excellent high temperature oxidation and corrosion resistance. NiCrAl(P)can be used for dimensional restoration of parts and is widely used in aircraft repair market. The coating can be used as an undercoat

Tin Wire Tafa 02W Thermal Spray Wire Sn Alloy Wire Flame Spray Arc Spray Metal Wire Product Description WL Tin wire is a pure tin (99.9% minimum purity) wire specifically designed for spraying in arc spray and flame spray systems. It produces dense, well-bonded coating sparticularly applicable for electrical conductivity applications. Equivalent to:TAFA02W,Sulzer Metco Tin, PMET549. Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease,

FeCrAl TAFA Alcro Thermal Spray Wire Metal Wire Machine Element Repair And Restoration Product Description FeCrAl is a high-resistivity iron-chromium-aluminium alloys for use up to 1400º C (2550º F). With the well-bonding coating and high temperature oxidation resistance.So they can use in variety of industry. Equivalent to: TAFA Alcro, PMET731. Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated.

NiAl 95/5 Wire Thermal Spray Coating Wire Tafa 75B Thermal Spray Wire Arc Wire Spray Or Combustion Wire Spray Product Description NiAl 95/5 is a solid thermal spray wires, It can be use as bond coatings and for machine element restoration widely. The materials show an exothermic reaction during the spray process, Also can produce dense coatings with exceptionally high bond strengths that self-bond to most metallic substrates and can tolerate elevated temperatures and

Pure Al 1100 TAFA 01T Thermal Spray Wire Aluminum Thermal Spray Wire Metal Wire Aluminum Casting Repair Product Description Pure Aluminum has high electricity conductivity and good heat dispersing performance, especially for the winding wire for transferring high frequency signal, such household appliances as degaussing coil, high frequency transformer, common transformer and small electric motor etc. Equivalent to: TAFA 01T, Sulzer Metco Aluminum Surface Preparation Surface

ZnAl 85/15 TAFA 02A Thermal Spray Wire Zinc&Aluminum Thermal Spray Wire Atmospheric Corrosion Protection Product Description ZnAl85/15 has good corrosion resistance than either pure Zinc or Aluminum, by combining the advantages of both materials. It is used for corrosion protection in both atmospheric and marine environments. Equivalent to: TAFA 02A, Metco Zn/Al. Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the

Thermal Spray Wire Al Bronze Tafa 10T Sprabronze AA PMET 590 CuAl10 For Arc Spraying Product Description CuAl 10 is an iron-bearing Copper Aluminium MIG & TIG filler metal primarily designed for joining aluminium bronze, silicon bronze and manganese bronze, some high strength Copper-Zinc and Copper-Nickel alloys as well as many ferrous metals such as steel, Cast iron and galvanized iron. It is also good for joining dissimilar metals such as cast iron, carbon steels, copper,

LCr Carbide (P) Cored Wire TAFA 98 MXC Thermal Spray Wire Alloy Wire Food Processing Paper Processing Metal Wire Product Description LCr Carbide (P) is a cored wire specifically designed for arc spray systems. It produces a hard, well bonded coating that is abrasive and corrosion resistant. LCr Carbide (P) can be easily machined with carbide tools, yielding a smooth, low coefficient of friction surface finish, suitable for a number of applications. Equivalent to: TAFA 98 MXC,

AlMnMg 5 Thermal Spray Wire Aluminum Welding Structural Steels Metal Wire Pressure Vessels Product Description AlMnMg5 is a general-purpose type aluminum thermal spray wire that contain 5% magnesium additives, resulting in high intensity, favorable corrosion resistance and excellent color compatibility after anodizing. Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to

Pure Copper Wire Thermal Spray Wire For Seawater Desalting And Ship Building Decorative Coating Product Description Pure COPPER, coatings give good electrical conductivity, used for RFI/EMI shielding and reclamation of mis-machined parts. Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.Recommended method of preparation is, to grit blast

Inconel 718 Sulzer Metco 8718 Nickel Base Alloy Wire Thermal Spray Wire Heating Resistance Wire Cryogenic Storage Product Description Inconel 718 is a nickel super alloy frequently used for cryogenic storage tanks,turbines, down hole shafting and well head parts. High tolerance to extremely high and low temperatures allow Inconel 718 to be welded and annealed into products that will withstand extreme conditions. Other uses include jet rocket, nuclear fuel, and pump body

Alloy C-276 Tafa 77T Nickel Base Alloy Wire Thermal Spray Wire Metal Wire Corrosion Resistant Materials Deposit Rate Product Description Alloy C-276 nickel alloy is one of the premier corrosion resistant materials that performs exceptionally well in both oxidizing and reducing environments. It resists chloride stress corrosion cracking, pitting, crevice and general corrosion. The alloy is also resistant to carbide precipitation during welding enabling it to be utilized in the

Pure Al 99.5 TAFA 01T Aluminum Electrical Wire Thermal Spray Wire Small Electric Motor Metal Wire Thermal Spray Wire Product Description Pure Aluminum has high electricity conductivity and good heat dispersing performance, especially for the winding wire for transferring high frequency signal, such household appliances as degaussing coil, high frequency transformer, common transformer and small electric motor etc. Equivalent to: TAFA 01T, Sulzer Metco Aluminum Surface

AlMg 5 Metco AlMg Aluminum Thermal Spray Wire Welding Structural Steels Pressure Vessels Automobile Metal Wire Product Description AlMg5 is a general-purpose type aluminum thermal spray wire that contain 5% magnesium additives, resulting in high intensity, favorable corrosion resistance and excellent color compatibility after anodizing. Equivalent to: Metco AlMg Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the

Metco Pure Zinc 99.995% TAFA02Z Thermal Spraying Wire 1.6mm 2.0mm 3.17mm Atmospheric Corrosion Protection Product Description Zinc is 99.99% pure, and is not contaminated in the arc spray process. Zinc alloy wire sprayed coatings are integral steps in the manufacture of various electronic, capacitor, automotive, heat exchange and tube & pipe products. Thermal spray Zinc based alloy wire coatings are also used in the Corrosion protection of bridges, locks & dams, above ground

CuAl9Ni5 Thermal Spray Wire Alloy Wire Metal Wire Spray Wire Propellers Bearing Weights Vlaves Pumps Pipe Systerm Product Description CuAl9Ni5 is used to join and repair wrought and cast nickel aluminium bronze materials. It is best for the fabrication or repair of ship fittings and propellers, and other components subject to salt and brackish water. Surface Preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be

CuAl8Ni2 Thermal Spray Wire Good Resistance To Corrosion Metal Wire Alloy Wire Aluminium Bronze Alloy Product Description CuAl8Ni2 is recommended for the overlying of copper-aluminium alloys, Aluminium coated steel in machinery and chemical industry as well as for iron welding in shipbuilding. Also excellent for the welding of brass tube and copper-aluminium that requires resistance to erosion. Surface Preparation Surface should be clean, white metal, with no oxides (rust),

ZrO2 Ceramic Rod Thermal Spray Thermal Insulation Ring Wear-Resistant High-Precision Ceramic Shaft Product Description Zirconia ceramics is a very good ceramic material which is highly crack propagation resistant.It also has low thermal conductivity and high strength of these two outstanding performance, it is often used to make metallized ceramic. Surface Preparation Surface should be clean, white, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note