PLC Modules

Foxboro P0400DAFBM1 Input Module The Foxboro P0400DAFBM1 is a high-precision analog input module for the I/A Series control system. It features eight isolated channels, each with 16-bit resolution and support for 4-20 mA and 0-10 V signals, ensuring accurate data acquisition from field sensors. Designed for harsh industrial environments, the module provides channel-level diagnostics, 2 kV electrical isolation to prevent interference, and hot-swappable operation for maintenanc

Foxboro FEM100 Fieldbus Expansion Module The Foxboro FEM100 is an expansion module designed to increase the capacity of the FCP270 field control processor. It adds four expanded fieldbus channels, allowing the FCP270 to connect to up to 128 200 Series (or equivalent) Fieldbus Modules (FBMs). Installed on a modular DIN‑rail baseplate (available in two‑slot or four‑slot configurations), the FEM100 supports high‑speed 2 Mbps HDLC communication and includes redundancy to minimize

Foxboro FCP270 Field Control Processor The Foxboro FCP270 is a field-mounted, optionally fault-tolerant controller designed for distributed process control. It performs regulatory, logic, timing, and sequential control together with connected Fieldbus Modules (FBMs), and handles data acquisition, alarm detection, and notification. The FCP270 connects to the Foxboro Evo network via 100 Mbps fiber optic Ethernet. In its fault-tolerant configuration, two processor modules work

Foxboro FCM10E Redundant Fieldbus Communication Module The Foxboro FCM10E is a reliable communication module for the I/A Series control system. It converts between Ethernet (10 Mbps) and fieldbus (2 Mbps) signals and works in pairs to provide backup if one module fails. Designed for tough industrial conditions, it supports multiple fieldbus types and can connect up to 30 fieldbus modules. Technical Specifications Product Type Redundant Fieldbus Communications Module Mounting

Foxboro FCM100ET PO926GS Redundant Fieldbus Communications Module The Foxboro FCM100ET PO926GS is a communication module for the I/A Series DCS, connecting Ethernet and fieldbus networks. It provides fast and reliable data transfer, supports redundancy with automatic switchover, and can transmit signals up to 2 km. Designed for easy installation and maintenance, it is widely used in industries such as power and chemical processing. Technical Specifications Product Type

FOXBORO FBMSVH Station Bus Master Module The Foxboro FBM241C is a compact I/O module engineered for industrial automation systems. It supports multiple signal types and provides flexible expansion capabilities in a high-density, space-efficient design. With an extensive operating temperature range and integrated Modbus communication, this module delivers reliable data acquisition and control for demanding industrial applications. Ideal for enhancing system integration and

Foxboro FBM241 PLC I/O Module The Foxboro FBM241C is a compact I/O module designed for industrial automation systems. It supports multiple signal types and offers flexible expansion capabilities in a small, high-density design. With a wide operating temperature range and built-in Modbus communication, this module provides reliable data acquisition and control for demanding industrial environments. Ideal for improving system integration and enhancing production efficiency.

Foxboro FBM241 PLC I/O Module The Foxboro FBM241 is a compact and flexible I/O module designed for industrial automation systems. It supports redundant configurations for high availability and is fully configurable through software, simplifying setup and reducing wiring complexity. Compatible with FBM247 technology, it handles a wide range of signal types and allows per‑channel configuration to adapt to diverse application needs. With a rugged design, low power consumption,

Foxboro FBM237 - 8-Channel Isolated Analog Output Module The Foxboro FBM237 is an 8-channel analog output module designed for industrial automation. Each channel delivers a 0-20 mA DC signal with galvanic isolation and supports both single and redundant operation. Suitable for harsh environments (Class G3), it features dedicated termination assemblies for local or remote wiring and is compatible with HART communication. The module can also be used with an Output Bypass

Foxboro FBM233 Redundant Field Device System Integration Module The Foxboro FBM233 is a robust and modular system integration module for the I/A Series control system, designed to connect field devices to the control network via Ethernet. It supports multiple industrial protocols and is built to operate in harsh environments with a wide temperature range, IP67/NEMA 4X protection, and dual power inputs. Its redundant architecture ensures seamless failover, while modular DIN

Foxboro FBM224 - Modbus Communication Interface Module The Foxboro FBM224 enables connectivity between Modbus-enabled devices and the Foxboro control system. It acts as an interface for Modbus RTU slave devices—such as PLCs and field I/O—allowing them to communicate with Foxboro Evo or I/A Series control processors. The module supports RS‑232, RS‑422, and RS‑485 communication standards and can be installed in hazardous industrial locations with the appropriate termination

FOXBORO FBM219 8-Channel Thermocouple/mV Input Module for Industrial Temperature Monitoring The FOXBORO FBM219-239 is an 8-channel temperature input module designed for industrial monitoring applications. It directly connects to common thermocouple types and includes built-in temperature compensation for reliable measurements. With isolated channels to prevent interference, it is engineered for demanding environments such as power plants, refineries, and metal processing

Foxboro FBM217 32-Channel Isolated Digital Input Module The Foxboro FBM217 is a 32-channel discrete input module designed for the Foxboro I/A Series Distributed Control System (DCS). Engineered for demanding industrial environments, this module reliably interfaces with field devices including switches and sensors, converting voltage or contact signals into processable control system data. Each channel features 1500 VRMS electrical isolation to prevent interference, and the

Foxboro FBM207C 16-Channel Voltage Monitor / Contact Sensing Module The Foxboro FBM207C is a voltage monitor and contact sensing input interface module designed for the Foxboro I/A Series Distributed Control System (DCS). It monitors a wide range of voltage signals and contact statuses from the field, converting them into digital data for processing by the control system. As an enhanced version of the FBM207 module, it delivers high reliability and versatile performance for

Foxboro FBM207B 16-Channel Isolated Input Module for I/A Series The Foxboro FBM207B is a 16-channel isolated input module designed for reliable signal acquisition in harsh industrial environments. Part of the I/A Series, it handles a wide range of sensor signals (current, voltage, resistance) with high accuracy. Its advanced channel isolation prevents ground loops and electrical noise, ensuring stable data transmission. Compact and durable, the module supports standard

Foxboro FBM207 Series - 16-Channel Voltage Monitor / Contact Sensor Module The Foxboro FBM207 series offers flexible discrete input monitoring with 16 isolated channels. The standard FBM207 accepts DC voltage inputs, while the FBM207b and FBM207c models support contact or solid-state switch inputs. Suitable for harsh industrial environments, the modules handle various voltage levels—from 60 VDC to 240 VAC—through termination assemblies that provide optical isolation and

Foxboro FBM206 Series – Pulse Input Module for Speed & Flow Monitoring The Foxboro FBM206 series includes two industrial pulse signal monitoring and control modules designed for speed and flow measurement applications. The FBM206 provides eight pulse input channels for speed or flow sensors, while the FBM206b offers four pulse inputs and four analog outputs for integrated control tasks. Both modules support input signals up to 25 kHz, feature galvanic isolation, and are

Foxboro FBM205 - 4-Channel Redundant Analog I/O Module with HART Support The Foxboro FBM205 is a rugged analog I/O module featuring four isolated input and four isolated output channels for 0-20 mA DC signals. Designed for harsh industrial environments, this module supports HART communication and can be paired for redundancy. It offers configurable fail-safe actions, delivers high accuracy through sigma-delta conversion, and simplifies field wiring with compatible termination

Foxboro FBM204 - Multi-Function Isolated I/O Module The Foxboro FBM204 is a versatile and rugged I/O module designed for industrial automation applications. This multi-function isolated module features multiple channels that support both analog and digital signals, effectively reducing electrical noise and enhancing overall system reliability. Engineered for harsh industrial environments, it seamlessly integrates with DCS and PLC systems for process monitoring, machinery

Foxboro FBM203 Series – 8-Channel RTD Input Module with Channel Isolation The Foxboro FBM203 series are RTD input modules with eight isolated channels for temperature measurement. The FBM203 supports 0-320 ohms for 2- or 3-wire sensors, the FBM203b covers up to 640 ohms, the FBM203c supports 0-30 ohms, and the FBM203d is designed for 4-wire RTDs within 0-320 ohms. Each channel is electrically isolated and provides sigma-delta conversion for high accuracy. Suitable for harsh