P+F Sensors

Professional 1-channel isolated safety barrier for rotation speed monitoring in explosive environments. Features 0.001-5000 Hz frequency range, dual relay outputs, ATEX/IECEx certifications, and configurable start-up override. Ideal for industrial safety applications requiring SIL 2 compliance and reliable speed monitoring in hazardous locations.

Industrial inductive proximity sensor with 3mm rated operating distance and 0-2.3mm assured range. Features dual PNP outputs, 500Hz switching frequency, and comprehensive protection features. Compliant with EN/IEC 60947-5-2 standards for reliable automation applications.

Industrial-grade M12 female cordset with 10-meter PUR cable, designed for robotics and automation. Features 4-pin A-coding, IP68/IP69 protection, oil/salt water resistance, and UL approval. Withstands 10 million drag chain and torsion cycles, operating from -40°C to 90°C with 250V/4A capacity.

Industrial-grade inductive proximity sensor featuring M12 threaded design, IP68 protection, and SIL 3 safety certification. With 2mm operating distance, 2000Hz switching frequency, and -40°C to 100°C operating range. Certified for hazardous locations with IECEx, ATEX, UL, and CCC approvals. Ideal for process industry applications requiring reliable metal detection.

Industrial 2-channel switch amplifier with SIL 2 safety certification for hazardous areas. Features 207-253V AC supply, relay contact outputs, line fault detection, and reversible operation. Compact 20mm housing with ATEX, IECEx, FM, UL, and CSA approvals for reliable operation in demanding environments.

The KFD2-CD-Ex1.32 is a 1-channel isolated barrier current driver with SIL 2 certification for safety-critical applications. Featuring 0.1% accuracy, compact 20mm housing, and 0-20mA current range, this device offers reliable signal conditioning with ATEX, UL, and IECEx approvals for hazardous environments. Ideal for industrial automation and process control systems requiring intrinsic safety compliance.

SIL 2 certified switch amplifier with 1-channel isolation for hazardous areas. Features 24V DC Power Rail supply, NAMUR inputs, relay contact output, and line fault detection. Certified for Ex ia, Ex ic, and Ex ec applications with -40°C to 70°C operating range. DIN rail mounting with comprehensive safety approvals for industrial automation systems.

Professional 1-channel surge protection barrier for signal lines, rated for 30V DC applications with 20kA surge current capacity. Features SIL 3 safety rating, ATEX and IECEx certifications, automatic reset functionality, and DIN rail mounting for industrial control systems in hazardous and non-hazardous areas.

Industrial-grade inductive proximity sensor featuring 40mm operating distance, bidirectional rotatable sensor head, and 360° LED visibility. Certified to EN/IEC 60947-5-2 standards with UL approval. Operates at -25°C to 85°C with reverse polarity and short-circuit protection for reliable automation applications.

Compact 1-channel signal conditioner with dual transistor outputs for industrial automation. Features 19-30V DC power supply, ≤700mW power dissipation, and SIL 2 safety certification. Supports dry contact or NAMUR inputs with line fault detection and reversible operation mode. Ideal for signal splitting applications in harsh environments.

The RC15-14-N3 inductive ring sensor features a 15 mm inside diameter, bistable NAMUR output, and direction detection. Supports passage speeds up to 10 m/s. IP67 rated, ATEX and UL approved, with reverse polarity protection. Ideal for high-speed metal object detection in harsh environments.

1-channel signal conditioner for RTD, thermocouple, potentiometer, or voltage input. 24V DC supply, 0/4-20mA output. SIL 2 rated, configurable via PACTware. Features line fault and sensor burnout detection. Compact 20mm housing.

16-channel HART multiplexer master with SIL 3 certification. Supports up to 15 slave units, 24 VDC supply, and HART revision 5-7. Ideal for industrial automation with reliable RS-485 communication and DIP switch configuration.

16-channel HART multiplexer slave with SIL 3 certification per IEC/EN 61508. No external power required. Compatible with KFD2-HMM-16 master. Supports HART revision 5-7. Compact DIN rail mount, IP20, wide temperature range -20 to 65°C.

The P+F KFD0-CS-Ex1.50P is a 1-channel isolated barrier repeater for industrial process control. Featuring 4-20mA signal transmission, 0.1% accuracy, and SIL 2 safety certification, this loop-powered device provides reliable isolation between hazardous and safe areas. With compact 20mm width, reverse polarity protection, and multiple international certifications including ATEX, IECEx, and UL.

1-channel isolated barrier power supply for 2-wire SMART transmitters with dual output options (0/4-20mA or 0/1-5V). Features HART communication, test sockets, and SIL 2/SC 3 safety certification. Compact 12.5mm housing with 19-30V DC input, designed for hazardous area applications with ATEX, UL, and IECEx approvals.

Industrial-grade current driver with HART communication for hazardous area applications. Features SIL 2 safety certification, 19-30V DC supply, 650Ω load capacity, and multiple international approvals including ATEX, FM, and UL. Designed for reliable signal transmission to HART I/P converters, valves, and positioners in explosive environments.

The Pepperl+Fuchs Z787 Zener Barrier provides reliable intrinsic safety protection for hazardous areas. This 2-channel DC version features 50mA fuse rating, 26.5V working voltage, and 327Ω series resistance. DIN rail mountable with ATEX, IECEx, FM, and UL certifications for industrial safety applications in explosive atmospheres.

Industrial-grade female connector with 3-pin configuration, 10-meter yellow PVC cable, and 1/2"-20 UNF threading. Features gold-plated contacts, vibration-resistant design, and high protection rating IP68/IP69K. Rated for 4A current and 300V DC operation in temperatures from -25°C to 105°C. Ideal for harsh industrial environments requiring reliable electrical connections.

Professional background suppression sensor with 20-2000mm detection range and 880nm infrared technology. Features IP67 waterproof rating, 250Hz switching frequency, and UL approval for industrial automation applications. Operates in -40°C to 60°C environments with minimal black-white difference.