Bently Nevada Vibration Monitoring System

Industrial-grade 4-20 mA vibration transmitter for centrifugal compressors, pumps, and motors. Features integrated Proximitor sensor, DIN rail mounting, and 5-meter system length. Provides reliable machinery protection with Not OK/Signal Defeat circuit and diagnostic outputs for industrial monitoring applications.

Industrial-grade 3300 XL 11 mm Proximity Transducer System featuring 3.94 V/mm output for non-contacting vibration and displacement measurements. Extended linear range with 11 mm tip, suitable for axial position, steam turbine expansion, and compressor rod measurements. Replaces 7200-series systems with comprehensive upgrade compatibility.

The Bently Nevada 1900/65A provides continuous monitoring and protection for industrial equipment. Features multiple power options (18-36 VDC, 110-220 VAC), various display configurations with cable lengths up to 250', flexible mounting options, and optional Modbus communications. Cost-effective solution for general-purpose machinery protection.

Bently Nevada 330750 and 330752 High Temperature Velomitor Systems withstand extreme environments up to 400°C (752°F). Features integrated cable design eliminating connector failures, multiple certification approvals (CSA, ATEX, IECEx), and compatible with various cable types for industrial vibration monitoring applications.

Ruggedized industrial vibration sensor with 4.5Hz frequency response, 316L stainless steel housing, and weatherproof design meeting IP-65/NEMA 4X standards. Features direct mounting capability without additional housing, suitable for demanding environments with cable lengths up to 25 meters.

Industrial-grade 20kHz vibration accelerometers with hermetically sealed stainless steel construction for harsh environments. Compatible with Trendmaster ProTIMs and 2000 systems, featuring multiple mounting options and international safety certifications. Includes comprehensive technical documentation and accessory support for complete vibration monitoring solutions.

Specialized low-frequency velocity transducer designed for cooling tower and heat-exchanger fan assemblies operating at 100-300 RPM. Features multiple mounting options, cable lengths up to 250 feet, and agency approvals including CSA/NRTL/C and ATEX/IECEx for hazardous environments. Provides accurate vibration amplitude and frequency measurement for industrial fan monitoring systems.

The Bently Nevada 2300 Vibration Monitor provides cost-effective continuous vibration monitoring for medium to low criticality machinery. Features 2-channel seismic/proximity inputs, speed input, relay outputs, and configurable 4-20mA interface. Ideal for oil & gas, power generation, and industrial applications with ATEX/IECEx/CSA certifications available.

Industrial-grade 11 mm proximity probe with Polyphenylene Sulfide tip for vibration monitoring. Features patented TipLoc and CableLoc designs providing 330N pull strength, gold-plated ClickLoc connectors, and multiple thread configurations including 5/8-18 UNF. Available in armored/unarmored variants with cable lengths from 1.0 to 9.0 meters.

Industrial-grade 11 mm extension cable for vibration monitoring systems featuring gold-plated ClickLoc connectors, armored cable options, and 330 N (75 lb) pull strength. Available in 4.0m and 8.0m lengths with multiple thread configurations and agency approvals for reliable performance in demanding environments.

Professional 3300 XL 8 mm proximity transducer system for vibration and position measurement on industrial machinery. Features complete component interchangeability, backward compatibility with 5 mm systems, and full API 670 Standard compliance for mechanical configuration, linear range, and temperature stability in demanding applications.

Professional calibration test kit for Bently Nevada vibration monitoring systems. Features universal probe mount for 5-19mm diameter probes, removable spindle micrometer assembly, and magnetic base for field use. Ensures accurate shaft vibration and position simulation for reliable industrial equipment monitoring.

24765-01-00 Bently Nevada Case Expansion Transducer Systems An important position measurement in Turbine Supervisory Instrumentation (TSI) is case expansion. Case expansion (sometimes referred to as shell expansion) is the thermal growth of the machine case as it expands during machine startup and on-line operations. The case expansion transducer system is typically mounted on the foundation at the opposite end from where the turbine casing is attached to the foundation and

Bently Nevada 3300 XL 25 mm Extension Cable 330854 The 3300 XL 25 mm probe is designed for maximum survivability in the harshest steam turbine DE environments. It can continually operate and maintain its accuracy in high temperatures up to 200 °C (392 °F), and can withstand intermittent high temperatures up to 250 °C (482 °F). The 25 mm probe has both a front and rear seal which, combined with the FluidLoc cable (standard on all 25 mm probes), prevents moisture from entering

Bently Nevada 3300 XL 25 mm Proximity Probe 330851 The 3300 XL 25 mm Transducer System consists of a separate 25 mm probe, an extension cable, and a 3300 XL 25 mm Proximitor Sensor. The 0.787 V/mm (20 mV/mil) output gives this system a linear range of 12.7 mm (500 mils). Based on this linear range, the 3300 XL 25 mm Transducer System is suitable for measuring differential expansion (DE) on midsize to large steam turbine generators caused by the difference in growth rates

Bently Nevada 3300 XL 11 mm Proximitor Sensor 330780 The 3300 XL 11 mm Proximity Transducer System consists of: 3300 XL 11 mm probe 3300 XL 11 mm extension cable 3300 XL 11 mm Proximitor Sensor1 The 3300 XL 11 mm Proximity Transducer System has a 3.94 V/mm (100 mV/mil) output for non-contacting vibration and displacement measurements on fluid film bearing machines.The large 11 mm tip enables this transducer system to have alonger linear range compared to our standard 3300 XL

Bently Nevada 3300 XL Extended Temperature Range (ETR) Extension Cable 330190 An extended temperature range (ETR) probe and ETR extension cable are available for applications in which either the probe lead or extension cable may exceed the standard 177 ˚C (350 ˚F) temperature specification. The ETR probe has an extended temperature rating for up to 218 ˚C (425 ˚F). The ETR extension cable rating is up to 260 ˚C (500 ˚F). Both the ETR probe and cable are compatible with

Bently Nevada 3300 XL 8 mm Extended Temperature Range (ETR) Reverse Mount Probes 330196 The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range,accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance

Bently Nevada 3300 NSv Proximity Probe 330901 330905 The 3300 XL NSv Proximitor Sensor has similar features to those found in the 3300 XL 8 mm Proximitor Sensor. Its thin design allows the user to mount it in either a high-density DIN-rail installation or a more traditional panel mount configuration. Improved RFI/EMI immunity allows the 3300 XL NSv Proximitor Sensor to achieve European CE mark approvals without any special mounting considerations. This RFI immunity also

Bently Nevada Machinery Condition Monitoring 330400 These accelerometers are intended for critical machinery applications where casing acceleration measurements are required, such as gear mesh monitoring. The 330400 is designed to address the requirements of American Petroleum Institute Standard 670 for accelerometers. It provides an amplitude range of 50 g peak and a sensitivity of 100 mV/g. The 330425 is identical except it provides a larger amplitude range (75 g peak) and