GF Piping System

+GF+ 3-2842-1V - Cond-Detect/Resist-Convert - PVDF 10 Cell 3/4"NPT Shielded Cable High Range Conductivity Electrode High-Range Conductivity Electrode -- K=10.0, PVDF/316SS, ¾″ NPT The 3-2842-1V is a K=10.0 electrode (100-200,000 µS/cm) with 316SS/PVDF, PT1000, ¾″ NPT, 4.6 m cable, pairs with 2850->Signet transmitters. Automation Role -- Brine, Blowdown & High-TDS Loops Feeds temp-compensated conductivity for cooling-tower blowdown, RO reject, brine. PVDF/316SS + flow-through

+GF+ 3-2536-P1 - Flow-Detect/Open-Collector-Pulse - PP PVDF Wide Range Insertion Paddlewheel Flow Sensor Rotor-X Paddlewheel Flow Sensor -- PP Body, 5-8″ Pipe The 3-2536-P1 is a standard-mount paddlewheel flow sensor with PP body / PVDF rotor / Ti pin for DN125-DN200 (5-8″) full-pipe liquid service, outputting an open-collector frequency from 0.1-6 m/s with ±1% FS linearity and no pressure drop. Automation Role & Key Advantages Feeds a noise-immune pulse signal into Signet

+GF+ 3-8510-P1 - Flow-Detect/Pulse-Output - PVDF Wide Turndown Paddlewheel Flow Sensor PP/PVDF/Ti Integral Paddlewheel Sensor — Open-Collector Pulse Output The +GF+ Signet 3‑8510‑P1 measures flow in ½-4″ lines with PP body, PVDF rotor, Ti pin. Key specifications: 0.3 - 6 m/s flow velocity range, ± 1% FS accuracy, 5 - 24 VDC power supply, and open-collector pulse output on 7.6 m cable. Automation Role & Typical Applications This sensor provides flow-proportional pulses to PLC

Ultra‑Pure Water Conductivity/Resistivity Electrode — K=0.01 cm⁻¹, 316SS, 25 ft Cable The +GF+ Signet 3‑2819‑1P‑025​ is a precision conductivity/resistivity electrode​ from the 2819 series, optimized for ultra‑low conductivity liquids​ such as RO/DI permeate, boiler condensate, and pharmaceutical‑grade water. Its cell constant K=0.01 cm⁻¹​ covers 0.055–100 µS/cm​ (resistivity 18.2 MΩ–10 kΩ, ≈0.02–50 ppm TDS) with ±2% of reading​ accuracy. The electrode uses 316 SS​ with PTFE

Junction Box with EasyCal® for pH/ORP Sensor Electronics Termination The +GF+ Signet 3‑8050‑2​ is a NEMA 4X / IP65-rated junction box with the patented EasyCal® access port, designed to house and terminate pH/ORP smart sensor electronics​ (such as the 3‑2751 series) when a 4–20 mA analog loop output​ is required instead of digital S³L. It contains barrier terminal blocks​ for loop wiring and sensor cable extension, a transparent cover​ for visual checks, and conduit knockouts

Batch Control Expansion Module for Signet 9900 Transmitter The +GF+ Signet 3‑9900.397​ is a plug-in Batch Module​ (accessory board, Part No. 159 310 163) that converts a Signet 3‑9900‑1P panel-mount transmitter​ (Generation II or later) into a programmable Batch Controller System (9900‑1BC). Key operational parameters include storage for up to 10 batch sizes​ with customizable batch names and individual K‑factors, compatibility with all Signet flow sensors, and screw‑secured

+GF+ 3-8051 - Pipeline-Flow-Detect/Pulse-Signal-Output - PVDF 1/2"NPT Self-Clean Corrosive Liquid Paddlewheel Flow Sensor Robust pH/ORP Electrode with Integral Pt1000 The 3‑8051 is a Ryton® pH/ORP electrode featuring double‑junction reference, Pt1000 ATC, 1″ NPT, range 0-14 pH / ±2000 mV ORP, 0-100 °C, for inline or submersion mounting. Process Monitoring & Control in Harsh Media Feeds stable pH/ORP to 9900/PLC for neutralization, scrubber, plating, wastewater. Double

+GF+ P51545 - Flow-Sense/Sine-Frequency-Output - PVDF Wet-Tap DN15-DN100 Self-Powered Insertion Rotor-X Flow Sensor Wet-Well/Standpipe Rotor-X Paddlewheel Flow Sensor (PP/PVDF/HC) The +GF+ Signet P51545 is a wet-well/standpipe Rotor-X paddlewheel with PP body, PVDF rotor, Hastelloy-C pin, and FKM seals, designed for DN50-DN900 full-pipe liquid applications. Key specifications include: 0.3-6 m/s flow range, ±1% FS/±0.5% FS accuracy, self-powered sinusoidal output on 7.6 m

+GF+ 3-2734-00 - pH-ORP-Detect/Pt1000-Temp-Comp - PPS Flat Tip 3/4"NPT General Industrial pH ORP Electrode Flat-Tip pH Electrode — Ryton®, PTFE Junction, DryLoc®, ¾″ NPT The 3-2734-00 is a flat-tip pH electrode (2734/2736 series) with Ryton® PPS body, PTFE reference junction, FKM, PT1000 ATC, ¾″ NPT for DN15-DN100 tees. Key specifications: 0-14 pH range, >95% efficiency, 10-100°C operating temperature, mates to 2750/2751 → 4-20 mA or S³L into 8900/9900/PLC. Automation Role —

+GF+ 3-9950-1 - Dual-Sensor-Acquire/Derived-Logic-Control - 1/4 DIN DC Powered LCD Dual Channel Water Quality Transmitter Field-Mount Dual-Channel Multi-Parameter Transmitter (12-32 VDC) The 3‑9950‑1 is a field-mount dual-channel SmartPro® transmitter (12-32 VDC) with 2 × isolated 4-20 mA outputs, supporting flow, pH/ORP, conductivity/resistivity, pressure, level, and dissolved oxygen measurements via S³L / frequency / 8058 iGo® technology. Features NEMA 4X rating and USB

+GF+ 3-2551-P1-11 - Flow-Count/Pulse-Transmit - PVDF Anti-Corrosion Liquid Paddlewheel Flow Blind Insertion Magmeter -- PP/316L SS for 5-8″ Pipes, Frequency/S³L Output The +GF+ Signet 3‑2551‑P1‑11 is a blind (no‑display) insertion‑style electromagnetic flow sensor with PP body and 316L SS electrodes/grounding ring , sized for DN125 -DN200 (5-8″) full‑pipe conductive liquids. Key parameters: 0.05 -10 m/s , linearity ± 1% reading +0.1% FS , repeatability ± 0.5% , min.

+GF+ 3-3719-21 - Conduct-Measure/Temp-Compensate - 316L High Accuracy Conductivity Sensor pH/ORP Wet-Tap Retraction Assembly -- 2″ NPT for 6-12″ Pipes The +GF+ Signet 3‑3719‑21 is the 3719 pH/ORP Wet-Tap retraction assembly with a 2″ NPT branch connection, sized for DN150 - DN300 (6-12″) mains. Key specifications include CPVC/FKM/316SS wetted hardware, maximum 6.9 bar @ 25°C operating pressure, ≤ 3 m/s flow velocity, double O‑ring isolation, cam‑activated SafeLoc™ lock, and

HF-Resistant Bulb-Type pH Electrode with DryLoc® Sealed Interface The +GF+ Signet 3‑2726‑HF‑10​ is a spherical (bulb-type) industrial pH sensor electrode purpose-built for aggressive media containing trace hydrofluoric acid (≤2%, pH ≤6). Its Ryton® (PPS)​ body and HF-resistant glass membrane​ deliver broad chemical resistance, while the 3 kΩ Balco thermistor​ provides automatic temperature compensation. The patented DryLoc® connector​ with gold-plated contacts creates a

Sanitary Mid‑Range Conductivity/Resistivity Electrode for Process Water Loops The +GF+ Signet 3‑2821‑S1​ is a K=1.0 cm⁻¹ conductivity/resistivity electrode​ built for continuous liquid‑quality monitoring in industrial automation. Key parameters: 10–10,000 µS/cm (≈5–5,000 ppm TDS)​ range, ±2% of reading​ accuracy (certified ±1%), PT1000​ temperature sensing/compensation, and a 3‑wire foil‑shielded 4.6 m cable​ (extendable to 30 m). The ‑S1​ variant provides a 316 SS electrode​

+GF+ P51530-P1 - Pipe-Pressure-Measure/4-20mA-Signal-Output - PVDF Ceramic 0-10bar Compact Corrosive Media Pressure Transmitter Large-Pipe Rotor-X Paddlewheel -- PP/PVDF/Ti, DN125-200 (5-8″) The P51530-P1 is a Rotor-X paddlewheel flow sensor for DN125-200 (5-8″) full-pipe liquids. Features include PP body, PVDF rotor, Ti pin, FKM construction, 0.1-6 m/s flow velocity range, ±1%FS / ±0.5%R accuracy, self-powered sinusoidal output on 7.6 m cable (maximum 60 m), and compatibilit

+GF+ 3-2751-1 - pH-ORP-Detect/EasyCal-One-Touch-Calib - PBT DryLoc 15ft Cable Inline Smart pH ORP Sensor Electronics Submersible DryLoc® pH/ORP Smart Electronics (J-Box Version) The 3‑2751‑1 is the submersible junction‑box variant of Signet's 2751 pH/ORP electronics, processing electrode millivolt into isolated 4-20 mA (12-24 VDC) or digital S³L (5-6.5 VDC) for direct PLC or 9900/9950 tie‑in. Compatible with all DryLoc pH/ORP electrodes, pH -1…15 / ORP ±2000 mV, NEMA 4X, ≤

+GF+ 3-9950.394-1 - Cond-Sensor-Reception/Resist-Data-Process - Single Channel Plug-In Conductivity Input Module For 9950 Transmitter Plug-In Modbus Module for 9950 Dual-Channel Transmitter The 3‑9950.394‑1 is a field-installable Modbus module that slots into a Signet 9950 base unit, connecting it to RS485 Modbus RTU networks to expose CH1/CH2 readings, derived values (Sum/Δ/Ratio), 4-20 mA loop status, and relay states to PLC/SCADA. Automation Role – Multi-Sensor SCADA

+GF+ 3-2842-1V - Cond-Measure/Resist-Calculate - PVDF 10.0 Cell 3/4"NPT 15ft High Range Conductivity Resistivity Electrode High-Range Conductivity Electrode The 3‑2842‑1V is a K=10.0 cm⁻¹ conductivity/resistivity electrode covering 100-200,000 µS/cm (~50-100,000 ppm TDS), featuring 316SS electrodes, PVDF insulator, PTFE seal, PT1000 ATC, and dual‑thread ¾″ NPT on a 4.6 m shielded cable. Accuracy is ±2%, with triple‑orifice flow‑through design to reduce bubble stall.

+GF+ 3-2819-1P-025 Conductivity Electrode -Cond Detect/Pt1000 Temp Compensate -316SS K0.01 for Ultrapure Water Pipeline Monitoring Ultra-Pure Conductivity/Resistivity Electrode — K=0.01, 316SS, 25 ft The 3-2819-1P-025 is a K=0.01 cm⁻¹ electrode (0.055-100 µS/cm, ≈18.2 MΩ*cm) with 316SS, PTFE, ¾″ NPT , PT1000 , ~7.6 m (25 ft) cable, pairs with 2850 → 8850/8860/8900/9900 . Applications & Advantages — RO/DI, Pharma, Semiconductor Pure-Water Feeds temperature-compensated

+GF+ 3-2450-3U - Pressure-Detect/S3L-Digital-Transmit - PVDF 0-10PSI Ultra Low Range Inline Pressure Sensor Ultra-Low Range Digital Pressure/Liquid Level Sensor (0-0.7 bar, S³L) The 3-2450-3U is an ultra-low range (0-0.7 bar / 0-10 psi) pressure/level sensor with one-piece PVDF body, flush ceramic diaphragm, FKM seal, Digital (S³L) output on 4.6 m cable, ½″ male union, ±1% FS @25°C,