Industrial Crushing Equipment

Plastic Waste Shredder product description In the harmless treatment of hazardous waste and industrial solid waste, crushing treatment must be carried out to reduce volume, facilitate treatment and combustion. Therefore, our company has developed and designed a shredding equipment based on years of accumulated experience in shredder manufacturing and advanced foreign technology. It mainly consists of the main body, high alloy drive, fixed tooth cutter, main shaft, bearings

Garbage Crusher product description Garbage crusher is our technical staff in the introduction and absorption of foreign advanced technology on the basis of accumulated years of manufacturing experience, independent research and development design and production of an environmentally friendly waste reuse regeneration shredding equipment, with uniform output, high efficiency, high output, reliable performance and other advantages, can be widely used in waste recycling

Coke Cutter product description The coke cutting machine is equipped with two tooth rolls, and the tooth roll surface is divided into large (small) wolf teeth, coke cutting special teeth, ring teeth, large plate teeth, etc. It is suitable for the medium or coarse crushing occasions where the feed size is less than 800mm, and the finished product size is required to be 10-100mm (adjustable), and the requirement of less powder and more particles. It is characterized by low

Granite Crusher product description Granite crusher is suitable for crushing hard materials (compressive strength

Quartz Crusher product description Quartz stone crusher is suitable for ultra-fine crushing operations with compressive strength less than 240Mpa, moisture content less than 30%, feed particle size less than 90mm, and finished product particle size requirements of 40-120 mesh, but less than 200 mesh is better. It has the characteristics of low maintenance costs, high crushing ratio, reliable performance, low dust, and low noise. The quartz crusher is equipped with three

Coal Crusher product description The coal crusher is equipped with two toothed rollers, which are divided into large (small) wolf teeth, circular teeth, straight teeth, large plate teeth, etc. It is suitable for medium or coarse crushing situations where the feed particle size is less than 1200mm, the finished product particle size is required to be 10-300mm, and there is a requirement for less powder and more particles. It has the characteristics of low maintenance costs, no

Scrap Crusher product description This waste steel crushing line is suitable for crushing waste light steel thin materials, such as waste car body (removing engine, gearbox, tires, etc.); tinplate class (color steel tile, iron drum, cans, etc.); home appliance products (removing motor, compressor, shafts, etc.); bicycles, trucks fences, and similar wastes; cans (paint drums, oil drums, chemical drums, etc.); other waste steel (such as the density of the packages of less than

coal Gangue Crusher product description The coal gangue crusher is suitable for fine crushing operations of coal gangue materials with compressive strength less than 240Mpa and moisture content less than 15%. It has the characteristics of low maintenance costs, large crushing ratio, reliable performance, less dust, and low noise. The coal gangue crusher is equipped with three crushing rollers. According to the crushing particle size required by the user, the combination of

iron Ore Crusher product description The iron ore crusher is a self-developed crushing equipment that combines the advantages of all rolling (grinding) machines in our company's comprehensive market. It is suitable for fine crushing operations with compressive strength less than 300Mpa, humidity less than 30%, feed particle size less than 70mm, and finished product particle size requirements of 5mm or less. It can be widely used in industries such as cement, mining,

Toothed Roll Crusher product description The double toothed roller crusher is equipped with two toothed rollers, and the toothed roller surface is divided into large (small) wolf teeth, cutting coke special teeth, annular teeth, straight teeth, large plate teeth, etc. It is suitable for intermediate or coarse crushing situations where the finished product particle size requires 10-300mm and requires less powder and more particles. Such as limestone, metallic silicon, basalt,

Shaper product description The sixth-generation shaping sand making machine developed by our company integrates crushing and shaping in one machine, which is composed of body, rotor, bulk plate, hydraulic device, electric motor, impact block and circumferential guard plate. It adopts the dual-purpose bulk material tray which is convenient for the conversion of stone to stone and stone to iron; the optimized rotor flow channel with deep cavity greatly improves the material

Sand Making Machine product description The sand making machine is suitable for artificial sand making of all kinds of ores and river pebbles with compressive strength less than 250Mpa and water less than 35%, featuring low maintenance cost, low water requirement, reliable performance, low power consumption, low dust and low noise. The sand making machine is equipped with two crushing rollers, according to the granularity required by the user, the roller surface is divided

Pair (Double) Roll Crusher product description Pair (double) roll crusher is suitable for medium and fine crushing of solid materials with compressive strength less than 250Mpa and moisture less than 35%, such as crushing iron ore, quartzite, potassium (sodium) feldspar, limestone, river pebbles, silicon metal, barite, basalt, granite, steel slag, cement clinker, construction waste (concrete), shale, quicklime, coal, coke, clay, bentonite, chemical raw materials, etc. It can

Fine Crusher product description The fine crusher is suitable for ultra-fine crushing operation with compressive strength less than 260Mpa, water less than 20%, feed size less than 60mm, and finished product size 0.1-5mm. Such as crushing iron ore, quartzite, potassium (sodium) feldspar, limestone, river pebbles, silicon metal, barite, basalt, granite, steel slag, cement clinker, construction waste (concrete), shale, lime, coal, coke, clay, bentonite, chemical raw materials.

Double Roll Crusher product description double roll crusher is suitable for secondary crushing and fine crushing of solid materials with compressive strength less than 250Mpa and water content less than 35%, such as crushing iron ore, quartz stone, potassium (sodium) feldspar, limestone, river pebbles , silicon metal, barite, basalt, granite, steel slag, cement clinker, construction waste (concrete), shale, quicklime, coal, coke, clay, bentonite, chemical raw materials, etc.

Stone Crusher product description The Stone Crusher is an intelligent and environmentally friendly crushing equipment with a high crushing ratio, which can crush block ores into products with a certain particle size range. It is an industrial crushing equipment that provides high-quality 12 and 13 stones for various fields. The operating cost is low, and according to the different processing effects, it can be divided into coarse crushing, medium crushing, and fine crushing

Basalt Crusher product description The basalt crusher is suitable for solid materials with compressive strength less than 300Mpa and moisture content less than 30%, and requires fine and medium crushing operations with a high crushing ratio. Solid materials such as crushed iron ore, quartz, potassium (sodium) feldspar, limestone, river pebbles, metallic silicon, barite, basalt, granite, steel slag, cement clinker, construction waste (concrete), shale, quicklime, coal, coke,