Bently Nevada Vibration Monitoring System
Bently Nevada Machinery Condition Monitoring System 200350 High Efficiency
Bently Nevada Machinery Condition Monitoring 200350 The 200350 and 200355 Accelerometers are general purpose, case-mounted seismic transducers designed for use with Trendmaster Pro Constant Current Direct Input Card, part number 149811-02 and the Seismic Direct Input Card, part number 164746-01. The 200350 and 200355 Accelerometers are contained within a hermetically sealed, stainless steel case. The design provides an extremely rugged transducer, well suited for harsh
Bently Nevada 200155 Machinery Condition Monitoring Measurement Range in m/s2 g ±196 ±20
Bently Nevada Machinery Condition Monitoring 200155 The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecti
Bently Nevada Accelerometer Interface Standard Cable 200152-25-10 USA Manufactured
Bently Nevada Accelerometer Interface Standard Cable 200152 The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27
Bently Nevada Accelerometer Interface Standard Cable 1.5kg Part Number 200151-020-03-02
Bently Nevada Machinery Condition Monitoring 200151 The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors. The
BENTLY NEVADA Cable Assembly Velomitor Right Angle 17FT 89477-17
BENTLY NEVADA CABLE ASSEMBLY VELOMITOR RIGHT-ANGLE 17FT 89477-17 Two-conductor 18 AWG twisted, shielded cable with right angle two-socket plug at one end, terminal lugs at the other end. Used with monitors and with 21128 Velocity Transducer Housing. Min. length: 2.0 ft (0.6 m) Max. length: 99 ft (30 m) 84661-NN Feet Meters (approximate) 6 ft 1.8 m 8 ft 2.4m 10 ft 3.0 m 12 ft 3.6 m 15 ft 4.5 m 17 ft 5.0 m 20 ft 6.0 m 25 ft 7.6 m 30 ft 9.0 m 33 ft 10.0 m 50 ft 15.2 m 99 ft 30.0
BENTLY NEVADA Cable Velomitor 7meter Xa Interconnect Variety 106765-07
BENTLY NEVADA CABLE VELOMITOR 7METER XA INTERCONNECT VARIETY 106765-07 BENTLY NEVADA 106765-04 CABLE VELOMITOR 7METER XA INTERCONNECT VARIETY Simple Type: NYC 106765-AA Interconnect Cable A: Length (in meters) Minimum length 1 meter(3.3 feet) Maximum length 25 meters (82 feet) Order in increments of 3 meters.
BENTLY NEVADA Cable Velomitor 4meter Xa Interconnect Variety 106765-04
BENTLY NEVADA CABLE VELOMITOR 4METER XA INTERCONNECT VARIETY 106765-04 Terminal Housing for terminating Velomitor XA Sensor cable to bulk cable listed above. The Terminal Housing provides local connection of the Velomitor XA Sensor signal wires to the monitor field wiring. Each Terminal Housing can accommodate up to 2 Velomitor XA Sensor Cables. 106765-AA Interconnect Cable A: Length (in meters) Minimum length 1 meter(3.3 feet) Maximum length 25 meters (82 feet) Order in
148722-01 Bently Nevada 3300 XL Test Plug for Accurate Vibration Measurements
Bently Nevada 3300 XL test plug 148722-01 Bently Nevada 148722-01 3300 XL test plug. The 3300 XL Test Plug contains 3 small test pins attached to 3 color-coded 1-metre wires, each terminated in a banana plug. The 3-pin adapter plugs into the test pin holes on 3300 XL-style Proximitor sensors. You can use this test plug to check the performance of the Proximitor sensor from the test pin holes in the terminal strip without removing the field wiring. Simple Type: Accessory
Bently Nevada PROXPAC XL Proximity Transducer Assembly 330880 with 8mm Probe and IP66 Rating
Self-contained proximity transducer assembly featuring integrated 3300 XL Proximitor sensor, eliminating extension cables and separate housings. Constructed with advanced PPS thermoplastic for Type 4X/IP66 protection. Customizable with 1.5-7.5 inch standoff adapters and 1.0-30.0 inch probe penetration options for industrial applications.
Bently Nevada 165855 Cylinder Pressure Transducer with 1m Cable and 0-689 bar Range Options for Compressor Monitoring
Industrial-grade cylinder pressure transducer designed for reciprocating compressor monitoring. Features robust construction for harsh environments, NEMA 4X/IP67 protection, and pressure ranges up to 689 bar (10,000 psia). Includes temperature compensation data and integrates with 3500/77M monitoring systems for accurate asset management.
Bently Nevada 991 Thrust Transmitter with 4-20 mA Output for 5m or 7m System Lengths
Industrial-grade 2-wire thrust transmitter providing 4-20 mA axial displacement signals for machinery control systems. Features integrated proximity sensor, DIN-rail or bulkhead mounting, and compatibility with 3300 NSv probes. Certified for hazardous environments with CSA and ATEX approvals available.
Bently Nevada 3300 XL 50 mm Proximity Probe 330876 with 27.9 mm Range and AISI 304 SST Case
Industrial-grade 50 mm proximity probe system featuring 27.9 mm linear range for turbine expansion monitoring. Includes AISI 304 stainless steel construction, multiple cable length options up to 9 meters, and high-temperature FluidLoc cable with armored protection. Ideal for differential expansion measurement in large steam turbine generators.
Bently Nevada 9200 Seismoprobe Velocity Transducer with 0.2%/°C Temperature Coefficient and 4.5-15 Hz Frequency Range
Professional Bently Nevada 9200 Seismoprobe Velocity Transducer featuring moving-coil technology with 0.2%/°C sensitivity temperature coefficient. Measures absolute vibration with voltage output proportional to velocity. Available in multiple mounting angles (0-90°), cable lengths (10-50 feet), and base configurations. CSA and ATEX/IECEx certified options available.
Bently Nevada 330500 Velomitor Piezo-velocity Sensor 1270 mm/s 50 in/s Peak Vibration Monitoring
Professional Bently Nevada 330500 Velomitor Piezo-velocity Sensor with 1270 mm/s (50 in/s peak) range for absolute vibration measurement. Solid-state design with embedded electronics, no moving parts, and flexible mounting options. Features multiple agency approvals including CSA and ATEX for industrial machinery monitoring applications.
Bently Nevada 3300 XL 8mm ETR Reverse Mount Probes with M10x1 Threads and 5.0 Meter Cable Length 330196-05-30-50-CN
Complete 3300 XL 8mm proximity transducer system for industrial vibration and position measurement. Features extended temperature range, reverse mount design, and includes probe, extension cable, and proximitor sensor. Ideal for fluid-film bearing machines with CSA, ATEX, and IECEx certification options available.
Bently Nevada 21000 Proximity Probe Housing Assembly for Vibration Monitoring - 8mm/11mm Probe Options with 1.5-7.5 inch Standoff
Professional all-metal proximity probe housing assemblies for industrial vibration monitoring systems. Available in aluminum or stainless steel construction with customizable probe lengths (8mm/11mm), cable options up to 36 inches, and various mounting configurations. Features explosion-proof fittings and hazardous area approvals for reliable operation in demanding environments.