Stainless Steel Heat Exchanger Tube

YUHONG brand goods have been already exported to more than 85 countries With more than 35 years' experience, because of strict quality control policy, excellent sales service, delivery on time. YUHONG won more and more new clients and got more and more repeat orders from old clients, in YUHONG People's mind: Quality is First Important! ASME SA213 TP316 (UNS S31600) Stainless Seamless Tube for Heat Exchanger and Boiler ASME SA213 TP316 (UNS S31600) is a seamless austenitic

ASTM A268 TP430 / UNS S43000 Ferretic Stainless Steel Seamless Heat Exchanger Tube ASTM A268 TP430 (UNS S43000) is a standard specification for seamless, ferritic stainless steel tube made from Grade 430 (16–18% chromium, low nickel, no molybdenum). When used as a heat exchanger tube, it is intended for non-code or low-pressure applications where the operating environment is free of chlorides, temperatures are below 400°C (750°F) to avoid 475°C embrittlement, and resistance

ASTM A269 TP316L Stainless Steel Seamless Tube Coiled Heat Exchanger Tubing A seamless tube made of 316L stainless steel is wound into a coil. A high-pressure fluid flows through the inside of the coil, while another fluid flows over the outside. The coiled shape creates swirling vortices (Dean Vortices) that break up stagnant fluid layers, enabling extremely efficient heat transfer. The seamless 316L construction provides the mechanical strength to contain high pressures and

ASME SA213/ASTM A213 TP310S / UNS S31008 Stainless Steel Seamless Heat Exchanger Tube ASTM A213 TP310S is the correct choice for a heat exchanger tube operating in continuous high temperatures (800°C – 1100°C) in oxidizing, carburizing, or mildly sulfidizing environments. It offers excellent oxidation resistance but limited creep strength above 900°C. Do not use it for aqueous chloride service or below 550°C if long-term embrittlement is a concern. Choose TP310S when:

ASTM A268 TP405 / UNS S40500 Stainless Steel Seamless Tube Heat Exchanger Tube ASTM A268 TP405 is a low‑cost, SCC‑resistant ferritic tube ideal for moderate‑temperature heat exchangers and boilers where austenitic grades fail due to chloride cracking. Its key limitation is embrittlement at 475°C and poor low‑temperature toughness. For welded tube, post‑weld annealing is mandatory to achieve acceptable ductility. Advantages of Grade 405 ferritic stainless steel Excellent

ASTM A269 TP316L Stainless Steel Welded Tube Bright Annealed Tube Heat Exchanger Tube ASTM A269 TP316L bright-annealed welded tube is a high-performance solution for heat exchangers. This specification covers longitudinally welded austenitic tubes with low carbon (≤0.035%) to prevent intergranular corrosion—critical for thermal equipment. Bright annealing in a controlled atmosphere yields a clean, scale-free surface that minimizes fouling, enhances heat transfer, and ensures

YUHONG brand goods have been already exported to more than 85 countries With more than 35 years' experience, because of strict quality control policy, excellent sales service, delivery on time. YUHONG won more and more new clients and got more and more repeat orders from old clients, in YUHONG People's mind: Quality is First Important! Sanitary ASME SA270 TP304 Stainless Steel Bright Annealed Tube (Threaded End) This sanitary stainless steel tube is manufactured to ASME SA270

ASTM A249 TP316L Stainless Steel Welded Tube Bright Annealed Tube Heat Exchanger Tube ASTM A249 TP316L is a welded stainless steel tube specification for superheater and heat exchanger service—made from low‑carbon, molybdenum‑bearing 316L steel, fully solution annealed after welding to restore corrosion resistance, and rigorously tested to ensure reliable performance under elevated temperatures and pressures. The surface condition of Bright Annealed is used where a smooth,

ASTM A269 TP316L Stainless Steel Seamless Tube Bright Annealing Heat Exchanger Tube Heat Exchanger tubes are designed to transfer heat from one fluid to another. They require precise dimensions (outside diameter and wall thickness), excellent thermal conductivity (for stainless steel), and the ability to be expanded or rolled into tube sheets without cracking. For heat exchangers, a smooth surface improves heat transfer efficiency and is easier to keep clean (less fouling).

YUHONG brand goods have been already exported to more than 85 countries With more than 35 years' experience, because of strict quality control policy, excellent sales service, delivery on time. YUHONG won more and more new clients and got more and more repeat orders from old clients, in YUHONG People's mind: Quality is First Important! ASTM A249 TP321 Stainless Steel Welded Bright Annealed Tube, Heat Exchanger and Condenser Application A high-performance welded austenitic

YUHONG brand goods have been already exported to more than 85 countries With more than 35 years' experience, because of strict quality control policy, excellent sales service, delivery on time. YUHONG won more and more new clients and got more and more repeat orders from old clients, in YUHONG People's mind: Quality is First Important! Stainless Steel Bright Annealed Coil Tube ASTM A269 TP316 / TP316L for Potentially Corrosive Environments Stainless Steel Bright Annealed Coil

GOST 9941 12X18H12T / ANSI 321 / 1.4541 Stainless Steel Seamless Tube Petrochemical Pipeline Use GOST 9941 12X18H12T Seamless Tube is a cold-worked or warm-worked seamless stainless steel tube manufactured according to the Russian GOST 9941 standard. The steel grade 12X18H12T is a chromium-nickel austenitic stainless steel stabilized with Titanium, equivalent roughly to AISI 321 or 304H in Western standards. Its primary advantage is its resistance to intergranular corrosion

ASTM A213 TP321H / UNS S32109 Stainless Steel Seamless Tube BA Bright Annealed Tube According to ASTM A213, the final heat treatment for TP321H must be a solution anneal (thermal stabilization) at a temperature of at least 1100°C (2012°F) , followed by a rapid quench (usually water quench or rapid air cool depending on section size). This ensures the Titanium carbides are dissolved and the material is fully austenitic. TP321H is a "stabilized" stainless steel. It contains

ASTM B338 / ASME SB338 Grade 2 R50400 Titanium Tube Ti 2 Seamless Heat Exchanger Tube ASTM B338 Grade 2 Seamless Titanium Tube is the premier choice for heat transfer equipment handling seawater, brackish water, or aggressive chloride-laden chemicals. Its combination of reliable corrosion resistance, light weight, and seamless integrity makes it a long-term, low-maintenance solution for critical cooling and process applications. Comparison: Titanium Gr.2 vs. Alternatives Vs.

ASTM A213 TP304H 1.4948 Stainless Steel Seamless Tube Pickled and An Heat Exchanger Tube ASTM A213 TP304H stainless steel seamless tube is the workhorse alloy for high-temperature, high-pressure heat exchange applications. Its defining feature is the elevated carbon content ("H"), which is a deliberate formulation to ensure superior creep resistance and tensile strength at elevated temperatures, making it an essential material in the power generation and process industries.

ASTM A213 / ASME SA213 TP347 Stainless Steel Seamless Tube Pickled Annealed Heat Exchanger Tube The key of stainless steel 347 is the addition of Columbium (Niobium, Cb), typically at a minimum of 10x the carbon content. This element preferentially combines with carbon to form stable carbides, preventing chromium carbide formation. TP347 is a stabilized grade. This stabilization is its primary advantage over TP304/304H and TP316/316H. It prevents sensitization (chromium

ASTM A249 TP304 Welded Austenitic Stainless Steel Tube - Seamless Welded Construction for Boiler, Superheater, Heat Exchanger & Condenser Applications YUHONG Group, with over 35 years of industrial expertise​ and a global network serving 85 countries, is a specialized manufacturer of high-performance stainless steel tubing. Our ASTM A249 TP304 Welded Tubes​ are produced under strict quality control, meeting international standards for critical applications in boilers, heat

ASME SA213/ASTM A213 TP316L Stainless Steel Tube Seamless Heat Exchanger Tubing ASTM A213 TP316L seamless tube is a premium, low-carbon austenitic stainless steel tube designed for high-pressure, high-temperature, and highly corrosive services where long-term reliability and weldability are critical. Its seamless construction ensures maximum safety and performance in critical applications. Choose TP316L When: Operating below 60°C in chloride environments Chemical processing

ASTM A249 TP316L Welded Austenitic Stainless Steel Tube - Seamless Welded Construction for Heat Exchanger, Boiler & Condenser Applications YUHONG Group, with over 35 years of industrial expertise​ and a global network serving 85 countries, is a specialized manufacturer of high-performance stainless steel tubing. Our ASTM A249 TP316L Welded Tubes​ are produced under strict quality control, meeting international standards for critical applications in heat exchangers, boilers,

ASTM A213 TP304 Stainless Steel Seamless Tube - Heat Exchanger Tube for Boiler, Superheater and Condenser YUHONG Group, with over 35 years of expertise in supplying high-performance industrial materials to 85 countries worldwide, is a trusted manufacturer and global supplier of precision stainless steel tubing. We specialize in producing ASTM A213 TP304 Stainless Steel Seamless Tubes, engineered specifically as high-efficiency heat exchanger tubes​ for critical applications