Studded Tube

ASME SA335 P9 Chromium-Molybdenum Alloy Studded Finned Tubes for High-Temperature Furnace Applications High-Frequency Welded ASME SA335 P9 Studded Finned Tubes | Durable Chromium-Molybdenum Alloy for Extreme Heat Furnace Systems Product Overview Yuhong Holding Group Co., Ltd. introduces ​ASME SA335 P9 Studded Finned Tubes, engineered for high-temperature industrial applications. Utilizing high-frequency welding (HFW) technology, these tubes combine chromium-molybdenum alloy

ASME A106 Gr.B Carbon Steel Studded Fin Tube for Refinery Fired Heater Convection Section The ASME A106 Gr.B carbon steel studded fin tube is the most widely used finned tube solution for the convection section of fired heaters in oil refineries and petrochemical plants . Manufactured from seamless carbon steel base tube per ASME SA106 Grade B with resistance welded studs, it effectively extends the heat transfer surface in high-temperature flue gas service while resisting

ASTM A312 TP316L Studded Tube with 11Cr Stud Fins for Petrochemical and Refinery What is ASTM A312 TP316L Studded Tube with 11Cr Fins? ASTM A312 TP316L Studded Tube with 11Cr Fins is a type of heat exchanger tube made of TP316L stainless steel that has studs or pins welded onto its surface with fins made of low alloy steel with 11% chromium content. The studs on the tube are typically made of carbon steel or low alloy steel, and the fins are attached to the studs. The 11Cr

ASTM A312 TP347H Stainless Steel Studded Tubes For Industrial Process Heating ASTM A312 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. ASTM A312 TP347H (stabilized austenitic stainless steel with Nb/Cb addition) is a high-temperature, corrosion-resistant alloy widely applied in industrial process heating systems due to its creep resistance, oxidation resistance,

ASTM A335 P5 Studded Fin Tube with Carbon Steel Pins For Superheaters and Reheaters As a professional manufacturer of heat exchanger components, we are committed to providing high-performance, durable and cost-effective solutions for industrial heat transfer systems. Our ASTM A335 P5 Studded Fin Tube with Carbon Steel Pins is a premium heat exchange element independently developed and produced by our team, which is widely recognized and trusted by customers in the power,

ASTM A312 TP316 Stainless Steel Seamless Studded Fin Tube Ⅰ. Product Overview ASTM A312 is a standard specification for seamless/welded austenitic stainless steel pipes/tubes, suitable for high-temperature, corrosive service. TP316 (UNS S31600 / 1.4401) is a molybdenum-containing austenitic stainless steel—its core composition (16-18.5% Cr, 10-14% Ni, 2-3% Mo) endows it with excellent resistance to chloride-induced pitting, intergranular corrosion, and general corrosive media

1. What is ASTM A312 TP304 Studded Fin Tube? ASTM A312 TP304 Studded Fin Tube is a high-efficiency heat transfer solution engineered for fouling-prone and corrosive environments. It consists of a seamless austenitic stainless steel base tube (ASTM A312 TP304) with carbon steel stud-type fins resistance-welded perpendicularly to the surface. This robust design maximizes heat transfer surface area while preventing ash buildup, delivering superior corrosion resistance and 50%

Carbon Steel Seamless Pipe, ASTM A106 GR.B Studded Tube for Radiant Tube in Furnace Product Attributes Attribute Value Base Pipe ASTM A106 GR.B Packing Ply-wooden Case With Iron Frame Finish Smooth NDT HT, ECT Stud Test Hammer Test Stud Fin Height 8mm ~ 25.4mm Welding Area According to actual demand Welding Type High Frequency Welding Product Overview Studded tubes made from ASTM A106 Grade B carbon steel are specially designed for heat transfer enhancement in high-temperatur

Studded Tubes Finned Tubes Alloy Steel ASTM A335 P9 For 500℃ Working Temperature ASTM A335 / ASME SA335 P9 is a seamless ferritic alloy steel pipe, grade UNS K90941, composed of a 9Cr-1Mo alloy. P9 material exhibits excellent high-temperature creep strength and superior resistance to oxidation and sulfide corrosion. It can operate at temperatures up to 550–600°C and is suitable for high-pressure, high-temperature thermal equipment. P9 is specifically designed for high

ASTM A335 P9 Studded Fin Tube For Fired Heater,Steam Boiler ASTM A335 GR.P9 Studded Fin Tube are made from high-alloy steel and are designed for high-temperature and high-pressure applications.ASTM A335 G.P9 Studded Fin Tube maintain excellent strength and hardness at elevated temperatures, making them suitable for use in boilers and heat exchangers. This material exhibits high resistance to corrosion, making it ideal for use in chemical processing and petrochemical

ASTM A312 TP316L Stainless Steel Studded Tubes For Furnace And Oil Refinery ASTM A312 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Chemical Composition (%) Grade C Mn P S Si Cr Ni Mo TP316L 0.035 2.00 0.045 0.03 1.00 16.0-18.0 10.0-14.0 2.00-3.00 Mechanical Properties Heat Treating Temperature Tensile Strength,min Yield Strength (0.2%Offset,min) 1900°F [1040°C

Product Overview In coal-fired power stations, particularly in advanced ultra-supercritical units pursuing extreme efficiency, the use of ASME A335 P9 studded fin tubes represents a precise engineering choice to tackle extreme operating conditions and break through efficiency barriers. Modern utility boilers continuously push for higher steam parameters to achieve greater thermal efficiency, resulting in metal wall temperatures in the high-temperature superheater and reheater

ASTM A312 TP317L Studded Fin Tube With 11Cr Stud Fins For Fired Heaters ASTM A312 TP317L Studded Tube With 11Cr Stud Fins is a specialized heat exchanger tube designed for extreme environments. It consists of a base tube made from a corrosion-resistant austenitic stainless steel (TP317L), onto which small, stud-shaped fins made of an 11% Chromium ferritic steel are welded. The primary purpose is to significantly increase the tube's external surface area to improve heat

ASTM A312 TP304 Studded Tube For Petrochemical And Power Generation ASTM A312 TP304 Studded Tube is a specialized type of tube made from TP304 stainless steel with studded features designed to enhance heat transfer in heat exchangers, boilers, and various other thermal management applications. The tube is manufactured in compliance with the ASTM A312 standard, which governs the manufacturing of seamless, welded, and annealed austenitic stainless steel pipes, often used in

Studded Tubes Finned Tubes Alloy Steel ASTM A335 P9 For Furnaces In Power Plant Studded Tubes (P9 base) also called pin-finned tubes, with cylindrical studs welded in square/hexagonal arrays via ERW (electric resistance welding).ASTM A335 P9 Alloy Steel Studded Tubes & Finned Tubes are high-performance heat-exchange components specifically designed for high-temperature, high-pressure furnaces in power plants. And they combine the exceptional material properties of P9 steel

High Frequency Welding (HFW) Carbon Steel Studded Finned Tubes for Furnace Applications - High-Performance ​Product Overview Our ​Carbon Steel Studded Finned Tubes​ are engineered for superior heat transfer efficiency in demanding furnace applications. Manufactured using ​**High Frequency Welding (HFW)**​ technology, these tubes are designed to withstand high temperatures and harsh operating conditions, ensuring long-lasting performance and reliability. ​Material and

L-Type Wrapped Fin Tube | ASTM A179 Carbon Steel Base Tube + Aluminum Fins Product Introduction Our L-Type Wrapped Fin Tubes (also known as L-Foot Tension Wound Finned Tubes) are cost-effective and reliable heat transfer components widely used in medium to low temperature applications. The aluminum fin strip is formed into an L-shape and helically wound under tension around the base tube, providing a strong mechanical bond and good thermal contact. This design offers an

ASTM A335 P9 Studded Tube With 11-13Cr Stud Fins For Gas Turbine Power Plants The ASTM A335 P9 Studded Tube with 11-13Cr Stud Fins is a high-grade, engineered component that optimizes heat transfer and longevity in aggressive industrial environments. The P9 tube provides the pressure integrity, while the higher-chromium studs ensure the extended surface survives the harsh external conditions, making it a cost-effective and reliable solution for critical heat exchange duties.

A106 Gr.B Studded Tube Application Oil and gas industry: used in the construction of oil and gas Wells for pipe connection and fixation. Power industry: Used to support and fix power equipment. Furniture manufacturing: Carbon steel nail head tubes are also used in the assembly and fixing of furniture. Transportation: Structural components for vehicles such as automobiles and ships. Mechanical manufacturing: As mechanical parts or connectors, widely used in the assembly and

1. What is ASTM A213 T9 Studded Fin Tube? ASTM A213 T9 Studded Fin Tube is a high-temperature heat transfer component engineered for extreme thermal and corrosive service. It consists of a seamless chromium-molybdenum alloy steel base tube (ASTM A213 T9) with stud-type fins resistance-welded perpendicularly to the surface. This robust construction maximizes heat flux in high-ash/flue gas environments (up to 600°C/1,112°F), offering superior oxidation resistance and 3x longer