Current Collectors

PRODUCT DISPLAYStructural features and working principle of cable sliding wire: cable sliding rail block, C-shaped channel steel sliding rail, stainless steel sliding rail, this product is composed of three parts: flat cable, four-wheel trolley for carrying cable and guide rolling. The flat cable is made of non-flammable material, which can be used indoors and outdoors and places exposed to oil pollution. It has certain weather resistance, and has the advantages of smaller

PRODUCT DISPLAY Features of main parts: 1. The cross-sectional shape of the power transmission bus is square, and convex ribs similar to heat sinks are designed in the cavity. The power transmission bus can be connected by connecting plates on both sides, reliable connection, strong conductivity, easy installation of output lines, and easy heat dissipation. 2. During the installation, the power transmission busbar is shelved, and a supporting base is installed between the

PRODUCT DISPLAY The installation of power busbars has certain risks, so in order to ensure safety, special personnel must be sent to clean the construction site. Of course, if there are dedicated personnel to manage the site, the effect will be better. We must know that further management of the construction site can not only prevent the entry of some idlers, but also reduce many potential safety hazards invisibly. More importantly, some construction materials will not be

PRODUCT DISPLAY To prolong the service life of trolley lines, the most important thing is to purchase reliable quality trolley lines and choose brand manufacturers. Secondly, the standard use of trolley lines in daily production and use is also one of the reasons for extending the service life of trolley lines. Because a large inrush current will be generated when the motor is started, and a voltage drop will also occur if the trolley line is too long, so in order to protect

PRODUCT DISPLAY Although the power bus is a very good power transmission device, if it is not installed properly, it will not only fail to achieve the desired effect, but may also bring potential safety hazards. Therefore, when installing the busbar, it is necessary to do a good job in every detail, so as to avoid some problems. So how to install the bus to avoid the frequency of accidents? Professionals are invited to install. Professionals will design the installation

PRODUCT DISPLAY Features of sliding contact line: [Safety] The guide rail is insulated with high-performance engineering plastics. During operation, the human body and foreign objects cannot touch the guide rail, so as to prevent electric shock accidents and ensure safe use. [Reliable] The current collector is in good contact with the guide rail, the pressure is uniform, the tracking is flexible, dust-proof and explosion-proof, and the operation is balanced and reliable.

PRODUCT DISPLAY Compared with cables, what are the advantages of using aluminum-based power bus bars In terms of energy saving, the performance of the busbar is more prominent. The reason why the busbar can save investment for users is that it can reduce the voltage drop during operation. Less voltage drop means less power loss. Of course, it can have such energy-saving performance because of its reasonable structural design, so the current density is high, the resistance is

PRODUCT DISPLAY Angle steel sliding wire is a traditional dragging method. The conductor is directly exposed to the air, which is subject to corrosion, oxidation, dust accumulation, oil accumulation, and putty are mixed together to form insulating grease, which directly affects the conductivity. Run the machine after power failure Still relying on its mechanical inertia to continue to operate, it is easy to lose control, which may cause accidents. The shell and supporting

PRODUCT DISPLAY Introducing our Weather-Resistant Factory Current Collector: Built to withstand challenging weather conditions, our weather-resistant factory current collector ensures reliable power collection in outdoor or exposed environments. Its corrosion-resistant materials and protective coatings provide enhanced durability, making it suitable for applications such as ports, construction sites, or mining operations. Enhanced Safety: Current collectors incorporate safety

PRODUCT DISPLAY The trolley wire sheath is made of PVC material through an extruder after being heated and extruded with cold water to cool it down. During use, the temperature should not exceed about 80 degrees, otherwise the trolley wire sheath will soften and affect production The high temperature resistant and flame retardant trolley line sheath is made of epoxy resin, which will not soften when the temperature exceeds 230 degrees. Mainly used in coke oven workshop, high

PRODUCT DISPLAYThere are various structures and types of trolley lines, from the initial angle iron trolley line, channel steel trolley line, (high power consumption, poor safety) to the present H-type unipolar safety trolley line (high temperature resistant Flame retardant trolley line), tubular safety trolley line, cable trolley line (explosion-proof trolley line) seamless trolley line (sliding line with never-ending power, small current without joints), M for automatic

PRODUCT DISPLAY The high temperature resistant sliding contact wire is mainly used to supply power to the moving equipment. The high temperature resistant flame retardant sliding wire sheath is extruded with epoxy resin, and it will not soften at a high temperature of 230 degrees. It consists of two parts, slide wire guide rail (fixed part, connected to the power supply, and the normal guide rail is connected by a single length of 4m/piece or 6m/piece), collector (sliding

PRODUCT DISPLAY Introducing our Noiseless Factory Current Collector: Noise pollution can impact the working environment in factories. Our noiseless factory current collector is engineered to minimize noise generation during power collection operations. With its smooth and silent operation, it contributes to a quieter workplace while maintaining efficient power delivery. Adaptability to Different Track Configurations: Current collectors can be designed to accommodate various

PRODUCT DISPLAY When the safety trolley line is connected to the power supply, the power line should be equipped with isolating appliances and short-circuit protection appliances. If there are two or more cranes in use, it is recommended to install an inspection section at the appropriate position of the trolley line, so that if one crane needs to be repaired, the power supply of the inspection part can be disconnected through the inspection section, while the other crane can

PRODUCT DISPLAY Some advantages about the trolley line: First of all, we know that the trolley line is very safe, and it is controlled by remote control, and there is no need for personnel to operate it, which saves its manpower and material resources to a certain extent; and That is, when we mention its safety, we always talk about its insulation performance, which is very good. In this case, we need to rest assured that even if we touch the sliding contact line, we can

PRODUCT DISPLAY The trolley line of Wuxi Chimei Electric Co., Ltd. is composed of conductors, insulating sheaths, connectors, hangers, brackets, collectors and driving arms. The trolley lines of Wuxi Chimei Electric Co., Ltd. The updated products have good electrical conductivity and safety, good corrosion resistance and anti-aging, which effectively guarantee the safe operation of power transmission and transformation equipment. The trolley line characteristics of Wuxi

PRODUCT DISPLAY The 304 stainless steel cable slide rail system consists of three parts: flat flexible cable, four-wheel trolley for carrying the cable and guide rail. The flat flexible cable is made of non-flammable material (Nitronitrile or silicone rubber), which can be used indoors and outdoors and places exposed to oil pollution. It has certain weather resistance, and has the advantages of smaller bending radius and longer life than round cables. The track is formed by

PRODUCT DISPLAY Hangers, anchors and end caps: Special parts for trolley rails. The hanger is hoisting and fixing. The fixer is a device that limits the guide rail at the bracket. When the guide rail expands and contracts due to temperature changes, it guides it to extend to both sides of the fixer. The cover is installed on both ends of the guide rail for insulation protection. Both the hanger and the end cap are made of engineering plastics. Expansion section (thermal

PRODUCT DISPLAY The cable slide line is composed of three parts: flat cable, four-wheel trolley for carrying the cable and guide rolling. The flat cable is made of non-flammable material, which can be used indoors and outdoors and places exposed to oil pollution. It has certain weather resistance, and has the advantages of smaller bending radius and longer service life than round cables. The cable sliding line rolling track is formed by cold-rolled steel plate at one time to

PRODUCT DISPLAY The H-type sliding wire products are made of single poles, which can be combined into multi-poles arbitrarily. The creepage distance between poles is large, and it can be used even in places with high humidity. The heat dissipation performance of the collector is good, and the running speed is high. The unipolar current carrying capacity of the sliding wire is large, which can meet the mobile power receiving equipment with high current. The standard length of