Studded Tube

A213 T9 Studded Fin Tube Application 1. Petrochemical industry Application: Used in oil refinery, chemical plant high temperature and high pressure equipment, such as heating furnace, cracking furnace, conversion furnace, etc. Reason: high temperature resistance, corrosion resistance, suitable for dealing with corrosive media. 2. Power industry Application: Used in thermal power plant boiler superheater, reheater, economizer and so on. Reason: Maintain good mechanical

ASTM A312 TP304 Studded Fin Tube with 13Cr (SS410) Pins For Fired Heaters & Boilers It is a high-efficiency heat exchanger tube with a TP304 stainless steel base pipe and 13Cr (SS410) stainless steel stud pins welded onto the outer surface. It is a specialized industrial component designed to maximize heat transfer efficiency in demanding, high-temperature environments. It combines a corrosion-resistant base tube with metal pins (studs) welded onto its surface to increase the

ASTM A312 TP304L Stainless Steel Studded Fin Tube Ⅰ. Product Overview ASTM A312 TP304L studded fin tubes are high-performance heat transfer components designed for moderate to high temperature applications . They are ideal for environments requiring excellent corrosion resistance , fouling resistance , and effective heat transfer. These tubes are widely used in industries like power generation , chemical processing , and waste heat recovery . The base material, ASTM A312

Studded Finned Tube ASME SA335 P9 with Alloy Steel Studs for Heater and Furnace A studded finned tube is a type of heat exchanger tube that has been enhanced with studs to improve its ability to transfer heat between two mediums, typically fluids and gases. The presence of studs increases the surface area without significantly enlarging the footprint of the tube. The increased surface area allows for more efficient heat transfer, since there is more material available to

ASTM A106 Gr.B Studded Tube with CS Fins for Economizers and Air Preheaters An ASTM A106 Gr.B Studded Tube with CS (Carbon Steel) Fins is a specialized type of heat exchanger tube designed for high-efficiency heat transfer in demanding industrial applications. Here’s a detailed breakdown: 1. Base Tube: ASTM A106 Gr.B (1) Chemical Composition (ASTM A106 Gr.B) Element Composition (% Max) Carbon (C) 0.30 max Manganese (Mn) 0.29–1.06 Phosphorus (P) 0.035 max Sulfur (S) 0.035 max

ASTM A106 GR.B Carbon Steel Seamless Pipe Studded Tube For Convection Tube Product Overview The ASTM A106 Gr.B studded tube is a high-strength carbon steel seamless pipe equipped with welded studs across its outer surface. This enhanced surface area significantly improves heat transfer efficiency, making it ideal for convection sections in furnaces, boilers, and fired heaters. Key Specifications Attribute Value Studded Height 12.7mm Standard ASME SA106 Stud Height 25.4mm Stud

ASTM A335 P9 High-Frequency Welded Studded Finned Tubes – High-Efficiency Heat Transfer for Industrial Heaters Material & Design:​​ ​​Base Tube:​​ ASTM A335 P9 alloy steel (high-temperature and corrosion-resistant). ​​Fin Type:​​ Studded (spike fins for turbulent flow and 25%+ higher heat transfer vs. smooth fins). ​​Length:​​ 12 meters (customizable). ​​Key Advantages:​​ ​​Superior Heat Transfer​​: Studded fins disrupt boundary layers, maximizing thermal efficiency. ​​Robust

ASTM A312 TP304L Studded Tube with 11Cr Stud Fins for Oil and Gas Industry The ASTM A312 TP304L Studded Tube with 11Cr Stud Fins is a specialized type of heat exchanger tube designed for enhanced heat transfer in high-temperature and corrosive environments. Here's a detailed breakdown: 1. Base Tube Material: ASTM A312 TP304 (1) Chemical Composition (Weight %) The composition of ASTM A312 TP304L (UNS S30403) per ASTM A312/A312M and ASTM A999/A999M (for general requirements) is

ASTM A335 P22 Studded Tube for Process Heater Product Overview ASTM A335 P22 Studded Tube for Process Heater is a high-temperature alloy steel tube designed for demanding furnace and fired-heater applications. The base tube is manufactured from ASTM A335 Grade P22 , a chromium-molybdenum alloy steel commonly used for elevated-temperature service. Unlike conventional finned tubes, studded tubes are fitted with metallic studs welded to the outside surface of the tube. Depending

ASME SA213 T9 Alloy Steel Studded Tubes For Boilers , Furnaces ASME SA213 T9 studded tubes are a type of high-performance heat transfer tube widely used in industrial applications that require excellent thermal efficiency and resistance to high temperatures and pressures. These tubes are typically made from T9 alloy steel and are enhanced with studs (protrusions) to increase heat transfer efficiency in applications such as boilers, furnaces, and heat exchangers. Studded tubes

ASME SA213 T9 Alloy Steel Studded Tube , for Refineries and Boilers The ASME SA213 T9 Alloy Steel Studded Finned Tube is a high-performance heat exchanger component widely used in industries such as petrochemicals, power plants, refineries, and boilers. This type of finned tube combines the exceptional properties of ASME SA213 T9 alloy steel with enhanced heat transfer capabilities provided by studded fins, making it ideal for applications requiring efficient heat exchange

A213 T9 Studded Fin Tube Application 1. Power Generation: Used in boilers for steam generation. Enhances heat transfer efficiency in superheaters and economizers. 2. Chemical Processing: Employed in heat exchangers for heating and cooling processes. Suitable for handling corrosive materials due to its alloy composition. 3. Oil and Gas: Used in offshore platforms and refineries where robust heat exchange is crucial. Ideal for both heating and cooling fluids. 4. HVAC Systems:

ASTM A312 TP316L Studded Fin Tube Application Chemical industry: Used in reactors, condensers and evaporators. Oil and gas: For heat exchangers, heaters and coolers. Food and pharmaceutical: for sanitary heat exchange equipment. Power industry: Used in boilers and waste heat recovery systems. ASTM A312 TP316L Studded Fin Tube Strength Corrosion resistance: TP316L stainless steel has excellent corrosion resistance to chloride and acidic environments. High temperature

Studded Tubes ASTM A213 T9 For Furnaces In Corrosive Environment Studded Fin Tubes The nail head tube ( studded fin tube) is also called nail like ribbed tube. In petrochemical industry, nail head pipe is widely used. Especially in the convection chamber of the tubular furnace, in order to enhance the heat transfer effect outside the tube, the heat transfer element often adopts the nail head tube. Design Features Studded Fins: The fins are attached to the outer surface of the

ⅠProduct Overview Yuhong Group supplies ASTM A335 P9 studded fin tubes. Made of P9 (9Cr-1Mo) alloy steel, they suit high-temperature heat transfer with good oxidation, thermal fatigue, and corrosion resistance. 11Cr stainless steel studs are welded onto the tube surface for better high-temperature scaling resistance. This design combines strength and surface durability. The studded structure improves turbulence, reduces fouling, and maintains stable heat transfer. Widely used

Furnaces Alloy Studded Tubes ASTM A335 P5 Ideal For Corrosive Environment ASTM A335/ASME SA335 specification for seamless ferritic alloy steel pipe for high temperature service, for example: pipeline systems of power stations, petrochemical plants and oil refineries,etc.This standard encompasses multiple grades, each corresponding to a specific alloy chemical composition and performance. Grade is usually indicated by the letter "P" followed by a number, which roughly

Studded Tubes ASTM A213 T9 Used In Power Plant ASTM A213 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, T9, TP304, etc. Chemical Composition (%) Grade C Mn P S Si Cr Mo Ni V T9 0.15 0.30-0.60 0.025 0.025 0.025-1.00 8.00-10.00 0.90-1.10 ... ... Mechanical Properties Grade Tensile Strength,min Yield Strength (0.2%Offset,min) T9 60ksi (415 MPa) 30ksi (205 MPa) Studded Tubes The nail head tube (

ASTM A335 P5 Studded Finned Tubes ASTM A335 P5 Studded Finned Tubes are high-temperature alloy steel heat transfer tubes manufactured by resistance welding or automatic stud welding steel pins onto the outer surface of ASTM A335 P5 seamless tubes. The welded studs significantly increase the external heat transfer area while maintaining excellent mechanical strength under elevated temperature conditions. The P5 alloy steel grade contains approximately 5% chromium and 0.5%

ASTM A312 TP316L Studded Tube With 11-13Cr Stud Fins For Refinery Heaters This is a high-performance heat exchanger tube. It consists of a core pipe made of a corrosion-resistant stainless steel (TP316L) with small, stud-like fins (made of 11-13% Chromium steel) welded onto its outer surface. The primary purpose is to greatly increase the heat transfer surface area in demanding environments, particularly in high-temperature and corrosive applications like refinery heaters and

ASME SA213 T9 Alloy Steel Studded Tubes for Heat Exchanger , Radiator ASTM A213/ASME SA213 T9 Alloy Steel Studded Fin Tube refers to a type of Heat Exchanger Tube. The tube has studs attached to its outer surface, and these studs are typically made of a different material than the tube itself. Studded fin tubes are used to improve the efficiency of heat transfer in applications such as boilers, heat exchangers and air coolers. Studded fin tubes have studs welded on the base