GF Piping System

+GF+ 3-8052-1 - Cable-Terminate/Wiring-Insulate - NPT 3/4 Liquid-Tight Single Entry Sensor Junction Box Integral Mounting Kit for Direct Sensor/Transmitter Coupling The +GF+ 3‑8052‑1 is an integral mounting kit that bolts a Signet 8000‑series transmitter (8550/8450/8750/8850) directly onto the sensor insertion point—eliminating the need for a separate field bracket. This solution replaces the 3‑8050 universal base + conduit approach when you want the transmitter co‑located

+GF+ P51530-P0 - Flow-Measure/Pulse-Generate - PP PVDF Self-Powered Insertion Paddlewheel Flow Sensor Rotor-X Paddlewheel Flow Sensor Element (PP / PVDF / Ti) The +GF+ Signet P51530‑P0 is a self‑powered paddlewheel (rotor) flow sensor element for full‑pipe liquid flow in DN15 -DN100 (½-4") lines. Key specs: 0.3 -6 m/s, ± 1% FS linearity, ± 0.5% FS repeatability, Re ≥ 4500, and a sinusoidal frequency output ~19.7 Hz/(m/s) on a 7.6 m shielded twisted‑pair cable (max 60 m).

High-Flow Turbine Flow Sensor for Small-Diameter Process Lines The +GF+ Signet 3‑2100‑1H​ is a Type 2100 turbine (in-line rotor) flow sensor​ engineered for small-diameter piping​ where continuous, frequency-based flow measurement of clean liquids is required. Key parameters: 3–38 LPM (0.8–10 GPM)​ range, ±3% of reading​ linearity, ±0.5% repeatability, powered by 5–24 VDC​ with an open-collector NPN frequency output, and a 4.6 m​ shielded twisted-pair cable. Wetted materials

Insertion-Style Electromagnetic Flow Sensor for Conductive Liquids (Model 3‑2551‑V1‑11) The +GF+ Signet 3‑2551‑V1‑11​ is a blind (no‑display) insertion‑style magnetic flow sensor—part of the Signet 2551 Magmeter​ family—built for continuous, non‑intrusive flow measurement of conductive fluids in full pipes. Wetted materials are PVDF with Hastelloy‑C electrodes/grounding ring​ and FKM (Viton) O‑rings, giving strong chemical resistance for aggressive media. Key parameters: flow

+GF+ 199190644 - Chlorine-Detect/PT1000-Temp-Calibrate - PTFE Anti-Fouling Industrial Free Chlorine Electrode Spare-Part Order Code The 199 190 644 is a GF Signet 9-digit spare-part code, most likely a service/consumable kit for the pH/ORP (27xx family) or conductivity (28xx family) sensor chain. This may include a reference electrolyte refill, junction accessory, or electrode rebuild pack for 2724-2757 / 2819-2842 sensors. Compatible with DryLoc® electrode and 2750/2751/2850

+GF+ 3-2841-1V - Cond-Measure/Resist-Calculate - PVDF 1.0 Cell 3/4"NPT 15ft Cable Conductivity Resistivity Electrode Mid-Range Conductivity/Resistivity Electrode The 3-2841-1V is a K=1.0 cm⁻¹ conductivity/resistivity electrode (10-10,000 µS/cm, ~5-5,000 ppm TDS) with 316SS electrodes, PVDF insulator/process connection, PT1000 ATC, and dual-thread ¾″ NPT for inline or submersible mount on a 4.6 m shielded cable. Accuracy ± 2%, triple-orifice flow-through design reduces bubble

Plug-In Relay Expansion Module for 9900 SmartPro® Transmitter The 3‑9900.393​ is a field-installable plug-in Relay Module​ that adds two programmable SPDT dry-contact relays (5A @ 250VAC / 30VDC)​ to a panel-mount 9900‑1P​ base unit for pump/alarm switching. Automation Function & Key Advantage It lets the 9900 directly drive high‑power AC/DC loads—dosing pumps, solenoid valves, and audible alarms—with adjustable hysteresis & time delay, removing the need for external

All‑PVDF Integral Rotor‑X Paddlewheel Flow Sensor — ½–4″ Lines The +GF+ Signet 3‑8510‑V0​ is an integral‑mount paddlewheel (rotor) flow sensor​ with a native PVDF body, PVDF rotor, and Hastelloy‑C pin​ for maximum chemical resistance. Key specs: flow range 0.3–6 m/s, linearity ±1% FS, repeatability ±0.5% FS, self‑powered sinusoidal frequency output​ on a 7.6 m​ shielded cable (extendable to 60 m), and PVDF pressure rating 14 bar @ 20°C—liquid‑only, full‑pipe service.

Wet-Tap (Online Insertion/Removal) Rotor-X Paddlewheel Flow Sensor The +GF+ Signet P51530WO​ is the Wet-Tap / Withdrawal-Option​ variant of the proven Rotor-X (515 series) paddlewheel flow sensor, allowing hot-tap insertion and removal under line pressure​ without system shutdown. Key parameters: flow range 0.3–6 m/s (1–20 ft/s), linearity ±1% FS, repeatability ±0.5% FS, minimum Reynolds 4500, self-powered sinusoidal frequency output ~19.7 Hz per m/s, and a shielded 2

Conductivity/Resistivity Sensor Electronics with NPT J‑Box — Model 3‑2850‑51‑40 The +GF+ Signet 3‑2850‑51‑40​ is a Conductivity/Resistivity Sensor Electronics​ package supplied as an integral system with a K=0.1 cm⁻¹ PVDF electrode (Type 2840)​ and a ¾″ FNPT threaded junction‑box​ for standpipe, tank, or submersible mounting. Key parameters: conductivity range 0–1,000 µS/cm​ (factory span for K=0.1; overall platform covers 0.055 µS/cm–400,000 µS/cm​ / 18.2 MΩ–10 kΩ), accuracy

All‑PVDF Rotor‑X Paddlewheel Flow Sensor for Corrosive Liquid Service (DN15–DN100) The +GF+ Signet 3‑2536‑T0​ is an insertion‑style Rotor‑X paddlewheel (rotor) flow sensor​ specified for ½–4″ (DN15–DN100) pipe sizes. Its wetted path is 100% natural PVDF—body, rotor, and pin/shaft—combined with a standard FKM (Viton) O‑ring​ for broad chemical resistance. Key parameters: flow range 0.1–6 m/s (0.3–20 ft/s), linearity ±1% FS, repeatability ±0.5% FS, minimum Reynolds ~4500, and a

+GF+ 199253810 - PH-Detection/PT1000-Temp-Calibration - Glass PTFE Threaded Industrial Water pH Electrode Product Overview The 199 253 810 is a GF 9-digit spare part, likely a service kit for 2536/2537 Rotor-X paddlewheel sensors (515 family) containing rotor, Ti/Hastelloy pin, O-ring, or fitting pack. Compatible with ½ -36″ sensors and mates to 8550/5090/8900/9900 systems. Service Application Enables technicians to rebuild worn paddlewheels without replacing the sensor body,

+GF+ 3-2350-3-1 - Liquid-Temp-Detect/4-20mA-Signal-Convert - PVDF PT1000 15ft 3/4"NPT Corrosive Liquid Temperature Sensor 4-20 mA PT1000 Temperature Sensor -- PVDF, ¾″ NPT (Model 3‑2350‑3‑1) The 3‑2350‑3‑1 is a PVDF all‑molded PT1000 sensor with 4-20 mA output, ± 0.5 °C accuracy, 10 s response time, ¾″ NPT dual‑thread connection, -10…+100 °C temperature range, and 4.6 m cable. This sensor pairs with 8350/8900/9900 series instruments. Automation Applications -- Plating, RO/DI

+GF+ 3-2726-00 - pH-Value-Detect/Pt1000-Temp-Comp - PPS Bulb Tip 3/4"NPT DryLoc Industrial pH ORP Electrode Bulb-Tip General-Purpose pH Electrode -- Ryton®, PTFE Junction, DryLoc® The 3-2726-00 is a bulb-tip pH electrode (Ryton® PPS, PTFE ref. junction, FKM) with 3k Balco ATC and ¾″ MNPT for DN15-DN100 tees. Key specifications: 0-14 pH range, compatible with 2750/2751 transmitters delivering 4-20 mA or S³L signals to 8900/9900/PLC systems. Automation Role -- Clean/General

+GF+ 3-2841-1V - Cond-Measure/Resist-Compute - PVDF 1.0 Cell 3/4"NPT Shielded Cable General Purpose Conductivity Electrode Mid-Range Conductivity/Resistivity Electrode The 3‑2841‑1V is a K=1.0 cm⁻¹ conductivity/resistivity electrode covering 10 - 10,000 µS/cm (~5-5,000 ppm TDS), with 316SS electrodes, PVDF insulator, PT1000 ATC, and dual-thread ¾″ NPT for inline or submersible mount on a 4.6 m shielded cable. Accuracy ± 2%, triple-orifice flow-through reduces bubble stall,

+GF+ 3-9950.395-M - RS485-Link/Modbus-RTU-Data-Transmit - Plug-In Terminated SmartPro 9950 Transmitter Modbus Communication Module Plug-In Modbus Module for 9950 Dual-Channel Transmitter The 3‑9950.395‑M is a field‑installable Modbus module that slots into a Signet 9950 base unit, connecting it to RS485 Modbus RTU automation networks to expose CH1/CH2 readings, derived functions, 4-20 mA loop status, and relay states. Automation Role – SCADA Integration Without Extra Gateway

+GF+ 3-9900.398-1 - Signal-Split/Dual-4-20mA-Output - Plug-In Loop Powered Single Channel 9900 Transmitter Analog Expansion Module Plug-In 2nd 4-20 mA Output Module for 9900 Transmitter The +GF+ Signet 3‑9900.398‑1 is an optional plugin 4-20 mA output module that adds a second isolated loop output to a 9900 (Gen III+) base unit, letting you route primary or secondary measurement independently to a second PLC/recorder. Key Benefits and Applications This module enables dual

+GF+ 3-8550-2 - ORP-Sense/Data-Log - IP67 Anti-Corrosion Water Quality Transmitter Field-Mount Flow Transmitter with Dual Relay Outputs The +GF+ Signet 3‑8550‑2 (ProcessPro® Flow Transmitter) conditions frequency signals from Signet paddlewheel, turbine, and magmeter sensors into an isolated 4-20 mA loop output with a 2×16 LCD showing flow rate and total. Key parameters include 12-24 VDC power supply, input range of 0.5-1500 Hz, ±0.03 mA output accuracy, two SPDT relays (5A),

Mid-Range Conductivity/Resistivity Electrode — K=0.1 cm⁻¹, 316SS / ¾" NPT The +GF+ Signet 3‑2820‑1​ is a conductivity/resistivity electrode​ from the 2819–2823 series​ built for continuous ionic-strength measurement in liquid process loops. Key parameters: cell constant K=0.1 cm⁻¹, range 1–1,000 µS/cm​ (≈0.5–500 ppm TDS), accuracy ±2% of reading, with a built‑in PT1000​ for automatic temperature compensation and a 3‑wire foil‑shielded 4.6 m cable​ (extendable to 30 m). The

+GF+ 198155154 - ORP-Detect/PT1000-Temp-Compensate - Glass PTFE Compact Industrial Oxidation Reduction Electrode Product Overview The 198 155 154 is a GF Signet 9-digit spare-part code, likely a service component for the 2551 insertion magmeter (PP/PVDF variants) or 27xx pH/ORP electrode/electronics chain. This component may include O-rings, electrode accessories, or mounting hardware. Compatible with 2750/2751/2850 electronics and 8900/9900 systems with DryLoc® connectivity.