Stainless Steel Welded Pipe

2507 welded stainless steel pipe Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefficient of thermal expansion. The high chromium, molybdenum,

304 stainless steel is the most versatile and widely used stainless steel. 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans. It is also widely used in springs, screws, architectural panelling, tubing, brewery, food, dairy and pharmaceutical production equipment. ElementType 304 (Wt.%) Carbon: 0.08 max Manganese: 2.00 max. Phosphorus: 0.045 max.

202 welded stainless steel pipe Grade 202 stainless steel is a type of Cr-Ni-Mn stainless with similar properties to A240/SUS 302 stainless steel. The toughness of grade 202 at low temperatures is excellent.It is one of the most widely used precipitation hardening grades, and possesses good corrosion resistance, toughness, high harness, and strength. ElementType 202 (Wt.%) Carbon: 0.15 max Manganese: 7.50-10.00 max. Phosphorus: 0.06 max. Sulfur: 0.03 max. Silicon 1.00 max.

201 welded stainless steel pipe 201 is part of the 200 series of austenitic stainless steel. 201 is used to produce a range of household appliances, including sinks, cooking utensils, washing machines, windows, and doors. It is also used in automotive trim, decorative architecture, railway cars, trailers, and clamps. It is not recommended for structural outdoor applications because of its susceptibility to pitting and crevice corrosion. ElementType 201 (Wt.%) Carbon: 0.15 max

304 welded stainless steel pipe 304 stainless steel is the most versatile and widely used stainless steel. 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans. It is also widely used in springs, screws, architectural panelling, tubing, brewery, food, dairy and pharmaceutical production equipment. ElementType 304 (Wt.%) Carbon: 0.08 max Manganese: 2

304L welded stainless steel pipe 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. 304L has a carbon maximum is 0.030. Austenitic Cr-Ni stainless steel. Better corrosion resistance than 302. High ductility, excellent drawing, forming, and spinning properties. Essentially non-magnetic, becomes slightly magnetic when cold worked. Low carbon content means less carbide precipitation in the heat-affected zone during welding and a

309 welded stainless steel pipe 309 is an austenitic chromium-nickel stainless steel known for its high corrosion resistance and strength. 309 has the same machining properties as 304, and can be roll formed, stamped, and drawn easily. Due to its properties, especially its ability to work under high-temperatures, you will find 309 in a wide variety of applications including: Boiler baffles, furnace components, oven lining, fireboxes, kiln Liners, sulfite liquor handling

310S welded stainless steel pipe 310S stainless steel is the low carbon version of 310 and is suggested for applications where sensitisation, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem. 310S also offeArs users an array of benefits including: outstanding corrosion resistance, good aqueous corrosion resistance, not prone to thermal fatigue and cyclic heating, and good strength in temperatures up to 2100°F. 310S is used

316L welded stainless steel pipe 316L austenitic stainless steel is a low carbon version of 316 . The low carbon helps improve weldability as compared to the 316 as well as improved corrosion resistance. The added Molybdenum in 316L gives this grade much better pitting resistance than the traditional 304L stainless. This alloy is one of the most widely used stainless steels showing up in just about every industry and is often used in seawater applications due to the pitting

321 welded stainless steel pipe 321 SS is a titanium stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18-8 type alloy with improved intergranular-corrosion resistance. This material is stabilized against chromium carbide formation by the addition of titanium. Since titanium has a stronger affinity for carbon than chromium, titanium carbide precipitates within the grains instead of forming at the grain boundaries. 321 stainless steel

409 is a heat resisting ferritic stainless steel providing good oxidation and corrosion resistance compared to carbon steel. This titanium stabilized grade was developed for automotive exhaust systems but its good formability, weldability, and corrosion resistance has led to its use in other applications. The corrosion resistance of 409 is better than coated carbon steel, similar to that of 410 stainless steel, and less than that of 304/304L stainless steel. 409 is not

Type 410S is a low-carbon, non-hardening ferritic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits

904L welded stainless steel pipe 904L is an austenitic stainless steel. In comparison to 316L, its molybdenum addition gives it superior resistance to localized attack (pitting and crevice corrosion) by chlorides and greater resistance reducing acids and in particular its copper addition gives it useful corrosion resistance to all concentrations of sulphuric acid. Its high alloying content also gives it greater resistance to chloride stress corrosion cracking, but it is still

430 welded stainless steel pipe Stainless steel grade 430 is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels. This steel is known for its good corrosion resistance and formability, coupled with practical mechanical properties. It can be used in certain chemical applications due to its resistance to nitric acid. Application Rail and road vehicles, container building, warehouse and transport devices for the sugar industry, sound

420 welded stainless steel pipe AISI Type 420 is a martensitic stainless steel that provides increased strength and hardness relative to Type 410, with moderate corrosion resistance. It is magnetic in both the annealed and hardened conditions. Maximum corrosion resistance is attained in the fully hardened or fully hardened and stress relieved condition. High carbon content results in the formation of chromium carbide compounds, providing excellent wear resistance and edge

410 welded stainless steel pipe 410 stainless steels are general-purpose martensitic stainless steels containing 11.5% chromium, which provide good corrosion resistance properties. However, the corrosion resistance of 410 steels can be further enhanced by a series of processes such as hardening, tempering and polishing. Quenching and tempering can harden 410 steels. They are generally used for applications involving mild corrosion, heat resistance and high strength.410

309S welded stainless steel pipe 309S stainless steel is a low carbon version of 309. Because of its lower carbon-content, 309S minimizes carbide precipitation, and improves weldability. It can be easily roll formed, stamped and drawn. Other key properties of 309S include good weldability and machinability, outstanding resistance to oxidation. 309S is utilized by many different industries for a number of critical applications including:oven Linings, boiler baffles, firebox

2205 welded stainless steel pipe Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades. It also demonstrates good fatigue strength, as well as outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion in